thomas/CelloEffects
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

init

Browse Source
This commit is contained in:
thomas committed 2026-10-18 14:06:40 +02:00
commit 2c2202e60d
2491 files changed
+1295990
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

Drivers/STM32H7RSxx_BSP/Components/.DS_Store
Vendored
BIN
View File
Binary file not shown.
Drivers/STM32H7RSxx_BSP/Components/Common/.DS_Store
Vendored
BIN
View File
Binary file not shown.
Drivers/STM32H7RSxx_BSP/Components/Common/LICENSE.md
+27
View File
@@ -0,0 +1,27 @@
Copyright 2014-2021 STMicroelectronics.
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation and/or
other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Drivers/STM32H7RSxx_BSP/Components/Common/LICENSE.txt
+6
View File
@@ -0,0 +1,6 @@
This software component is provided to you as part of a software package and
applicable license terms are in the Package_license file. If you received this
software component outside of a package or without applicable license terms,
the terms of the BSD-3-Clause license shall apply.
You may obtain a copy of the BSD-3-Clause at:
https://opensource.org/licenses/BSD-3-Clause
Drivers/STM32H7RSxx_BSP/Components/Common/Release_Notes.html
+252
View File
@@ -0,0 +1,252 @@
<!DOCTYPE html>
<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
<head>
<meta charset="utf-8" />
<meta name="generator" content="pandoc" />
<meta name="viewport" content="width=device-width, initial-scale=1.0, user-scalable=yes" />
<title>Release Notes for BSP Common Components Drivers</title>
<style type="text/css">
code{white-space: pre-wrap;}
span.smallcaps{font-variant: small-caps;}
span.underline{text-decoration: underline;}
div.column{display: inline-block; vertical-align: top; width: 50%;}
</style>
<link rel="stylesheet" href="_htmresc/mini-st.css" />
<!--[if lt IE 9]>
<script src="//cdnjs.cloudflare.com/ajax/libs/html5shiv/3.7.3/html5shiv-printshiv.min.js"></script>
<![endif]-->
<link rel="icon" type="image/x-icon" href="_htmresc/favicon.png" />
</head>
<body>
<div class="row">
<div class="col-sm-12 col-lg-4">
<center>
<h1 id="release-notes-for-bsp-common-components-drivers"><small>Release Notes for</small> <mark>BSP Common Components Drivers</mark></h1>
<p>Copyright © 2014-2023 STMicroelectronics<br />
</p>
<a href="https://www.st.com" class="logo"><img src="_htmresc/st_logo.png" alt="ST logo" /></a>
</center>
<h1 id="purpose">Purpose</h1>
<p>This directory contains the BSP Common components drivers.</p>
</div>
<div class="col-sm-12 col-lg-8">
<h1 id="update-history">Update History</h1>
<div class="collapse">
<input type="checkbox" id="collapse-section20" checked aria-hidden="true"> <label for="collapse-section20" aria-hidden="true">V7.3.0 / 28-September-2023</label>
<div>
<h2 id="main-changes">Main Changes</h2>
<h3 id="component-release">Component release</h3>
<ul>
<li>Add Frequency, Exposure and Gain configuration function pointers in camera.h</li>
</ul>
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section19" aria-hidden="true"> <label for="collapse-section19" aria-hidden="true">V7.2.1 / 16-November-2021</label>
<div>
<h2 id="main-changes-1">Main Changes</h2>
<h3 id="component-release-1">Component release</h3>
<ul>
<li>Update licensing</li>
</ul>
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section18" aria-hidden="true"> <label for="collapse-section18" aria-hidden="true">V7.2.0 / 11-October-2021</label>
<div>
<h2 id="main-changes-2">Main Changes</h2>
<h3 id="component-release-2">Component release</h3>
<ul>
<li>Add hybrid_sensor.h to support hybrid (env and motion) sensors</li>
</ul>
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section17" aria-hidden="true"> <label for="collapse-section17" aria-hidden="true">V7.1.0 / 18-Juin-2021</label>
<div>
<h2 id="main-changes-3">Main Changes</h2>
<h3 id="component-release-3">Component release</h3>
<ul>
<li>Add ranging_sensor.h to support ranging sensors</li>
<li>Add light_sensor.h to support ambient light sensors</li>
<li>Rename UTILS_LCD_Drv_t structure into LCD_UTILS_Drv_t</li>
<li>Code spelling and formatting</li>
</ul>
<h2 id="backward-compatibility">Backward Compatibility</h2>
<ul>
<li>This release breaks compatibility with previous versions.</li>
</ul>
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section16" aria-hidden="true"> <label for="collapse-section16" aria-hidden="true">V7.0.0 / 25-February-2020</label>
<div>
<h2 id="main-changes-4">Main Changes</h2>
<h3 id="component-release-4">Component release</h3>
<ul>
<li>Rename GUI_Drv_t structure into UTILS_LCD_Drv_t</li>
</ul>
<h2 id="backward-compatibility-1">Backward Compatibility</h2>
<ul>
<li>This release breaks compatibility with previous versions.</li>
</ul>
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section15" aria-hidden="true"> <label for="collapse-section15" aria-hidden="true">V6.0.1 / 15-October-2019</label>
<div>
<h2 id="main-changes-5">Main Changes</h2>
<h3 id="component-release-5">Component release</h3>
<ul>
<li>Update st_logo.png inclusion path in Release notes.</li>
</ul>
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section14" aria-hidden="true"> <label for="collapse-section14" aria-hidden="true">V6.0.0 / 12-April-2019</label>
<div>
<h2 id="main-changes-6">Main Changes</h2>
<h3 id="component-release-6">Component release</h3>
<p>Official release of BSP Common components drivers in line with STM32Cube BSP drivers development guidelines (UM2298).</p>
<h2 id="backward-compatibility-2">Backward Compatibility</h2>
<p>This release breaks compatibility with previous versions.</p>
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section13" aria-hidden="true"> <label for="collapse-section13" aria-hidden="true">V5.1.1 / 31-August-2018</label>
<div>
<h2 id="main-changes-7">Main Changes</h2>
<p>Reformat the BSD 3-Clause license declaration in the files header (replace license terms by a web reference to OSI website where those terms lie)<br />
Correct sensor names in headers files hsensor.h and psensor.h</p>
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section12" aria-hidden="true"> <label for="collapse-section12" aria-hidden="true">V5.1.0 / 21-November-2017</label>
<div>
<h2 id="main-changes-8">Main Changes</h2>
<p>Add dpredriver.h: support of DP redriver class<br />
Add pwrmon.h: support of power monitor class<br />
Add usbtypecswitch.h: support of USB type C switch class</p>
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section11" aria-hidden="true"> <label for="collapse-section11" aria-hidden="true">V5.0.0 / 01-March-2017</label>
<div>
<h2 id="main-changes-9">Main Changes</h2>
<p>Add hsensor.h: support of humidity class<br />
Add psensor.h: support of pressure class<br />
Update tsensor.h: Temperature can be negative<br />
Update accelero.h: LowPower API can enable or disable the low power mode<br />
Update magneto.h: LowPower API can enable or disable the low power mode</p>
<h2 id="backward-compatibility-3">Backward Compatibility</h2>
<p>This release breaks compatibility with previous versions.</p>
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section10" aria-hidden="true"> <label for="collapse-section10" aria-hidden="true">V4.0.1 / 21-July-2015</label>
<div>
<h2 id="main-changes-10">Main Changes</h2>
<p>tsensor.h: Fix compilation issue on <em>TSENSOR_InitTypeDef</em></p>
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section9" aria-hidden="true"> <label for="collapse-section9" aria-hidden="true">V4.0.0 / 22-June-2015</label>
<div>
<h2 id="main-changes-11">Main Changes</h2>
<p>accelero.h: add <em>DeInit</em> field in <em>ACCELERO_DrvTypeDef</em> structure<br />
audio.h: add <em>DeInit</em> field in <em>AUDIO_DrvTypeDef</em> structure<br />
idd.h:</p>
<ul>
<li>add <em>Shunt0StabDelay</em>, <em>Shunt1StabDelay</em>, <em>Shunt2StabDelay</em>, <em>Shunt3StabDelay</em>, <em>Shunt4StabDelay</em> and <em>ShuntNbOnBoard</em> fields in <em>IDD_ConfigTypeDef</em> structure<br />
</li>
<li>rename <em>ShuntNumber</em> field to <em>ShuntNbUsed</em> in <em>IDD_ConfigTypeDef</em> structure</li>
</ul>
<p>magneto.h: add <em>DeInit</em> field in <em>MAGNETO_DrvTypeDef</em> structure</p>
<h2 id="backward-compatibility-4">Backward Compatibility</h2>
<p>This release breaks compatibility with previous versions.</p>
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section8" aria-hidden="true"> <label for="collapse-section8" aria-hidden="true">V3.0.0 / 28-April-2015</label>
<div>
<h2 id="main-changes-12">Main Changes</h2>
<p>accelero.h: add <em>LowPower</em> field in <em>ACCELERO_DrvTypeDef</em> structure<br />
magneto.h: add <em>LowPower</em> field in <em>MAGNETO_DrvTypeDef</em> structure<br />
gyro.h: add <em>DeInit</em> and <em>LowPower</em> fields in <em>GYRO_DrvTypeDef</em> structure<br />
camera.h: add CAMERA_COLOR_EFFECT_NONE define<br />
idd.h:</p>
<ul>
<li>add <em>MeasureNb</em>, <em>DeltaDelayUnit</em> and <em>DeltaDelayValue</em> fields in <em>IDD_ConfigTypeDef</em> structure<br />
</li>
<li>rename <em>PreDelay</em> field to <em>PreDelayUnit</em> in <em>IDD_ConfigTypeDef</em> structure</li>
</ul>
<h2 id="backward-compatibility-5">Backward Compatibility</h2>
<p>This release breaks compatibility with previous versions.</p>
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section7" aria-hidden="true"> <label for="collapse-section7" aria-hidden="true">V2.2.0 / 09-February-2015</label>
<div>
<h2 id="main-changes-13">Main Changes</h2>
<p>Magnetometer driver function prototypes added (magneto.h file)<br />
Update “idd.h” file to provide DeInit() and WakeUp() services in IDD current measurement driver</p>
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section6" aria-hidden="true"> <label for="collapse-section6" aria-hidden="true">V2.1.0 / 06-February-2015</label>
<div>
<h2 id="main-changes-14">Main Changes</h2>
<p>IDD current measurement driver function prototypes added (idd.h file)<br />
io.h: add new typedef enum IO_PinState with IO_PIN_RESET and IO_PIN_SET values</p>
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section5" aria-hidden="true"> <label for="collapse-section5" aria-hidden="true">V2.0.0 / 15-December-2014</label>
<div>
<h2 id="main-changes-15">Main Changes</h2>
<p>Update “io.h” file to support MFX (Multi Function eXpander) device available on some STM32 boards</p>
<ul>
<li>add new entries for <em>IO_ModeTypedef</em> enumeration structure</li>
<li>update the <em>IO_DrvTypeDef</em> structure</li>
<li>Update all return values and function parameters to uint32_t</li>
<li>Add a return value for <em>Config</em> field</li>
</ul>
<h2 id="backward-compatibility-6">Backward Compatibility</h2>
<p>This release breaks compatibility with previous versions.</p>
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section4" aria-hidden="true"> <label for="collapse-section4" aria-hidden="true">V1.2.1 / 02-December-2014</label>
<div>
<h2 id="main-changes-16">Main Changes</h2>
<p>gyro.h: change “__GIRO_H” by “__GYRO_H” to fix compilation issue under Mac OS</p>
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section3" aria-hidden="true"> <label for="collapse-section3" aria-hidden="true">V1.2.0 / 18-June-2014</label>
<div>
<h2 id="main-changes-17">Main Changes</h2>
<p>EPD (E Paper Display) driver function prototype added (epd.h file)</p>
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section2" aria-hidden="true"> <label for="collapse-section2" aria-hidden="true">V1.1.0 / 21-March-2014</label>
<div>
<h2 id="main-changes-18">Main Changes</h2>
<p>Temperature Sensor driver function prototype added</p>
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section1" aria-hidden="true"> <label for="collapse-section1" aria-hidden="true">V1.0.0 / 18-February-2014</label>
<div>
<h2 id="main-changes-19">Main Changes</h2>
<p>First official release with Accelerometer, Audio, Camera, Gyroscope, IO, LCD and Touch Screen drivers function prototypes</p>
</div>
</div>
</div>
</div>
<footer class="sticky">
For complete documentation on <mark>STM32 Microcontrollers</mark> , visit: <a href="http://www.st.com/STM32">http://www.st.com/STM32</a>
</footer>
</body>
</html>
Drivers/STM32H7RSxx_BSP/Components/Common/Release_Notes.md
+337
View File
@@ -0,0 +1,337 @@
---
pagetitle: Release Notes for BSP Common Components Drivers
lang: en
header-includes: <link rel="icon" type="image/x-icon" href="_htmresc/favicon.png" />
---
::: {.row}
::: {.col-sm-12 .col-lg-4}
<center>
# <small>Release Notes for</small> <mark>BSP Common Components Drivers</mark>
Copyright &copy; 2014-2023 STMicroelectronics\
[![ST logo](_htmresc/st_logo.png)](https://www.st.com){.logo}
</center>
# Purpose
This directory contains the BSP Common components drivers.
:::
::: {.col-sm-12 .col-lg-8}
# Update History
::: {.collapse}
<input type="checkbox" id="collapse-section20" checked aria-hidden="true">
<label for="collapse-section20" aria-hidden="true">V7.3.0 / 28-September-2023</label>
<div>
## Main Changes
### Component release
- Add Frequency, Exposure and Gain configuration function pointers in camera.h
</div>
:::
::: {.collapse}
<input type="checkbox" id="collapse-section19" aria-hidden="true">
<label for="collapse-section19" aria-hidden="true">V7.2.1 / 16-November-2021</label>
<div>
## Main Changes
### Component release
- Update licensing
</div>
:::
::: {.collapse}
<input type="checkbox" id="collapse-section18" aria-hidden="true">
<label for="collapse-section18" aria-hidden="true">V7.2.0 / 11-October-2021</label>
<div>
## Main Changes
### Component release
- Add hybrid_sensor.h to support hybrid (env and motion) sensors
</div>
:::
::: {.collapse}
<input type="checkbox" id="collapse-section17" aria-hidden="true">
<label for="collapse-section17" aria-hidden="true">V7.1.0 / 18-Juin-2021</label>
<div>
## Main Changes
### Component release
- Add ranging_sensor.h to support ranging sensors
- Add light_sensor.h to support ambient light sensors
- Rename UTILS_LCD_Drv_t structure into LCD_UTILS_Drv_t
- Code spelling and formatting
## Backward Compatibility
- This release breaks compatibility with previous versions.
</div>
:::
::: {.collapse}
<input type="checkbox" id="collapse-section16" aria-hidden="true">
<label for="collapse-section16" aria-hidden="true">V7.0.0 / 25-February-2020</label>
<div>
## Main Changes
### Component release
- Rename GUI_Drv_t structure into UTILS_LCD_Drv_t
## Backward Compatibility
- This release breaks compatibility with previous versions.
</div>
:::
::: {.collapse}
<input type="checkbox" id="collapse-section15" aria-hidden="true">
<label for="collapse-section15" aria-hidden="true">V6.0.1 / 15-October-2019</label>
<div>
## Main Changes
### Component release
- Update st_logo.png inclusion path in Release notes.
</div>
:::
::: {.collapse}
<input type="checkbox" id="collapse-section14" aria-hidden="true">
<label for="collapse-section14" aria-hidden="true">V6.0.0 / 12-April-2019</label>
<div>
## Main Changes
### Component release
Official release of BSP Common components drivers in line with STM32Cube BSP drivers development guidelines (UM2298).
## Backward Compatibility
This release breaks compatibility with previous versions.
</div>
:::
::: {.collapse}
<input type="checkbox" id="collapse-section13" aria-hidden="true">
<label for="collapse-section13" aria-hidden="true">V5.1.1 / 31-August-2018</label>
<div>
## Main Changes
Reformat the BSD 3-Clause license declaration in the files header (replace license terms by a web reference to OSI website where those terms lie)
Correct sensor names in headers files hsensor.h and psensor.h
</div>
:::
::: {.collapse}
<input type="checkbox" id="collapse-section12" aria-hidden="true">
<label for="collapse-section12" aria-hidden="true">V5.1.0 / 21-November-2017</label>
<div>
## Main Changes
Add dpredriver.h: support of DP redriver class
Add pwrmon.h: support of power monitor class
Add usbtypecswitch.h: support of USB type C switch class
</div>
:::
::: {.collapse}
<input type="checkbox" id="collapse-section11" aria-hidden="true">
<label for="collapse-section11" aria-hidden="true">V5.0.0 / 01-March-2017</label>
<div>
## Main Changes
Add hsensor.h: support of humidity class
Add psensor.h: support of pressure class
Update tsensor.h: Temperature can be negative
Update accelero.h: LowPower API can enable or disable the low power mode
Update magneto.h: LowPower API can enable or disable the low power mode
## Backward Compatibility
This release breaks compatibility with previous versions.
</div>
:::
::: {.collapse}
<input type="checkbox" id="collapse-section10" aria-hidden="true">
<label for="collapse-section10" aria-hidden="true">V4.0.1 / 21-July-2015</label>
<div>
## Main Changes
tsensor.h: Fix compilation issue on *TSENSOR_InitTypeDef*
</div>
:::
::: {.collapse}
<input type="checkbox" id="collapse-section9" aria-hidden="true">
<label for="collapse-section9" aria-hidden="true">V4.0.0 / 22-June-2015</label>
<div>
## Main Changes
accelero.h: add *DeInit* field in *ACCELERO_DrvTypeDef* structure
audio.h: add *DeInit* field in *AUDIO_DrvTypeDef* structure
idd.h:
- add *Shunt0StabDelay*, *Shunt1StabDelay*, *Shunt2StabDelay*, *Shunt3StabDelay*, *Shunt4StabDelay* and *ShuntNbOnBoard* fields in *IDD_ConfigTypeDef* structure
- rename *ShuntNumber* field to *ShuntNbUsed* in *IDD_ConfigTypeDef* structure
magneto.h: add *DeInit* field in *MAGNETO_DrvTypeDef* structure
## Backward Compatibility
This release breaks compatibility with previous versions.
</div>
:::
::: {.collapse}
<input type="checkbox" id="collapse-section8" aria-hidden="true">
<label for="collapse-section8" aria-hidden="true">V3.0.0 / 28-April-2015</label>
<div>
## Main Changes
accelero.h: add *LowPower* field in *ACCELERO_DrvTypeDef* structure
magneto.h: add *LowPower* field in *MAGNETO_DrvTypeDef* structure
gyro.h: add *DeInit* and *LowPower* fields in *GYRO_DrvTypeDef* structure
camera.h: add CAMERA_COLOR_EFFECT_NONE define
idd.h:
- add *MeasureNb*, *DeltaDelayUnit* and *DeltaDelayValue* fields in *IDD_ConfigTypeDef* structure
- rename *PreDelay* field to *PreDelayUnit* in *IDD_ConfigTypeDef* structure
## Backward Compatibility
This release breaks compatibility with previous versions.
</div>
:::
::: {.collapse}
<input type="checkbox" id="collapse-section7" aria-hidden="true">
<label for="collapse-section7" aria-hidden="true">V2.2.0 / 09-February-2015</label>
<div>
## Main Changes
Magnetometer driver function prototypes added (magneto.h file)
Update "idd.h" file to provide DeInit() and WakeUp() services in IDD current measurement driver
</div>
:::
::: {.collapse}
<input type="checkbox" id="collapse-section6" aria-hidden="true">
<label for="collapse-section6" aria-hidden="true">V2.1.0 / 06-February-2015</label>
<div>
## Main Changes
IDD current measurement driver function prototypes added (idd.h file)
io.h: add new typedef enum IO_PinState with IO_PIN_RESET and IO_PIN_SET values
</div>
:::
::: {.collapse}
<input type="checkbox" id="collapse-section5" aria-hidden="true">
<label for="collapse-section5" aria-hidden="true">V2.0.0 / 15-December-2014</label>
<div>
## Main Changes
Update "io.h" file to support MFX (Multi Function eXpander) device available on some STM32 boards
- add new entries for *IO_ModeTypedef* enumeration structure
- update the *IO_DrvTypeDef* structure
- Update all return values and function parameters to uint32_t
- Add a return value for *Config* field
## Backward Compatibility
This release breaks compatibility with previous versions.
</div>
:::
::: {.collapse}
<input type="checkbox" id="collapse-section4" aria-hidden="true">
<label for="collapse-section4" aria-hidden="true">V1.2.1 / 02-December-2014</label>
<div>
## Main Changes
gyro.h: change “__GIRO_H” by “__GYRO_H” to fix compilation issue under Mac OS
</div>
:::
::: {.collapse}
<input type="checkbox" id="collapse-section3" aria-hidden="true">
<label for="collapse-section3" aria-hidden="true">V1.2.0 / 18-June-2014</label>
<div>
## Main Changes
EPD (E Paper Display) driver function prototype added (epd.h file)
</div>
:::
::: {.collapse}
<input type="checkbox" id="collapse-section2" aria-hidden="true">
<label for="collapse-section2" aria-hidden="true">V1.1.0 / 21-March-2014</label>
<div>
## Main Changes
Temperature Sensor driver function prototype added
</div>
:::
::: {.collapse}
<input type="checkbox" id="collapse-section1" aria-hidden="true">
<label for="collapse-section1" aria-hidden="true">V1.0.0 / 18-February-2014</label>
<div>
## Main Changes
First official release with Accelerometer, Audio, Camera, Gyroscope, IO, LCD and Touch Screen drivers function prototypes
</div>
:::
:::
:::
<footer class="sticky">
For complete documentation on <mark>STM32 Microcontrollers</mark> ,
visit: [http://www.st.com/STM32](http://www.st.com/STM32)
</footer>
Drivers/STM32H7RSxx_BSP/Components/Common/_htmresc/Add button.svg
+2
View File
@@ -0,0 +1,2 @@
<?xml version="1.0" encoding="UTF-8"?>
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 200 200"><g fill="#13254a"><path d="M100 .212C44.868.212 0 44.889 0 99.788c0 55.132 44.868 100 100 100s100-44.868 100-100C200 44.889 155.132.212 100 .212zm0 181.164c-44.974 0-81.587-36.614-81.587-81.587 0-44.762 36.614-81.164 81.587-81.164 44.995 0 81.587 36.402 81.587 81.164 0 44.973-36.592 81.587-81.587 81.587z" style="fill: #e6007e;"/><path d="M141.1 88.127h-29.439V58.688c0-6.392-5.185-11.598-11.598-11.598-6.413 0-11.619 5.206-11.619 11.598v29.439H58.476c-6.392 0-11.598 5.185-11.598 11.598 0 6.413 5.206 11.619 11.598 11.619h29.968v29.968c0 6.392 5.206 11.598 11.619 11.598 6.413 0 11.598-5.206 11.598-11.598v-29.968H141.1c6.392 0 11.598-5.206 11.598-11.619 0-6.413-5.206-11.598-11.598-11.598z" style="fill: #e6007e;"/></g></svg>
Side by Side

After

Width:  |  Height:  |  Size: 832 B

Drivers/STM32H7RSxx_BSP/Components/Common/_htmresc/Update.svg
+2
View File
@@ -0,0 +1,2 @@
<?xml version="1.0" encoding="UTF-8"?>
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 200 200"><g fill="#03234b"><path d="M170.934 64.569l-.04-.055-29.049 40.038-.057.079h14.867a59.366 59.366 0 0 1-1.488 15.615c-1.158 5.318-3.807 13.448-9.848 21.977-2.766 4.118-6.375 7.726-9.208 10.408-3.426 2.857-7.461 6.095-12 8.376-8.121 4.568-17.881 7.138-28.225 7.432-10.907.248-20.201-2.61-26.072-5.052-8.283-3.479-14.111-7.807-16.85-10.078-1.254-.956-2.25-1.907-3.057-2.676a28.662 28.662 0 0 0-1.157-1.069 158.874 158.874 0 0 0-1.479-1.362l-4.435-3.956 3.569 4.81.183.243c.2.263.548.722 1.048 1.389.276.334.579.747.93 1.226l.008.01c.689.939 1.546 2.107 2.664 3.322 3 3.536 8.178 8.801 15.808 13.801 5.969 3.866 15.672 8.901 28.001 10.935a79.05 79.05 0 0 0 12.485.998c7.97 0 15.651-1.228 22.828-3.649 6.366-1.877 12.192-4.981 17.053-7.771 6.16-3.936 10.817-7.586 14.654-11.488 8.084-7.899 14.884-17.913 19.15-28.199 3.259-7.594 5.456-15.727 6.529-24.175l.055-.425.083-.641H200l-29.066-40.063zM58.159 99.232l-12.655.563c-.097-.881-.159-1.986-.227-3.474a59.184 59.184 0 0 1 1.446-16.56c1.157-5.316 3.804-13.444 9.848-21.977 2.168-3.228 5.009-6.44 9.208-10.415 3.41-2.849 7.432-6.08 12.005-8.375 8.114-4.568 17.87-7.138 28.213-7.432 10.9-.25 20.196 2.607 26.072 5.045 8.258 3.473 14.105 7.812 16.857 10.091 1.257.951 2.253 1.904 3.057 2.673l.017.016c.43.411.801.766 1.136 1.051.475.438.841.777 1.091 1.01l.138.128.248.229 4.04 3.613-3.165-4.456c-.058-.083-.312-.417-.73-.971l-.507-.67a28.922 28.922 0 0 1-.901-1.192l-.02-.027c-.69-.945-1.548-2.121-2.677-3.346-3.002-3.537-8.182-8.803-15.813-13.801-5.964-3.865-15.662-8.9-27.997-10.935-8.484-1.363-21.496-2.009-35.313 2.651-6.355 1.88-12.186 4.983-17.054 7.772-6.163 3.944-10.82 7.595-14.654 11.488-8.079 7.894-14.882 17.909-19.155 28.2-3.268 7.624-5.463 15.757-6.523 24.173-.436 3.281-.642 5.421-.664 6.926L0 101.831l30.683 38.727.042.053 27.38-41.298.054-.081z" style="fill: #e6007e;"/></g></svg>
Side by Side

After

Width:  |  Height:  |  Size: 1.9 KiB

Drivers/STM32H7RSxx_BSP/Components/Common/_htmresc/favicon.png
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 4.0 KiB

Drivers/STM32H7RSxx_BSP/Components/Common/_htmresc/mini-st.css
+1711
View File
File diff suppressed because it is too large. Load diff
Drivers/STM32H7RSxx_BSP/Components/Common/_htmresc/st_logo.png
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 7.3 KiB

Drivers/STM32H7RSxx_BSP/Components/Common/audio.h
+105
View File
@@ -0,0 +1,105 @@
/**
******************************************************************************
* @file audio.h
* @author MCD Application Team
* @brief This header file contains the common defines and functions prototypes
* for the Audio driver.
******************************************************************************
* @attention
*
* Copyright (c) 2018 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef AUDIO_H
#define AUDIO_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include <stdint.h>
/** @addtogroup BSP
* @{
*/
/** @addtogroup Components
* @{
*/
/** @addtogroup AUDIO
* @{
*/
/** @defgroup AUDIO_Exported_Constants
* @{
*/
/**
* @}
*/
/** @defgroup AUDIO_Exported_Types
* @{
*/
/** @defgroup AUDIO_Driver_structure Audio Driver structure
* @{
*/
typedef struct
{
int32_t (*Init)(void *, void *);
int32_t (*DeInit)(void *);
int32_t (*ReadID)(void *, uint32_t *);
int32_t (*Play)(void *);
int32_t (*Pause)(void *);
int32_t (*Resume)(void *);
int32_t (*Stop)(void *, uint32_t);
int32_t (*SetFrequency)(void *, uint32_t);
int32_t (*GetFrequency)(void *);
int32_t (*SetVolume)(void *, uint32_t, uint8_t);
int32_t (*GetVolume)(void *, uint32_t, uint8_t *);
int32_t (*SetMute)(void *, uint32_t);
int32_t (*SetOutputMode)(void *, uint32_t);
int32_t (*SetResolution)(void *, uint32_t);
int32_t (*GetResolution)(void *, uint32_t *);
int32_t (*SetProtocol)(void *, uint32_t);
int32_t (*GetProtocol)(void *, uint32_t *);
int32_t (*Reset)(void *);
} AUDIO_Drv_t;
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* AUDIO_H */
Drivers/STM32H7RSxx_BSP/Components/Common/camera.h
+106
View File
@@ -0,0 +1,106 @@
/**
******************************************************************************
* @file camera.h
* @author MCD Application Team
* @brief This header file contains the common defines and functions prototypes
* for the camera driver.
******************************************************************************
* @attention
*
* Copyright (c) 2018 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef CAMERA_H
#define CAMERA_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include <stdint.h>
/** @addtogroup BSP
* @{
*/
/** @addtogroup Components
* @{
*/
/** @addtogroup CAMERA
* @{
*/
/** @defgroup CAMERA_Exported_Types
* @{
*/
/**
* @}
*/
/** @defgroup CAMERA_Driver_structure Camera Driver structure
* @{
*/
typedef struct
{
int32_t (*Init)(void *, uint32_t, uint32_t);
int32_t (*DeInit)(void *);
int32_t (*ReadID)(void *, uint32_t *);
int32_t (*GetCapabilities)(void *, void *);
int32_t (*SetLightMode)(void *, uint32_t);
int32_t (*SetColorEffect)(void *, uint32_t);
int32_t (*SetBrightness)(void *, int32_t);
int32_t (*SetSaturation)(void *, int32_t);
int32_t (*SetContrast)(void *, int32_t);
int32_t (*SetHueDegree)(void *, int32_t);
int32_t (*MirrorFlipConfig)(void *, uint32_t);
int32_t (*ZoomConfig)(void *, uint32_t);
int32_t (*SetResolution)(void *, uint32_t);
int32_t (*GetResolution)(void *, uint32_t *);
int32_t (*SetPixelFormat)(void *, uint32_t);
int32_t (*GetPixelFormat)(void *, uint32_t *);
int32_t (*NightModeConfig)(void *, uint32_t);
int32_t (*SetFrequency)(void *, int32_t);
int32_t (*SetGain)(void *, int32_t);
int32_t (*SetExposure)(void *, int32_t);
} CAMERA_Drv_t;
/**
* @}
*/
/** @defgroup CAMERA_Exported_Constants
* @{
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* CAMERA_H */
Drivers/STM32H7RSxx_BSP/Components/Common/dpredriver.h
+102
View File
@@ -0,0 +1,102 @@
/**
******************************************************************************
* @file dpredriver.h
* @author MCD Application Team
* @brief This header file contains the functions prototypes for the
* DisplayPort Linear Redriver.
******************************************************************************
* @attention
*
* Copyright (c) 2018 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __DPREDRIVER_H
#define __DPREDRIVER_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include <stdint.h>
/** @addtogroup BSP
* @{
*/
/** @addtogroup Components
* @{
*/
/** @addtogroup DPREDRIVER
* @{
*/
/** @defgroup DPREDRIVER_Exported_Types
* @{
*/
/** @defgroup DPREDRIVER_Channel_Identifier Channel Identifier
* @{
*/
typedef enum
{
CHANNEL_DP0 = 0,
CHANNEL_DP1,
CHANNEL_DP2,
CHANNEL_DP3,
CHANNEL_RX1,
CHANNEL_RX2,
CHANNEL_SSTX
} DPREDRIVER_ChannelId_t;
/**
* @}
*/
/** @defgroup DPREDRIVER_Driver_structure DisplayPort Linear Redriver Driver structure
* @{
*/
typedef struct
{
uint32_t (*Init)(uint16_t);
void (*DeInit)(uint16_t);
uint32_t (*PowerOn)(uint16_t);
uint32_t (*PowerOff)(uint16_t);
uint32_t (*SetEQGain)(uint16_t, DPREDRIVER_ChannelId_t, uint8_t);
uint32_t (*EnableChannel)(uint16_t, DPREDRIVER_ChannelId_t);
uint32_t (*DisableChannel)(uint16_t, DPREDRIVER_ChannelId_t);
} DPREDRIVER_Drv_t;
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __DPREDRIVER_H */
Drivers/STM32H7RSxx_BSP/Components/Common/env_sensor.h
+95
View File
@@ -0,0 +1,95 @@
/**
******************************************************************************
* @file env_sensor.h
* @author MCD Application Team
* @brief This header file contains the functions prototypes for the
* environmental sensor driver
******************************************************************************
* @attention
*
* Copyright (c) 2017 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef ENV_SENSOR_H
#define ENV_SENSOR_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include <stdint.h>
/** @addtogroup BSP BSP
* @{
*/
/** @addtogroup COMPONENTS COMPONENTS
* @{
*/
/** @addtogroup COMMON COMMON
* @{
*/
/** @addtogroup ENV_SENSOR ENV SENSOR
* @{
*/
/** @addtogroup ENV_SENSOR_Public_Types ENV SENSOR Public types
* @{
*/
/**
* @brief ENV SENSOR driver structure definition
*/
typedef struct
{
int32_t (*Init)(void *);
int32_t (*DeInit)(void *);
int32_t (*ReadID)(void *, uint8_t *);
int32_t (*GetCapabilities)(void *, void *);
} ENV_SENSOR_CommonDrv_t;
typedef struct
{
int32_t (*Enable)(void *);
int32_t (*Disable)(void *);
int32_t (*GetOutputDataRate)(void *, float *);
int32_t (*SetOutputDataRate)(void *, float);
int32_t (*GetValue)(void *, float *);
} ENV_SENSOR_FuncDrv_t;
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* ENV_SENSOR_H */
Drivers/STM32H7RSxx_BSP/Components/Common/epd.h
+94
View File
@@ -0,0 +1,94 @@
/**
******************************************************************************
* @file epd.h
* @author MCD Application Team
* @brief This file contains all the functions prototypes for the
* EPD (E Paper Display) driver.
******************************************************************************
* @attention
*
* Copyright (c) 2015 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __EPD_H
#define __EPD_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include <stdint.h>
/** @addtogroup BSP
* @{
*/
/** @addtogroup Components
* @{
*/
/** @addtogroup Common
* @{
*/
/** @addtogroup EPD
* @{
*/
/** @defgroup EPD_Exported_Types
* @{
*/
/** @defgroup EPD_Driver_structure E Paper Display Driver structure
* @{
*/
typedef struct
{
void (*Init)(void);
void (*WritePixel)(uint8_t);
/* Optimized operation */
void (*SetDisplayWindow)(uint16_t, uint16_t, uint16_t, uint16_t);
void (*RefreshDisplay)(void);
void (*CloseChargePump)(void);
uint16_t (*GetEpdPixelWidth)(void);
uint16_t (*GetEpdPixelHeight)(void);
void (*DrawImage)(uint16_t, uint16_t, uint16_t, uint16_t, uint8_t *);
}
EPD_DrvTypeDef;
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* EPD_H */
Drivers/STM32H7RSxx_BSP/Components/Common/hybrid_sensor.h
+108
View File
@@ -0,0 +1,108 @@
/**
******************************************************************************
* @file hybrid_sensor.h
* @author MCD Application Team
* @brief This header file contains the functions prototypes for the
* hybrid sensor driver
******************************************************************************
* @attention
*
* Copyright (c) 2021 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef HYBRID_SENSOR_H
#define HYBRID_SENSOR_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include <stdint.h>
/** @addtogroup BSP BSP
* @{
*/
/** @addtogroup COMPONENTS COMPONENTS
* @{
*/
/** @addtogroup COMMON COMMON
* @{
*/
/** @addtogroup HYBRID_SENSOR HYBRID SENSOR
* @{
*/
/** @addtogroup HYBRID_SENSOR_Public_Types HYBRID SENSOR Public types
* @{
*/
/**
* @brief HYBRID SENSOR driver structure definition
*/
typedef struct
{
int32_t (*Init)(void *);
int32_t (*DeInit)(void *);
int32_t (*ReadID)(void *, uint8_t *);
int32_t (*GetCapabilities)(void *, void *);
} HYBRID_SENSOR_CommonDrv_t;
typedef struct
{
int32_t (*Enable)(void *);
int32_t (*Disable)(void *);
int32_t (*GetOutputDataRate)(void *, float *);
int32_t (*SetOutputDataRate)(void *, float);
int32_t (*GetValue)(void *, float *);
} HYBRID_ENV_SENSOR_FuncDrv_t;
typedef struct
{
int32_t (*Enable)(void *);
int32_t (*Disable)(void *);
int32_t (*GetSensitivity)(void *, float *);
int32_t (*GetOutputDataRate)(void *, float *);
int32_t (*SetOutputDataRate)(void *, float);
int32_t (*GetFullScale)(void *, int32_t *);
int32_t (*SetFullScale)(void *, int32_t);
int32_t (*GetAxes)(void *, void *);
int32_t (*GetAxesRaw)(void *, void *);
} HYBRID_MOTION_SENSOR_FuncDrv_t;
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* HYBRID_SENSOR_H */
Drivers/STM32H7RSxx_BSP/Components/Common/idd.h
+95
View File
@@ -0,0 +1,95 @@
/**
******************************************************************************
* @file idd.h
* @author MCD Application Team
* @brief This file contains all the functions prototypes for the IDD driver.
******************************************************************************
* @attention
*
* Copyright (c) 2018 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef IDD_H
#define IDD_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include <stdint.h>
/** @addtogroup BSP
* @{
*/
/** @addtogroup Components
* @{
*/
/** @addtogroup IDD
* @{
*/
/** @defgroup IDD_Exported_Types IDD Exported Types
* @{
*/
/** @defgroup IDD_Driver_structure IDD Driver structure
* @{
*/
typedef struct
{
int32_t (*Init)(void *);
int32_t (*DeInit)(void *);
int32_t (*ReadID)(void *, uint32_t *);
int32_t (*Reset)(void *);
int32_t (*LowPower)(void *);
int32_t (*WakeUp)(void *);
int32_t (*Start)(void *);
int32_t (*Config)(void *, void *);
int32_t (*GetValue)(void *, uint32_t *);
int32_t (*EnableIT)(void *);
int32_t (*DisableIT)(void *);
int32_t (*ITStatus)(void *);
int32_t (*ClearIT)(void *);
int32_t (*ErrorEnableIT)(void *);
int32_t (*ErrorClearIT)(void *);
int32_t (*ErrorGetITStatus)(void *);
int32_t (*ErrorDisableIT)(void *);
int32_t (*ErrorGetSrc)(void *);
int32_t (*ErrorGetCode)(void *);
} IDD_Drv_t;
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* IDD_H */
Drivers/STM32H7RSxx_BSP/Components/Common/io.h
+87
View File
@@ -0,0 +1,87 @@
/**
******************************************************************************
* @file io.h
* @author MCD Application Team
* @brief This file contains all the functions prototypes for the IO driver.
******************************************************************************
* @attention
*
* Copyright (c) 2018 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef IO_H
#define IO_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include <stdint.h>
/** @addtogroup BSP
* @{
*/
/** @addtogroup Components
* @{
*/
/** @addtogroup IO
* @{
*/
/** @defgroup IO_Exported_Types IO Exported Types
* @{
*/
/** @defgroup IO_Driver_structure IO Driver structure
* @{
*/
typedef struct
{
int32_t (*Init)(void *, void *);
int32_t (*DeInit)(void *);
int32_t (*ReadID)(void *, uint32_t *);
int32_t (*Reset)(void *);
int32_t (*Start)(void *, uint32_t);
int32_t (*WritePin)(void *, uint32_t, uint8_t);
int32_t (*ReadPin)(void *, uint32_t);
int32_t (*EnableIT)(void *);
int32_t (*DisableIT)(void *);
int32_t (*ITStatus)(void *, uint32_t);
int32_t (*ClearIT)(void *, uint32_t);
} IO_Drv_t;
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* IO_H */
Drivers/STM32H7RSxx_BSP/Components/Common/lcd.h
+130
View File
@@ -0,0 +1,130 @@
/**
******************************************************************************
* @file lcd.h
* @author MCD Application Team
* @brief This file contains all the functions prototypes for the LCD driver.
******************************************************************************
* @attention
*
* Copyright (c) 2018 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef LCD_H
#define LCD_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include <stdint.h>
/** @addtogroup BSP
* @{
*/
/** @addtogroup Components
* @{
*/
/** @addtogroup LCD
* @{
*/
/** @defgroup LCD_Exported_Constants LCD Exported Constants
* @{
*/
#define LCD_PIXEL_FORMAT_ARGB8888 0x00000000U /*!< ARGB8888 LTDC pixel format */
#define LCD_PIXEL_FORMAT_RGB888 0x00000001U /*!< RGB888 LTDC pixel format */
#define LCD_PIXEL_FORMAT_RGB565 0x00000002U /*!< RGB565 LTDC pixel format */
#define LCD_PIXEL_FORMAT_ARGB1555 0x00000003U /*!< ARGB1555 LTDC pixel format */
#define LCD_PIXEL_FORMAT_ARGB4444 0x00000004U /*!< ARGB4444 LTDC pixel format */
#define LCD_PIXEL_FORMAT_L8 0x00000005U /*!< L8 LTDC pixel format */
#define LCD_PIXEL_FORMAT_AL44 0x00000006U /*!< AL44 LTDC pixel format */
#define LCD_PIXEL_FORMAT_AL88 0x00000007U /*!< AL88 LTDC pixel format */
/**
* @}
*/
/** @defgroup LCD_Exported_Types
* @{
*/
/** @defgroup LCD_Driver_structure LCD Driver structure
* @{
*/
typedef struct
{
int32_t (*DrawBitmap)(uint32_t, uint32_t, uint32_t, uint8_t *);
int32_t (*FillRGBRect)(uint32_t, uint32_t, uint32_t, uint8_t *, uint32_t, uint32_t);
int32_t (*DrawHLine)(uint32_t, uint32_t, uint32_t, uint32_t, uint32_t);
int32_t (*DrawVLine)(uint32_t, uint32_t, uint32_t, uint32_t, uint32_t);
int32_t (*FillRect)(uint32_t, uint32_t, uint32_t, uint32_t, uint32_t, uint32_t);
int32_t (*GetPixel)(uint32_t, uint32_t, uint32_t, uint32_t *);
int32_t (*SetPixel)(uint32_t, uint32_t, uint32_t, uint32_t);
int32_t (*GetXSize)(uint32_t, uint32_t *);
int32_t (*GetYSize)(uint32_t, uint32_t *);
int32_t (*SetLayer)(uint32_t, uint32_t);
int32_t (*GetFormat)(uint32_t, uint32_t *);
} LCD_UTILS_Drv_t;
typedef struct
{
/* Control functions */
int32_t (*Init)(void *, uint32_t, uint32_t);
int32_t (*DeInit)(void *);
int32_t (*ReadID)(void *, uint32_t *);
int32_t (*DisplayOn)(void *);
int32_t (*DisplayOff)(void *);
int32_t (*SetBrightness)(void *, uint32_t);
int32_t (*GetBrightness)(void *, uint32_t *);
int32_t (*SetOrientation)(void *, uint32_t);
int32_t (*GetOrientation)(void *, uint32_t *);
/* Drawing functions*/
int32_t (*SetCursor)(void *, uint32_t, uint32_t);
int32_t (*DrawBitmap)(void *, uint32_t, uint32_t, uint8_t *);
int32_t (*FillRGBRect)(void *, uint32_t, uint32_t, uint8_t *, uint32_t, uint32_t);
int32_t (*DrawHLine)(void *, uint32_t, uint32_t, uint32_t, uint32_t);
int32_t (*DrawVLine)(void *, uint32_t, uint32_t, uint32_t, uint32_t);
int32_t (*FillRect)(void *, uint32_t, uint32_t, uint32_t, uint32_t, uint32_t);
int32_t (*GetPixel)(void *, uint32_t, uint32_t, uint32_t *);
int32_t (*SetPixel)(void *, uint32_t, uint32_t, uint32_t);
int32_t (*GetXSize)(void *, uint32_t *);
int32_t (*GetYSize)(void *, uint32_t *);
} LCD_Drv_t;
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* LCD_H */
Drivers/STM32H7RSxx_BSP/Components/Common/light_sensor.h
+85
View File
@@ -0,0 +1,85 @@
/**
******************************************************************************
* @file light_sensor.h
* @author IMG SW Application Team
* @brief This header file contains the common defines and functions prototypes
* for the light sensor driver.
******************************************************************************
* @attention
*
* Copyright (c) 2021 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef LIGHT_SENSOR_H
#define LIGHT_SENSOR_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include <stdint.h>
/** @addtogroup BSP
* @{
*/
/** @addtogroup Components
* @{
*/
/** @addtogroup LIGHT_SENSOR
* @{
*/
/** @defgroup LIGHT_SENSOR_Driver_structure Ranging sensor Driver structure
* @{
*/
typedef struct
{
int32_t (*Init)(void *);
int32_t (*DeInit)(void *);
int32_t (*ReadID)(void *, uint32_t *);
int32_t (*GetCapabilities)(void *, void *);
int32_t (*SetExposureTime)(void *, uint32_t);
int32_t (*GetExposureTime)(void *, uint32_t *);
int32_t (*SetGain)(void *, uint8_t, uint32_t);
int32_t (*GetGain)(void *, uint8_t, uint32_t *);
int32_t (*SetInterMeasurementTime)(void *, uint32_t);
int32_t (*GetInterMeasurementTime)(void *, uint32_t *);
int32_t (*Start)(void *, uint32_t);
int32_t (*Stop)(void *);
int32_t (*StartFlicker)(void *, uint8_t, uint8_t);
int32_t (*StopFlicker)(void *);
int32_t (*GetValues)(void *, uint32_t *);
int32_t (*SetControlMode)(void *, uint32_t, uint32_t);
} LIGHT_SENSOR_Drv_t;
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* LIGHT_SENSOR_H */
Drivers/STM32H7RSxx_BSP/Components/Common/motion_sensor.h
+99
View File
@@ -0,0 +1,99 @@
/**
******************************************************************************
* @file motion_sensor.h
* @author MCD Application Team
* @brief This header file contains the functions prototypes for the
* motion sensor driver
******************************************************************************
* @attention
*
* Copyright (c) 2017 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef MOTION_SENSOR_H
#define MOTION_SENSOR_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include <stdint.h>
/** @addtogroup BSP BSP
* @{
*/
/** @addtogroup COMPONENTS COMPONENTS
* @{
*/
/** @addtogroup COMMON COMMON
* @{
*/
/** @addtogroup MOTION_SENSOR MOTION SENSOR
* @{
*/
/** @addtogroup MOTION_SENSOR_Public_Types MOTION SENSOR Public types
* @{
*/
/**
* @brief MOTION SENSOR driver structure definition
*/
typedef struct
{
int32_t (*Init)(void *);
int32_t (*DeInit)(void *);
int32_t (*ReadID)(void *, uint8_t *);
int32_t (*GetCapabilities)(void *, void *);
} MOTION_SENSOR_CommonDrv_t;
typedef struct
{
int32_t (*Enable)(void *);
int32_t (*Disable)(void *);
int32_t (*GetSensitivity)(void *, float *);
int32_t (*GetOutputDataRate)(void *, float *);
int32_t (*SetOutputDataRate)(void *, float);
int32_t (*GetFullScale)(void *, int32_t *);
int32_t (*SetFullScale)(void *, int32_t);
int32_t (*GetAxes)(void *, void *);
int32_t (*GetAxesRaw)(void *, void *);
} MOTION_SENSOR_FuncDrv_t;
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* MOTION_SENSOR_H */
Drivers/STM32H7RSxx_BSP/Components/Common/pwrmon.h
+251
View File
@@ -0,0 +1,251 @@
/**
******************************************************************************
* @file pwrmon.h
* @author MCD Application Team
* @brief This header file contains the functions prototypes for the
* Current/Power Monitor device driver.
******************************************************************************
* @attention
*
* Copyright (c) 2018 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __PWRMON_H
#define __PWRMON_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include <stdint.h>
/** @addtogroup BSP
* @{
*/
/** @addtogroup Components
* @{
*/
/** @addtogroup PWRMON
* @{
*/
/** @defgroup PWRMON_Exported_Types
* @{
*/
/** @defgroup PWRMON_Operating_Mode_enum Power Monitor Operating Mode enums
* @{
*/
typedef enum
{
OPERATING_MODE_TRIGGERED = 0,
OPERATING_MODE_CONTINUOUS,
OPERATING_MODE_NB
} PWRMON_OperatingMode_t;
/**
* @}
*/
/** @defgroup PWRMON_Conversion_Time_enum Power Monitor Conversion_Time enums
* @{
*/
typedef enum
{
CONVERT_TIME_140 = 0,
CONVERT_TIME_204,
CONVERT_TIME_332,
CONVERT_TIME_588,
CONVERT_TIME_1100,
CONVERT_TIME_2116,
CONVERT_TIME_4156,
CONVERT_TIME_8244,
CONVERT_TIME_NB
} PWRMON_ConvertTime_t;
/**
* @}
*/
/** @defgroup PWRMON_Conversion_Time_enum Power Monitor Conversion_Time enums
* @{
*/
typedef enum
{
AVERAGING_MODE_1 = 0,
AVERAGING_MODE_4,
AVERAGING_MODE_16,
AVERAGING_MODE_64,
AVERAGING_MODE_128,
AVERAGING_MODE_256,
AVERAGING_MODE_512,
AVERAGING_MODE_1024,
AVERAGING_MODE_NB
} PWRMON_AveragingMode_t;
/**
* @}
*/
/** @defgroup PWRMON_Device_Configuration_structure Power Monitor Device Configuration structure
* @{
*/
typedef struct
{
PWRMON_ConvertTime_t ShuntConvertTime;
PWRMON_ConvertTime_t BusConvertTime;
PWRMON_AveragingMode_t AveragingMode;
} PWRMON_Config_t;
/**
* @}
*/
/** @defgroup PWRMON_Alert_Polarity_enum Power Monitor Alert Polarity enums
* @{
*/
typedef enum
{
ALERT_POLARITY_NORMAL = 0,
ALERT_POLARITY_INVERTED,
ALERT_POLARITY_NB
} PWRMON_AlertPolarity_t;
/**
* @}
*/
/** @defgroup PWRMON_Alert_Latch_Enable_enum Power Monitor Alert Latch Enable enums
* @{
*/
typedef enum
{
ALERT_LATCH_DISABLE = 0,
ALERT_LATCH_ENABLE,
ALERT_LATCH_NB
} PWRMON_AlertLatchEnable_t;
/**
* @}
*/
/** @defgroup PWRMON_Alert_Function_enum Power Monitor Alert Function enums
* @{
*/
typedef enum
{
ALERT_FUNCTION_NONE = 0,
ALERT_FUNCTION_SOL,
ALERT_FUNCTION_SUL,
ALERT_FUNCTION_BOL,
ALERT_FUNCTION_BUL,
ALERT_FUNCTION_POL,
ALERT_FUNCTION_NB,
} PWRMON_AlertFunction_t;
/**
* @}
*/
/** @defgroup PWRMON_Alert_Configuration_structure Power Monitor Alert Configuration structure
* @{
*/
typedef struct
{
PWRMON_AlertPolarity_t Polarity;
PWRMON_AlertLatchEnable_t LatchEnable;
} PWRMON_AlertPinConfig_t;
/**
* @}
*/
/** @defgroup PWRMON_Voltage_Input_enum Power Monitor Voltage Input enums
* @{
*/
typedef enum
{
VOLTAGE_INPUT_SHUNT = 0,
VOLTAGE_INPUT_BUS,
VOLTAGE_INPUT_ALL,
VOLTAGE_INPUT_NB
} PWRMON_InputSignal_t;
/**
* @}
*/
/** @defgroup PWRMON_Flag_enum Power Monitor Flag enums
* @{
*/
typedef enum
{
FLAG_ALERT_FUNCTION = 0,
FLAG_CONVERSION_READY,
FLAG_MATH_OVERFLOW,
FLAG_NB
} PWRMON_Flag_t;
/**
* @}
*/
/** @defgroup PWRMON_Driver_structure Power Monitor Driver structure
* @{
*/
typedef struct
{
void (*Init)(uint16_t, PWRMON_Config_t *);
void (*DeInit)(uint16_t);
uint16_t (*ReadId)(uint16_t);
void (*Reset)(uint16_t);
void (*SetCalibration)(uint16_t, uint16_t);
uint16_t (*GetCalibration)(uint16_t);
void (*SetAlertFunction)(uint16_t, PWRMON_AlertFunction_t);
PWRMON_AlertFunction_t (*GetAlertFunction)(uint16_t);
void (*AlertPinConfig)(uint16_t, PWRMON_AlertPinConfig_t *);
void (*SetVBusThreshold)(uint16_t, uint16_t);
uint16_t (*GetVBusThreshold)(uint16_t);
void (*SetVShuntThreshold)(uint16_t, int16_t);
int16_t (*GetVShuntThreshold)(uint16_t);
void (*SetPowerThreshold)(uint16_t, uint32_t);
uint32_t (*GetPowerThreshold)(uint16_t);
void (*AlertThresholdEnableIT)(uint16_t);
void (*AlertThresholdDisableIT)(uint16_t);
void (*ConversionReadyEnableIT)(uint16_t);
void (*ConversionReadyDisableIT)(uint16_t);
void (*StartConversion)(uint16_t, PWRMON_InputSignal_t, PWRMON_OperatingMode_t);
void (*StopConversion)(uint16_t);
uint16_t (*GetVBus)(uint16_t);
int16_t (*GetVShunt)(uint16_t);
uint16_t (*GetPower)(uint16_t);
int16_t (*GetCurrent)(uint16_t);
uint8_t (*GetFlag)(uint16_t, PWRMON_Flag_t);
} PWRMON_Drv_t;
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __PWRMON_H */
Drivers/STM32H7RSxx_BSP/Components/Common/ranging_sensor.h
+83
View File
@@ -0,0 +1,83 @@
/**
******************************************************************************
* @file ranging_sensor.h
* @author IMG SW Application Team
* @brief This header file contains the common defines and functions prototypes
* for the ranging sensor driver.
******************************************************************************
* @attention
*
* Copyright (c) 2021 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef RANGING_SENSOR_H
#define RANGING_SENSOR_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include <stdint.h>
/** @addtogroup BSP
* @{
*/
/** @addtogroup Components
* @{
*/
/** @addtogroup RANGING_SENSOR
* @{
*/
/** @defgroup RANGING_SENSOR_Driver_structure Ranging sensor Driver structure
* @{
*/
typedef struct
{
int32_t (*Init)(void *);
int32_t (*DeInit)(void *);
int32_t (*ReadID)(void *, uint32_t *);
int32_t (*GetCapabilities)(void *, void *);
int32_t (*ConfigProfile)(void *, void *);
int32_t (*ConfigROI)(void *, void *);
int32_t (*ConfigIT)(void *, void *);
int32_t (*GetDistance)(void *, void *);
int32_t (*Start)(void *, uint32_t);
int32_t (*Stop)(void *);
int32_t (*SetAddress)(void *, uint32_t);
int32_t (*GetAddress)(void *, uint32_t *);
int32_t (*SetPowerMode)(void *, uint32_t);
int32_t (*GetPowerMode)(void *, uint32_t *);
} RANGING_SENSOR_Drv_t;
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* RANGING_SENSOR_H */
Drivers/STM32H7RSxx_BSP/Components/Common/ts.h
+90
View File
@@ -0,0 +1,90 @@
/**
******************************************************************************
* @file ts.h
* @author MCD Application Team
* @brief This file contains all the functions prototypes for the Touch Screen driver.
******************************************************************************
* @attention
*
* Copyright (c) 2018 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef TS_H
#define TS_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include <stdint.h>
/** @addtogroup BSP
* @{
*/
/** @addtogroup Components
* @{
*/
/** @addtogroup TS
* @{
*/
/** @defgroup TS_Exported_Types
* @{
*/
/** @defgroup TS_Driver_structure Touch Sensor Driver structure
* @{
*/
typedef struct
{
int32_t (*Init)(void *);
int32_t (*DeInit)(void *);
int32_t (*GestureConfig)(void *, void *);
int32_t (*ReadID)(void *, uint32_t *);
int32_t (*GetState)(void *, void *);
int32_t (*GetMultiTouchState)(void *, void *);
int32_t (*GetGesture)(void *, void *);
int32_t (*GetCapabilities)(void *, void *);
int32_t (*EnableIT)(void *);
int32_t (*DisableIT)(void *);
int32_t (*ClearIT)(void *);
int32_t (*ITStatus)(void *);
} TS_Drv_t;
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* TS_H */
Drivers/STM32H7RSxx_BSP/Components/Common/usbtypecswitch.h
+112
View File
@@ -0,0 +1,112 @@
/**
******************************************************************************
* @file usbtypecswitch.h
* @author MCD Application Team
* @brief This header file contains the functions prototypes for the
* crossbar switch device for USB Type-C systems.
******************************************************************************
* @attention
*
* Copyright (c) 2018 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USBTYPECSWITCH_H
#define __USBTYPECSWITCH_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include <stdint.h>
/** @addtogroup BSP
* @{
*/
/** @addtogroup Components
* @{
*/
/** @addtogroup TYPECSWITCH
* @{
*/
/** @defgroup TYPECSWITCH_Exported_Types
* @{
*/
typedef enum
{
USB_NORMAL = 0,
USB_FLIPPED,
DFP_D_PIN_ASSIGNMENT_A_NORMAL,
DFP_D_PIN_ASSIGNMENT_A_FLIPPED,
DFP_D_PIN_ASSIGNMENT_B_NORMAL,
DFP_D_PIN_ASSIGNMENT_B_FLIPPED,
DFP_D_PIN_ASSIGNMENT_C_NORMAL,
DFP_D_PIN_ASSIGNMENT_C_FLIPPED,
DFP_D_PIN_ASSIGNMENT_D_NORMAL,
DFP_D_PIN_ASSIGNMENT_D_FLIPPED,
DFP_D_PIN_ASSIGNMENT_E_NORMAL,
DFP_D_PIN_ASSIGNMENT_E_FLIPPED,
DFP_D_PIN_ASSIGNMENT_F_NORMAL,
DFP_D_PIN_ASSIGNMENT_F_FLIPPED,
UFP_D_PIN_ASSIGNMENT_A_NORMAL,
UFP_D_PIN_ASSIGNMENT_A_FLIPPED,
UFP_D_PIN_ASSIGNMENT_B_NORMAL,
UFP_D_PIN_ASSIGNMENT_B_FLIPPED,
UFP_D_PIN_ASSIGNMENT_C_NORMAL,
UFP_D_PIN_ASSIGNMENT_C_FLIPPED,
UFP_D_PIN_ASSIGNMENT_D_NORMAL,
UFP_D_PIN_ASSIGNMENT_D_FLIPPED,
UFP_D_PIN_ASSIGNMENT_E_NORMAL,
UFP_D_PIN_ASSIGNMENT_E_FLIPPED,
UFP_D_PIN_ASSIGNMENT_F_NORMAL,
UFP_D_PIN_ASSIGNMENT_F_FLIPPED
} TYPECSWITCH_Mode_t;
/** @defgroup TYPECSWITCH_Driver_structure USB Type-C Crossbar Switch Driver structure
* @{
*/
typedef struct
{
uint32_t (*Init)(uint16_t);
void (*DeInit)(uint16_t);
uint32_t (*PowerOn)(uint16_t);
uint32_t (*PowerOff)(uint16_t);
uint32_t (*SetMode)(uint16_t, TYPECSWITCH_Mode_t);
uint32_t (*IsSupportedMode)(TYPECSWITCH_Mode_t);
} TYPECSWITCH_Drv_t;
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __USBTYPECSWITCH_H */
Drivers/STM32H7RSxx_BSP/Components/aps256xx/LICENSE.md
+27
View File
@@ -0,0 +1,27 @@
Copyright 2020(-2023) STMicroelectronics.
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation and/or
other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Drivers/STM32H7RSxx_BSP/Components/aps256xx/LICENSE.txt
+6
View File
@@ -0,0 +1,6 @@
This software component is provided to you as part of a software package and
applicable license terms are in the Package_license file. If you received this
software component outside of a package or without applicable license terms,
the terms of the BSD-3-Clause license shall apply.
You may obtain a copy of the BSD-3-Clause at:
https://opensource.org/licenses/BSD-3-Clause
Drivers/STM32H7RSxx_BSP/Components/aps256xx/Release_Notes.html
+110
View File
@@ -0,0 +1,110 @@
<!DOCTYPE html>
<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
<head>
<meta charset="utf-8" />
<meta name="generator" content="pandoc" />
<meta name="viewport" content="width=device-width, initial-scale=1.0, user-scalable=yes" />
<title>Release Notes for APS256XX 16-Bits OCTOSPI Component Driver</title>
<style type="text/css">
code{white-space: pre-wrap;}
span.smallcaps{font-variant: small-caps;}
span.underline{text-decoration: underline;}
div.column{display: inline-block; vertical-align: top; width: 50%;}
</style>
<link rel="stylesheet" href="_htmresc/mini-st_2020.css" />
<!--[if lt IE 9]>
<script src="//cdnjs.cloudflare.com/ajax/libs/html5shiv/3.7.3/html5shiv-printshiv.min.js"></script>
<![endif]-->
<link rel="icon" type="image/x-icon" href="_htmresc/favicon.png" />
</head>
<body>
<div class="row">
<div class="col-sm-12 col-lg-4">
<center>
<h1 id="release-notes-for-aps256xx-component-driver">Release Notes for <mark>APS256XX</mark> Component Driver</h1>
<p>Copyright © 2020 STMicroelectronics<br />
</p>
<a href="https://www.st.com" class="logo"><img src="_htmresc/st_logo_2020.png" alt="ST logo" /></a>
</center>
<h1 id="purpose">Purpose</h1>
<p>This driver provides a set of functions offered by APS256XX 16-Bits OCTOSPI component</p>
</div>
<div class="col-sm-12 col-lg-8">
<h1 id="update-history">Update History</h1>
<div class="collapse">
<input type="checkbox" id="collapse-section6" checked aria-hidden="true"> <label for="collapse-section6" aria-hidden="true"><strong>V1.0.6 / 08-December-2023</strong></label>
<div>
<h2 id="main-changes">Main Changes</h2>
<ul>
<li>Set correct bit in MR6 register to enter power down</li>
<li>Correct MISRA-C 2012 warning</li>
</ul>
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section5" aria-hidden="true"> <label for="collapse-section5" aria-hidden="true"><strong>V1.0.5 / 12-December-2022</strong></label>
<div>
<h2 id="main-changes-1">Main Changes</h2>
<ul>
<li>Add XSPI_CCR_SIOO macro</li>
</ul>
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section4" aria-hidden="true"> <label for="collapse-section4" aria-hidden="true"><strong>V1.0.4 / 09-February-2022</strong></label>
<div>
<h2 id="main-changes-2">Main Changes</h2>
<ul>
<li>Update license</li>
</ul>
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section4" aria-hidden="true"> <label for="collapse-section4" aria-hidden="true"><strong>V1.0.3 / 06-October-2021</strong></label>
<div>
<h2 id="main-changes-3">Main Changes</h2>
<ul>
<li>Initialize sCommand structure as 0 in “Enable Memory mapped” API to avoid Issues related to non-filled sCommand field</li>
</ul>
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section3" aria-hidden="true"> <label for="collapse-section3" aria-hidden="true"><strong>V1.0.2 / 23-September-2021</strong></label>
<div>
<h2 id="main-changes-4">Main Changes</h2>
<ul>
<li>Code formatting and spelling</li>
</ul>
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section2" aria-hidden="true"> <label for="collapse-section2" aria-hidden="true"><strong>V1.0.1 / 30-April-2021</strong></label>
<div>
<h2 id="main-changes-5">Main Changes</h2>
<ul>
<li>Code formatting and spelling</li>
<li>Update memory Command configuration values</li>
</ul>
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section1" aria-hidden="true"> <label for="collapse-section1" aria-hidden="true"><strong>V1.0.0 / 27-March-2020</strong></label>
<div>
<h2 id="main-changes-6">Main Changes</h2>
<ul>
<li>First Official Release of APS256XX 16-bits SPI Component drivers in line with STM32Cube BSP drivers development guidelines (UM2298)</li>
<li>The component drivers are composed of
<ul>
<li>component core drivers files: aps256xx.h/.c</li>
<li>component configuration file: aps256xx_conf_template.h</li>
</ul></li>
</ul>
</div>
</div>
</div>
</div>
<footer class="sticky">
For complete documentation on <mark>STM32 Microcontrollers</mark> , visit: <span style="font-color: blue;"><a href="http://www.st.com/STM32">www.st.com</a></span>
</footer>
</body>
</html>
Drivers/STM32H7RSxx_BSP/Components/aps256xx/Release_Notes.md
+120
View File
@@ -0,0 +1,120 @@
---
pagetitle: Release Notes for APS256XX 16-Bits OCTOSPI Component Driver
lang: en
header-includes: <link rel="icon" type="image/x-icon" href="_htmresc/favicon.png" />
---
::: {.row}
::: {.col-sm-12 .col-lg-4}
<center>
# Release Notes for <mark>APS256XX</mark> Component Driver
Copyright &copy; 2020 STMicroelectronics\
[![ST logo](_htmresc/st_logo_2020.png)](https://www.st.com){.logo}
</center>
# Purpose
This driver provides a set of functions offered by APS256XX 16-Bits OCTOSPI component
:::
::: {.col-sm-12 .col-lg-8}
# Update History
::: {.collapse}
<input type="checkbox" id="collapse-section6" checked aria-hidden="true">
<label for="collapse-section6" aria-hidden="true">__V1.0.6 / 08-December-2023__</label>
<div>
## Main Changes
- Set correct bit in MR6 register to enter power down
- Correct MISRA-C 2012 warning
</div>
:::
::: {.collapse}
<input type="checkbox" id="collapse-section5" aria-hidden="true">
<label for="collapse-section5" aria-hidden="true">__V1.0.5 / 12-December-2022__</label>
<div>
## Main Changes
- Add XSPI_CCR_SIOO macro
</div>
:::
::: {.collapse}
<input type="checkbox" id="collapse-section4" aria-hidden="true">
<label for="collapse-section4" aria-hidden="true">__V1.0.4 / 09-February-2022__</label>
<div>
## Main Changes
- Update license
</div>
:::
::: {.collapse}
<input type="checkbox" id="collapse-section4" aria-hidden="true">
<label for="collapse-section4" aria-hidden="true">__V1.0.3 / 06-October-2021__</label>
<div>
## Main Changes
- Initialize sCommand structure as 0 in “Enable Memory mapped” API to avoid Issues related to non-filled sCommand field
</div>
:::
::: {.collapse}
<input type="checkbox" id="collapse-section3" aria-hidden="true">
<label for="collapse-section3" aria-hidden="true">__V1.0.2 / 23-September-2021__</label>
<div>
## Main Changes
- Code formatting and spelling
</div>
:::
::: {.collapse}
<input type="checkbox" id="collapse-section2" aria-hidden="true">
<label for="collapse-section2" aria-hidden="true">__V1.0.1 / 30-April-2021__</label>
<div>
## Main Changes
- Code formatting and spelling
- Update memory Command configuration values
</div>
:::
::: {.collapse}
<input type="checkbox" id="collapse-section1" aria-hidden="true">
<label for="collapse-section1" aria-hidden="true">__V1.0.0 / 27-March-2020__</label>
<div>
## Main Changes
- First Official Release of APS256XX 16-bits SPI Component drivers in line with STM32Cube BSP drivers development guidelines (UM2298)
- The component drivers are composed of
- component core drivers files: aps256xx.h/.c
- component configuration file: aps256xx_conf_template.h
</div>
:::
:::
:::
<footer class="sticky">
For complete documentation on <mark>STM32 Microcontrollers</mark> ,
visit: [[www.st.com](http://www.st.com/STM32)]{style="font-color: blue;"}
</footer>
Drivers/STM32H7RSxx_BSP/Components/aps256xx/_htmresc/Add button.svg
+2
View File
@@ -0,0 +1,2 @@
<?xml version="1.0" encoding="UTF-8"?>
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 200 200"><g fill="#13254a"><path d="M100 .212C44.868.212 0 44.889 0 99.788c0 55.132 44.868 100 100 100s100-44.868 100-100C200 44.889 155.132.212 100 .212zm0 181.164c-44.974 0-81.587-36.614-81.587-81.587 0-44.762 36.614-81.164 81.587-81.164 44.995 0 81.587 36.402 81.587 81.164 0 44.973-36.592 81.587-81.587 81.587z" style="fill: #e6007e;"/><path d="M141.1 88.127h-29.439V58.688c0-6.392-5.185-11.598-11.598-11.598-6.413 0-11.619 5.206-11.619 11.598v29.439H58.476c-6.392 0-11.598 5.185-11.598 11.598 0 6.413 5.206 11.619 11.598 11.619h29.968v29.968c0 6.392 5.206 11.598 11.619 11.598 6.413 0 11.598-5.206 11.598-11.598v-29.968H141.1c6.392 0 11.598-5.206 11.598-11.619 0-6.413-5.206-11.598-11.598-11.598z" style="fill: #e6007e;"/></g></svg>
Side by Side

After

Width:  |  Height:  |  Size: 832 B

Drivers/STM32H7RSxx_BSP/Components/aps256xx/_htmresc/Update.svg
+2
View File
@@ -0,0 +1,2 @@
<?xml version="1.0" encoding="UTF-8"?>
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 200 200"><g fill="#03234b"><path d="M170.934 64.569l-.04-.055-29.049 40.038-.057.079h14.867a59.366 59.366 0 0 1-1.488 15.615c-1.158 5.318-3.807 13.448-9.848 21.977-2.766 4.118-6.375 7.726-9.208 10.408-3.426 2.857-7.461 6.095-12 8.376-8.121 4.568-17.881 7.138-28.225 7.432-10.907.248-20.201-2.61-26.072-5.052-8.283-3.479-14.111-7.807-16.85-10.078-1.254-.956-2.25-1.907-3.057-2.676a28.662 28.662 0 0 0-1.157-1.069 158.874 158.874 0 0 0-1.479-1.362l-4.435-3.956 3.569 4.81.183.243c.2.263.548.722 1.048 1.389.276.334.579.747.93 1.226l.008.01c.689.939 1.546 2.107 2.664 3.322 3 3.536 8.178 8.801 15.808 13.801 5.969 3.866 15.672 8.901 28.001 10.935a79.05 79.05 0 0 0 12.485.998c7.97 0 15.651-1.228 22.828-3.649 6.366-1.877 12.192-4.981 17.053-7.771 6.16-3.936 10.817-7.586 14.654-11.488 8.084-7.899 14.884-17.913 19.15-28.199 3.259-7.594 5.456-15.727 6.529-24.175l.055-.425.083-.641H200l-29.066-40.063zM58.159 99.232l-12.655.563c-.097-.881-.159-1.986-.227-3.474a59.184 59.184 0 0 1 1.446-16.56c1.157-5.316 3.804-13.444 9.848-21.977 2.168-3.228 5.009-6.44 9.208-10.415 3.41-2.849 7.432-6.08 12.005-8.375 8.114-4.568 17.87-7.138 28.213-7.432 10.9-.25 20.196 2.607 26.072 5.045 8.258 3.473 14.105 7.812 16.857 10.091 1.257.951 2.253 1.904 3.057 2.673l.017.016c.43.411.801.766 1.136 1.051.475.438.841.777 1.091 1.01l.138.128.248.229 4.04 3.613-3.165-4.456c-.058-.083-.312-.417-.73-.971l-.507-.67a28.922 28.922 0 0 1-.901-1.192l-.02-.027c-.69-.945-1.548-2.121-2.677-3.346-3.002-3.537-8.182-8.803-15.813-13.801-5.964-3.865-15.662-8.9-27.997-10.935-8.484-1.363-21.496-2.009-35.313 2.651-6.355 1.88-12.186 4.983-17.054 7.772-6.163 3.944-10.82 7.595-14.654 11.488-8.079 7.894-14.882 17.909-19.155 28.2-3.268 7.624-5.463 15.757-6.523 24.173-.436 3.281-.642 5.421-.664 6.926L0 101.831l30.683 38.727.042.053 27.38-41.298.054-.081z" style="fill: #e6007e;"/></g></svg>
Side by Side

After

Width:  |  Height:  |  Size: 1.9 KiB

Drivers/STM32H7RSxx_BSP/Components/aps256xx/_htmresc/favicon.png
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 4.0 KiB

Drivers/STM32H7RSxx_BSP/Components/aps256xx/_htmresc/mini-st.css
+1711
View File
File diff suppressed because it is too large. Load diff
Drivers/STM32H7RSxx_BSP/Components/aps256xx/_htmresc/mini-st_2020.css
+1711
View File
File diff suppressed because it is too large. Load diff
Drivers/STM32H7RSxx_BSP/Components/aps256xx/_htmresc/st_logo.png
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 18 KiB

Drivers/STM32H7RSxx_BSP/Components/aps256xx/_htmresc/st_logo_2020.png
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 7.3 KiB

Drivers/STM32H7RSxx_BSP/Components/aps256xx/aps256xx.c
+536
View File
@@ -0,0 +1,536 @@
/**
******************************************************************************
* @file aps256xx.c
* @modify MCD Application Team
* @brief This file provides the APS256XX HSPI drivers.
******************************************************************************
* @attention
*
* Copyright (c) 2021 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "aps256xx.h"
/** @addtogroup BSP
* @{
*/
/** @addtogroup Components
* @{
*/
/** @defgroup APS256XX APS256XX
* @{
*/
/** @defgroup APS256XX_Exported_Functions APS256XX Exported Functions
* @{
*/
/* Read/Write Array Commands *********************/
/**
* @brief Reads an amount of data from the memory.
* @param Ctx Component object pointer
* @param pData Pointer to data to be read
* @param ReadAddr Read start address
* @param Size Size of data to read
* @param LatencyCode Latency used for the access
* @param IOMode I/O Mode used for the access
* @param BurstType Type of burst used for the access
* @retval Memory status
*/
int32_t APS256XX_Read(XSPI_HandleTypeDef *Ctx, uint8_t *pData, uint32_t ReadAddr, uint32_t Size, uint32_t LatencyCode,
uint32_t IOMode, uint32_t BurstType)
{
XSPI_RegularCmdTypeDef sCommand = {0};
/* Initialize the read command */
sCommand.OperationType = HAL_XSPI_OPTYPE_COMMON_CFG;
sCommand.InstructionMode = HAL_XSPI_INSTRUCTION_8_LINES;
sCommand.InstructionWidth = HAL_XSPI_INSTRUCTION_8_BITS;
sCommand.InstructionDTRMode = HAL_XSPI_INSTRUCTION_DTR_DISABLE;
sCommand.Instruction = ((BurstType == 0U) ? APS256XX_READ_LINEAR_BURST_CMD : APS256XX_READ_CMD);
sCommand.AddressMode = HAL_XSPI_ADDRESS_8_LINES;
sCommand.AddressWidth = HAL_XSPI_ADDRESS_32_BITS;
sCommand.AddressDTRMode = HAL_XSPI_ADDRESS_DTR_ENABLE;
sCommand.Address = ReadAddr;
sCommand.AlternateBytesMode = HAL_XSPI_ALT_BYTES_NONE;
sCommand.DataMode = ((IOMode == 0U) ? HAL_XSPI_DATA_8_LINES : HAL_XSPI_DATA_16_LINES);
sCommand.DataDTRMode = HAL_XSPI_DATA_DTR_ENABLE;
sCommand.DataLength = Size;
sCommand.DummyCycles = (LatencyCode - 1U);
sCommand.DQSMode = HAL_XSPI_DQS_ENABLE;
#if defined (XSPI_CCR_SIOO)
sCommand.SIOOMode = HAL_XSPI_SIOO_INST_EVERY_CMD;
#endif
/* Configure the command */
if (HAL_XSPI_Command(Ctx, &sCommand, HAL_XSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return APS256XX_ERROR;
}
/* Reception of the data */
if (HAL_XSPI_Receive(Ctx, pData, HAL_XSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return APS256XX_ERROR;
}
return APS256XX_OK;
}
/**
* @brief Reads an amount of data in DMA mode from the memory.
* @param Ctx Component object pointer
* @param pData Pointer to data to be read
* @param ReadAddr Read start address
* @param Size Size of data to read
* @param LatencyCode Latency used for the access
* @param IOMode I/O Mode used for the access
* @param BurstType Type of burst used for the access
* @retval Memory status
*/
int32_t APS256XX_Read_DMA(XSPI_HandleTypeDef *Ctx, uint8_t *pData, uint32_t ReadAddr, uint32_t Size,
uint32_t LatencyCode, uint32_t IOMode, uint32_t BurstType)
{
XSPI_RegularCmdTypeDef sCommand = {0};
/* Initialize the read command */
sCommand.OperationType = HAL_XSPI_OPTYPE_COMMON_CFG;
sCommand.InstructionMode = HAL_XSPI_INSTRUCTION_8_LINES;
sCommand.InstructionWidth = HAL_XSPI_INSTRUCTION_8_BITS;
sCommand.InstructionDTRMode = HAL_XSPI_INSTRUCTION_DTR_DISABLE;
sCommand.Instruction = ((BurstType == 0U) ? APS256XX_READ_LINEAR_BURST_CMD : APS256XX_READ_CMD);
sCommand.AddressMode = HAL_XSPI_ADDRESS_8_LINES;
sCommand.AddressWidth = HAL_XSPI_ADDRESS_32_BITS;
sCommand.AddressDTRMode = HAL_XSPI_ADDRESS_DTR_ENABLE;
sCommand.Address = ReadAddr;
sCommand.AlternateBytesMode = HAL_XSPI_ALT_BYTES_NONE;
sCommand.DataMode = ((IOMode == 0U) ? HAL_XSPI_DATA_8_LINES : HAL_XSPI_DATA_16_LINES);
sCommand.DataDTRMode = HAL_XSPI_DATA_DTR_ENABLE;
sCommand.DataLength = Size;
sCommand.DummyCycles = (LatencyCode - 1U);
sCommand.DQSMode = HAL_XSPI_DQS_ENABLE;
#if defined (XSPI_CCR_SIOO)
sCommand.SIOOMode = HAL_XSPI_SIOO_INST_EVERY_CMD;
#endif
/* Configure the command */
if (HAL_XSPI_Command(Ctx, &sCommand, HAL_XSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return APS256XX_ERROR;
}
/* Reception of the data */
if (HAL_XSPI_Receive_DMA(Ctx, pData) != HAL_OK)
{
return APS256XX_ERROR;
}
return APS256XX_OK;
}
/**
* @brief Writes an amount of data to the memory.
* @param Ctx Component object pointer
* @param pData Pointer to data to be written
* @param WriteAddr Write start address
* @param Size Size of data to write
* @param LatencyCode Latency used for the access
* @param IOMode I/O Mode used for the access
* @param BurstType Type of burst used for the access
* @retval Memory status
*/
int32_t APS256XX_Write(XSPI_HandleTypeDef *Ctx, uint8_t *pData, uint32_t WriteAddr, uint32_t Size, uint32_t LatencyCode,
uint32_t IOMode, uint32_t BurstType)
{
XSPI_RegularCmdTypeDef sCommand = {0};
/* Initialize the write command */
sCommand.OperationType = HAL_XSPI_OPTYPE_COMMON_CFG;
sCommand.InstructionMode = HAL_XSPI_INSTRUCTION_8_LINES;
sCommand.InstructionWidth = HAL_XSPI_INSTRUCTION_8_BITS;
sCommand.InstructionDTRMode = HAL_XSPI_INSTRUCTION_DTR_DISABLE;
sCommand.Instruction = ((BurstType == 0U) ? APS256XX_WRITE_LINEAR_BURST_CMD : APS256XX_WRITE_CMD);
sCommand.AddressMode = HAL_XSPI_ADDRESS_8_LINES;
sCommand.AddressWidth = HAL_XSPI_ADDRESS_32_BITS;
sCommand.AddressDTRMode = HAL_XSPI_ADDRESS_DTR_ENABLE;
sCommand.Address = WriteAddr;
sCommand.AlternateBytesMode = HAL_XSPI_ALT_BYTES_NONE;
sCommand.DataMode = ((IOMode == 0U) ? HAL_XSPI_DATA_8_LINES : HAL_XSPI_DATA_16_LINES);
sCommand.DataDTRMode = HAL_XSPI_DATA_DTR_ENABLE;
sCommand.DataLength = Size;
sCommand.DummyCycles = (LatencyCode - 1U);
sCommand.DQSMode = HAL_XSPI_DQS_ENABLE;
#if defined (XSPI_CCR_SIOO)
sCommand.SIOOMode = HAL_XSPI_SIOO_INST_EVERY_CMD;
#endif
/* Configure the command */
if (HAL_XSPI_Command(Ctx, &sCommand, HAL_XSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return APS256XX_ERROR;
}
/* Transmission of the data */
if (HAL_XSPI_Transmit(Ctx, pData, HAL_XSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return APS256XX_ERROR;
}
return APS256XX_OK;
}
/**
* @brief Writes an amount of data in DMA mode to the memory.
* @param Ctx Component object pointer
* @param pData Pointer to data to be written
* @param WriteAddr Write start address
* @param Size Size of data to write
* @param LatencyCode Latency used for the access
* @param IOMode I/O Mode used for the access
* @param BurstType Type of burst used for the access
* @retval Memory status
*/
int32_t APS256XX_Write_DMA(XSPI_HandleTypeDef *Ctx, uint8_t *pData, uint32_t WriteAddr, uint32_t Size,
uint32_t LatencyCode, uint32_t IOMode, uint32_t BurstType)
{
XSPI_RegularCmdTypeDef sCommand = {0};
/* Initialize the write command */
sCommand.OperationType = HAL_XSPI_OPTYPE_COMMON_CFG;
sCommand.InstructionMode = HAL_XSPI_INSTRUCTION_8_LINES;
sCommand.InstructionWidth = HAL_XSPI_INSTRUCTION_8_BITS;
sCommand.InstructionDTRMode = HAL_XSPI_INSTRUCTION_DTR_DISABLE;
sCommand.Instruction = ((BurstType == 0U) ? APS256XX_WRITE_LINEAR_BURST_CMD : APS256XX_WRITE_CMD);
sCommand.AddressMode = HAL_XSPI_ADDRESS_8_LINES;
sCommand.AddressWidth = HAL_XSPI_ADDRESS_32_BITS;
sCommand.AddressDTRMode = HAL_XSPI_ADDRESS_DTR_ENABLE;
sCommand.Address = WriteAddr;
sCommand.AlternateBytesMode = HAL_XSPI_ALT_BYTES_NONE;
sCommand.DataMode = ((IOMode == 0U) ? HAL_XSPI_DATA_8_LINES : HAL_XSPI_DATA_16_LINES);
sCommand.DataDTRMode = HAL_XSPI_DATA_DTR_ENABLE;
sCommand.DataLength = Size;
sCommand.DummyCycles = (LatencyCode - 1U);
sCommand.DQSMode = HAL_XSPI_DQS_ENABLE;
#if defined (XSPI_CCR_SIOO)
sCommand.SIOOMode = HAL_XSPI_SIOO_INST_EVERY_CMD;
#endif
/* Configure the command */
if (HAL_XSPI_Command(Ctx, &sCommand, HAL_XSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return APS256XX_ERROR;
}
/* Transmission of the data */
if (HAL_XSPI_Transmit_DMA(Ctx, pData) != HAL_OK)
{
return APS256XX_ERROR;
}
return APS256XX_OK;
}
/**
* @brief Enable memory mapped mode for the memory.
* @param Ctx Component object pointer
* @param ReadLatencyCode Latency used for the read access
* @param WriteLatencyCode Latency used for the write access
* @param IOMode I/O Mode used for the access
* @param BurstType Type of burst used for the access
* @retval Memory status
*/
int32_t APS256XX_EnableMemoryMappedMode(XSPI_HandleTypeDef *Ctx, uint32_t ReadLatencyCode, uint32_t WriteLatencyCode,
uint32_t IOMode, uint32_t BurstType)
{
XSPI_RegularCmdTypeDef sCommand = {0};
XSPI_MemoryMappedTypeDef sMemMappedCfg = {0};
/* Initialize the write command */
sCommand.OperationType = HAL_XSPI_OPTYPE_WRITE_CFG;
sCommand.InstructionMode = HAL_XSPI_INSTRUCTION_8_LINES;
sCommand.InstructionWidth = HAL_XSPI_INSTRUCTION_8_BITS;
sCommand.InstructionDTRMode = HAL_XSPI_INSTRUCTION_DTR_DISABLE;
sCommand.Instruction = ((BurstType == 0U) ? APS256XX_WRITE_LINEAR_BURST_CMD : APS256XX_WRITE_CMD);
sCommand.AddressMode = HAL_XSPI_ADDRESS_8_LINES;
sCommand.AddressWidth = HAL_XSPI_ADDRESS_32_BITS;
sCommand.AddressDTRMode = HAL_XSPI_ADDRESS_DTR_ENABLE;
sCommand.AlternateBytesMode = HAL_XSPI_ALT_BYTES_NONE;
sCommand.DataMode = ((IOMode == 0U) ? HAL_XSPI_DATA_8_LINES : HAL_XSPI_DATA_16_LINES);
sCommand.DataDTRMode = HAL_XSPI_DATA_DTR_ENABLE;
sCommand.DummyCycles = (WriteLatencyCode - 1U);
sCommand.DQSMode = HAL_XSPI_DQS_ENABLE;
#if defined (XSPI_CCR_SIOO)
sCommand.SIOOMode = HAL_XSPI_SIOO_INST_EVERY_CMD;
#endif
if (HAL_XSPI_Command(Ctx, &sCommand, HAL_XSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return APS256XX_ERROR;
}
/* Initialize the read command */
sCommand.OperationType = HAL_XSPI_OPTYPE_READ_CFG;
sCommand.Instruction = ((BurstType == 0U) ? APS256XX_READ_LINEAR_BURST_CMD : APS256XX_READ_CMD);
sCommand.DummyCycles = (ReadLatencyCode - 1U);
if (HAL_XSPI_Command(Ctx, &sCommand, HAL_XSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return APS256XX_ERROR;
}
/* Activation of memory-mapped mode */
sMemMappedCfg.TimeOutActivation = HAL_XSPI_TIMEOUT_COUNTER_DISABLE;
if (HAL_XSPI_MemoryMapped(Ctx, &sMemMappedCfg) != HAL_OK)
{
return APS256XX_ERROR;
}
return APS256XX_OK;
}
/* Register/Setting Commands **************************************************/
/**
* @brief Read mode register value
* @param Ctx Component object pointer
* @param Address Register address
* @param Value Register value pointer
* @param LatencyCode Latency used for the access
* @retval error status
*/
int32_t APS256XX_ReadReg(XSPI_HandleTypeDef *Ctx, uint32_t Address, uint8_t *Value, uint32_t LatencyCode)
{
XSPI_RegularCmdTypeDef sCommand = {0};
/* Initialize the read register command */
sCommand.OperationType = HAL_XSPI_OPTYPE_COMMON_CFG;
sCommand.InstructionMode = HAL_XSPI_INSTRUCTION_8_LINES;
sCommand.InstructionWidth = HAL_XSPI_INSTRUCTION_8_BITS;
sCommand.InstructionDTRMode = HAL_XSPI_INSTRUCTION_DTR_DISABLE;
sCommand.Instruction = APS256XX_READ_REG_CMD;
sCommand.AddressMode = HAL_XSPI_ADDRESS_8_LINES;
sCommand.AddressWidth = HAL_XSPI_ADDRESS_32_BITS;
sCommand.AddressDTRMode = HAL_XSPI_ADDRESS_DTR_ENABLE;
sCommand.Address = Address;
sCommand.AlternateBytesMode = HAL_XSPI_ALT_BYTES_NONE;
sCommand.DataMode = HAL_XSPI_DATA_8_LINES;
sCommand.DataDTRMode = HAL_XSPI_DATA_DTR_ENABLE;
sCommand.DataLength = 2;
sCommand.DummyCycles = (LatencyCode - 1U);
sCommand.DQSMode = HAL_XSPI_DQS_ENABLE;
#if defined (XSPI_CCR_SIOO)
sCommand.SIOOMode = HAL_XSPI_SIOO_INST_EVERY_CMD;
#endif
/* Configure the command */
if (HAL_XSPI_Command(Ctx, &sCommand, HAL_XSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return APS256XX_ERROR;
}
/* Reception of the data */
if (HAL_XSPI_Receive(Ctx, (uint8_t *)Value, HAL_XSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return APS256XX_ERROR;
}
return APS256XX_OK;
}
/**
* @brief Write mode register
* @param Ctx Component object pointer
* @param Address Register address
* @param Value Value to write to register
* @retval error status
*/
int32_t APS256XX_WriteReg(XSPI_HandleTypeDef *Ctx, uint32_t Address, uint8_t Value)
{
XSPI_RegularCmdTypeDef sCommand = {0};
/* Initialize the write register command */
sCommand.OperationType = HAL_XSPI_OPTYPE_COMMON_CFG;
sCommand.InstructionMode = HAL_XSPI_INSTRUCTION_8_LINES;
sCommand.InstructionWidth = HAL_XSPI_INSTRUCTION_8_BITS;
sCommand.InstructionDTRMode = HAL_XSPI_INSTRUCTION_DTR_DISABLE;
sCommand.Instruction = APS256XX_WRITE_REG_CMD;
sCommand.AddressMode = HAL_XSPI_ADDRESS_8_LINES;
sCommand.AddressWidth = HAL_XSPI_ADDRESS_32_BITS;
sCommand.AddressDTRMode = HAL_XSPI_ADDRESS_DTR_ENABLE;
sCommand.Address = Address;
sCommand.AlternateBytesMode = HAL_XSPI_ALT_BYTES_NONE;
sCommand.DataMode = HAL_XSPI_DATA_8_LINES;
sCommand.DataDTRMode = HAL_XSPI_DATA_DTR_ENABLE;
sCommand.DataLength = 2;
sCommand.DummyCycles = 0;
sCommand.DQSMode = HAL_XSPI_DQS_DISABLE;
#if defined (XSPI_CCR_SIOO)
sCommand.SIOOMode = HAL_XSPI_SIOO_INST_EVERY_CMD;
#endif
/* Configure the command */
if (HAL_XSPI_Command(Ctx, &sCommand, HAL_XSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return APS256XX_ERROR;
}
/* Transmission of the data */
if (HAL_XSPI_Transmit(Ctx, (uint8_t *)(&Value), HAL_XSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return APS256XX_ERROR;
}
return APS256XX_OK;
}
/* ID Commands ****************************************************************/
/**
* @brief Read Flash IDs.
* Vendor ID, Device ID, Device Density
* @param Ctx Component object pointer
* @param ID IDs pointer (2 * 8-bits value)
* @param LatencyCode Latency used for the access
* @retval error status
*/
int32_t APS256XX_ReadID(XSPI_HandleTypeDef *Ctx, uint8_t *ID, uint32_t LatencyCode)
{
/* Read the Mode Register 1 and 2 */
if (APS256XX_ReadReg(Ctx, APS256XX_MR1_ADDRESS, ID, LatencyCode) != APS256XX_OK)
{
return APS256XX_ERROR;
}
/* Keep only Vendor ID from Mode Register 1 */
*ID &= (APS256XX_MR1_VENDOR_ID);
/* Keep only Device ID and Device Density from Mode Register 2 */
*(ID + 1) &= (APS256XX_MR2_DEVICE_ID | APS256XX_MR2_DENSITY);
return APS256XX_OK;
}
/* Power down Commands ********************************************************/
/**
* @brief Memory enter deep power-down command
* @param Ctx Component object pointer
* @retval error status
*/
int32_t APS256XX_EnterPowerDown(XSPI_HandleTypeDef *Ctx)
{
/* Update the deep power down value of the MR6 register */
if (APS256XX_WriteReg(Ctx, APS256XX_MR6_ADDRESS, APS256XX_MR6_HS_HALF_SPEED_MODE) != APS256XX_OK)
{
return APS256XX_ERROR;
}
/* --- Memory enter deep power down as soon nCS goes high --- */
/* --- At least 500us should be respected before leaving deep power down --- */
return APS256XX_OK;
}
/**
* @brief Flash leave deep power-down command
* @param Ctx Component object pointer
* @param LatencyCode Latency used for the access
* @retval error status
*/
int32_t APS256XX_LeavePowerDown(XSPI_HandleTypeDef *Ctx)
{
/* --- A dummy command is sent to the memory, as the nCS should be low for at least 60 ns --- */
/* --- Memory takes 150us max to leave deep power down --- */
XSPI_RegularCmdTypeDef sCommand = {0};
/* Initialize the command */
sCommand.OperationType = HAL_XSPI_OPTYPE_COMMON_CFG;
sCommand.InstructionMode = HAL_XSPI_INSTRUCTION_8_LINES;
sCommand.InstructionWidth = HAL_XSPI_INSTRUCTION_8_BITS;
sCommand.InstructionDTRMode = HAL_XSPI_INSTRUCTION_DTR_DISABLE;
sCommand.Instruction = APS256XX_READ_CMD;
sCommand.AddressMode = HAL_XSPI_ADDRESS_8_LINES;
sCommand.AddressWidth = HAL_XSPI_ADDRESS_32_BITS;
sCommand.AddressDTRMode = HAL_XSPI_ADDRESS_DTR_DISABLE;
sCommand.Address = 0;
sCommand.AlternateBytesMode = HAL_XSPI_ALT_BYTES_NONE;
sCommand.DataMode = HAL_XSPI_DATA_NONE;
sCommand.DataLength = 0;
sCommand.DummyCycles = 0;
sCommand.DQSMode = HAL_XSPI_DQS_DISABLE;
#if defined (XSPI_CCR_SIOO)
sCommand.SIOOMode = HAL_XSPI_SIOO_INST_EVERY_CMD;
#endif
/* Configure the command */
if (HAL_XSPI_Command(Ctx, &sCommand, HAL_XSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return APS256XX_ERROR;
}
return APS256XX_OK;
}
/* Reset Command **************************************************************/
/**
* @brief Reset the memory
* @param Ctx Component object pointer
* @retval error status
*/
int32_t APS256XX_Reset(XSPI_HandleTypeDef *Ctx)
{
XSPI_RegularCmdTypeDef sCommand = {0};
/* Initialize the command */
sCommand.OperationType = HAL_XSPI_OPTYPE_COMMON_CFG;
sCommand.InstructionMode = HAL_XSPI_INSTRUCTION_8_LINES;
sCommand.InstructionWidth = HAL_XSPI_INSTRUCTION_8_BITS;
sCommand.InstructionDTRMode = HAL_XSPI_INSTRUCTION_DTR_DISABLE;
sCommand.Instruction = APS256XX_RESET_CMD;
sCommand.AddressMode = HAL_XSPI_ADDRESS_8_LINES;
sCommand.AddressWidth = HAL_XSPI_ADDRESS_24_BITS;
sCommand.AddressDTRMode = HAL_XSPI_ADDRESS_DTR_DISABLE;
sCommand.Address = 0;
sCommand.AlternateBytesMode = HAL_XSPI_ALT_BYTES_NONE;
sCommand.DataMode = HAL_XSPI_DATA_NONE;
sCommand.DataLength = 0;
sCommand.DummyCycles = 0;
sCommand.DQSMode = HAL_XSPI_DQS_DISABLE;
#if defined (XSPI_CCR_SIOO)
sCommand.SIOOMode = HAL_XSPI_SIOO_INST_EVERY_CMD;
#endif
/* Configure the command */
if (HAL_XSPI_Command(Ctx, &sCommand, HAL_XSPI_TIMEOUT_DEFAULT_VALUE) != HAL_OK)
{
return APS256XX_ERROR;
}
/* Need to wait tRST */
HAL_Delay(1);
return 0/*APS256XX_OK*/;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
Drivers/STM32H7RSxx_BSP/Components/aps256xx/aps256xx.h
+287
View File
@@ -0,0 +1,287 @@
/**
******************************************************************************
* @file aps256xx.h
* @author MCD Application Team
* @brief This file contains all the description of the APS256XX 16bits-HSPI PSRAM memory.
******************************************************************************
* @attention
*
* Copyright (c) 2021 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef APS256XX_H
#define APS256XX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "aps256xx_conf.h"
/** @addtogroup BSP
* @{
*/
/** @addtogroup Components
* @{
*/
/** @addtogroup APS256XX
* @{
*/
/** @defgroup APS256XX_Exported_Types
* @{
*/
/**
* @}
*/
/** @defgroup APS256XX_Exported_Constants
* @{
*/
/**
* @brief APS256XX Configuration
*/
#define APS256XX_RAM_SIZE 0x2000000U /* 256 MBits => 32 MBytes */
/**
* @brief APS256XX Error codes
*/
#define APS256XX_OK (0)
#define APS256XX_ERROR (-1)
/******************************************************************************
* @brief APS256XX Registers
****************************************************************************/
/* Mode Register 0 */
#define APS256XX_MR0_ADDRESS 0x00000000U
#define APS256XX_MR0_DRIVE_STRENGTH 0x03U /*!< Drive Strength */
#define APS256XX_MR0_DS_FULL 0x00U /*!< Drive Strength : Full (25 Ohm) */
#define APS256XX_MR0_DS_HALF 0x01U /*!< Drive Strength : Half (50 Ohm) */
#define APS256XX_MR0_DS_QUART 0x02U /*!< Drive Strength : 1/4 (100 Ohm) */
#define APS256XX_MR0_DS_EIGHT 0x03U /*!< Drive Strength : 1/8 (200 Ohm) */
#define APS256XX_MR0_READ_LATENCY_CODE 0x1CU /*!< Read Latency Code */
#define APS256XX_MR0_RLC_3 0x00U /*!< Read Latency Code : 3 */
#define APS256XX_MR0_RLC_4 0x04U /*!< Read Latency Code : 4 */
#define APS256XX_MR0_RLC_5 0x08U /*!< Read Latency Code : 5 */
#define APS256XX_MR0_RLC_6 0x0CU /*!< Read Latency Code : 6 */
#define APS256XX_MR0_RLC_7 0x10U /*!< Read Latency Code : 7 */
#define APS256XX_MR0_LATENCY_TYPE 0x20U /*!< Latency Type */
/* Mode Register 1 */
#define APS256XX_MR1_ADDRESS 0x00000001U
#define APS256XX_MR1_VENDOR_ID 0x1FU /*!< Vendor Identifier */
#define APS256XX_MR1_VENDOR_ID_APM 0x0DU /*!< Vendor Identifier : APM */
#define APS256XX_MR1_ULP 0x80U /*!< Ultra Low Power Device */
/* Mode Register 2 */
#define APS256XX_MR2_ADDRESS 0x00000002U
#define APS256XX_MR2_DENSITY 0x07U /*!< Device Density */
#define APS256XX_MR2_DENSITY_128_MB 0x05U /*!< Device Density : 128 Mb */
#define APS256XX_MR2_DENSITY_256_MB 0x07U /*!< Device Density : 256 Mb */
#define APS256XX_MR2_DENSITY_512_MB 0x06U /*!< Device Density : 512 Mb */
#define APS256XX_MR2_DEVICE_ID 0x18U /*!< Device Identifier */
#define APS256XX_MR2_DEVID_GEN_1 0x00U /*!< Device Identifier : Generation 1 */
#define APS256XX_MR2_DEVID_GEN_2 0x08U /*!< Device Identifier : Generation 2 */
#define APS256XX_MR2_DEVID_GEN_3 0x10U /*!< Device Identifier : Generation 3 */
#define APS256XX_MR2_DEVID_GEN_4 0x18U /*!< Device Identifier : Generation 4 */
#define APS256XX_MR2_KGD 0xE0U /*!< Good-Die Identifier */
#define APS256XX_MR2_KGD_GOOD_DIE_ID 0xC0U /*!< Good-Die Identifier : PASS */
/* Mode Register 3 */
#define APS256XX_MR3_ADDRESS 0x00000003U
#define APS256XX_MR3_SRF 0x30U /*!< Self Refresh Flag */
#define APS256XX_MR3_SRF_0_5X 0x10U /*!< Self Refresh Flag : 0.5x Refresh */
#define APS256XX_MR3_SRF_1X 0x00U /*!< Self Refresh Flag : 1x Refresh */
#define APS256XX_MR3_SRF_4X 0x20U /*!< Self Refresh Flag : 4x Refresh */
#define APS256XX_MR3_RBXEN 0x80U /*!< Row Boundary Crossing Enable */
/* Mode Register 4 */
#define APS256XX_MR4_ADDRESS 0x00000004U
#define APS256XX_MR4_PASR 0x07U /*!< Partially Address Space Refresh */
#define APS256XX_MR4_PASR_FULL 0x00U /*!< PASR : Full Array */
#define APS256XX_MR4_PASR_BOTTOM_HALF 0x01U /*!< PASR : Bottom 1/2 Array */
#define APS256XX_MR4_PASR_BOTTOM_QUART 0x02U /*!< PASR : Bottom 1/4 Array */
#define APS256XX_MR4_PASR_BOTTOM_EIGHT 0x03U /*!< PASR : Bottom 1/8 Array */
#define APS256XX_MR4_PASR_NONE 0x04U /*!< PASR : None */
#define APS256XX_MR4_PASR_TOP_HALF 0x05U /*!< PASR : Top 1/2 Array */
#define APS256XX_MR4_PASR_TOP_QUART 0x06U /*!< PASR : Top 1/4 Array */
#define APS256XX_MR4_PASR_TOP_EIGHT 0x07U /*!< PASR : Top 1/8 Array */
#define APS256XX_MR4_RF_RATE 0x18U /*!< Refresh Frequency Setting */
#define APS256XX_MR4_RF_4X 0x00U /*!< RF : Always 4x Refresh */
#define APS256XX_MR4_RF_1X 0x08U /*!< RF : Enables 1x Refresh */
#define APS256XX_MR4_RF_0_5X 0x18U /*!< RF : Enables 0.5x Refresh */
#define APS256XX_MR4_WRITE_LATENCY_CODE 0xE0U /*!< Write Latency Code */
#define APS256XX_MR4_WLC_3 0x00U /*!< Write Latency Code : 3 */
#define APS256XX_MR4_WLC_4 0x80U /*!< Write Latency Code : 4 */
#define APS256XX_MR4_WLC_5 0x40U /*!< Write Latency Code : 5 */
#define APS256XX_MR4_WLC_6 0xC0U /*!< Write Latency Code : 6 */
#define APS256XX_MR4_WLC_7 0x20U /*!< Write Latency Code : 7 */
/* Mode Register 6 */
#define APS256XX_MR6_ADDRESS 0x00000006U
#define APS256XX_MR6_HALF_SLEEP 0xF0U /*!< Half Sleep */
#define APS256XX_MR6_HS_HALF_SPEED_MODE 0xF0U /*!< Half Sleep : Half Speed Mode */
#define APS256XX_MR6_HS_DEEP_POWER_DOWN 0xC0U /*!< Half Sleep : Deep Power Down Mode */
/* Mode Register 8 */
#define APS256XX_MR8_ADDRESS 0x00000008U
#define APS256XX_MR8_BL 0x03U /*!< Burst Length */
#define APS256XX_MR8_BL_16_BYTES 0x00U /*!< Burst Length : 16 Byte/Word Wrap */
#define APS256XX_MR8_BL_32_BYTES 0x01U /*!< Burst Length : 32 Byte/Word Wrap */
#define APS256XX_MR8_BL_64_BYTES 0x02U /*!< Burst Length : 64 Byte/Word Wrap */
#define APS256XX_MR8_BL_2K_BYTES 0x03U /*!< Burst Length : 2K Byte/1K Word Wrap */
#define APS256XX_MR8_BT 0x04U /*!< Burst Type */
#define APS256XX_MR8_RBX 0x08U /*!< Row Boundary Crossing Read Enable */
#define APS256XX_MR8_X8_X16 0x40U /*!< IO X8/X16 Mode */
/******************************************************************************
* @brief APS256XX Commands
****************************************************************************/
/* Read Operations */
#define APS256XX_READ_CMD 0x00U /*!< Synchronous Read */
#define APS256XX_READ_LINEAR_BURST_CMD 0x20U /*!< Linear Burst Read */
/* Write Operations */
#define APS256XX_WRITE_CMD 0x80U /*!< Synchronous Write */
#define APS256XX_WRITE_LINEAR_BURST_CMD 0xA0U /*!< Linear Burst Write */
/* Reset Operations */
#define APS256XX_RESET_CMD 0xFFU /*!< Global Reset */
/* Register Operations */
#define APS256XX_READ_REG_CMD 0x40U /*!< Mode Register Read */
#define APS256XX_WRITE_REG_CMD 0xC0U /*!< Mode Register Write */
/**
* @}
*/
/** @defgroup APS256XX_Exported_Types APS256XX Exported Types
* @{
*/
typedef enum
{
APS256XX_BURST_16_BYTES = APS256XX_MR8_BL_16_BYTES,
APS256XX_BURST_32_BYTES = APS256XX_MR8_BL_32_BYTES,
APS256XX_BURST_64_BYTES = APS256XX_MR8_BL_64_BYTES,
APS256XX_BURST_2_KBYTES = APS256XX_MR8_BL_2K_BYTES
} APS256XX_BurstLength_t;
typedef enum
{
APS256XX_READ_LATENCY_3 = APS256XX_MR0_RLC_3,
APS256XX_READ_LATENCY_4 = APS256XX_MR0_RLC_4,
APS256XX_READ_LATENCY_5 = APS256XX_MR0_RLC_5,
APS256XX_READ_LATENCY_6 = APS256XX_MR0_RLC_6,
APS256XX_READ_LATENCY_7 = APS256XX_MR0_RLC_7
} APS256XX_ReadLatencyCode_t;
typedef enum
{
APS256XX_WRITE_LATENCY_3 = APS256XX_MR4_WLC_3,
APS256XX_WRITE_LATENCY_4 = APS256XX_MR4_WLC_4,
APS256XX_WRITE_LATENCY_5 = APS256XX_MR4_WLC_5,
APS256XX_WRITE_LATENCY_6 = APS256XX_MR4_WLC_6,
APS256XX_WRITE_LATENCY_7 = APS256XX_MR4_WLC_7
} APS256XX_WriteLatencyCode_t;
/**
* @}
*/
/** @defgroup APS256XX_Exported_Macros APS256XX Exported Macros
* @{
*/
#define APS256XX_READ_REG_LATENCY(rlc) ((((rlc) & APS256XX_MR0_READ_LATENCY_CODE) >> 2U) + 3U)
#define APS256XX_READ_LATENCY(rlc, type) ((((type) & APS256XX_MR0_LATENCY_TYPE) == 0U) ? \
((((rlc) & APS256XX_MR0_READ_LATENCY_CODE) >> 2U) + 3U) : \
(((((rlc) & APS256XX_MR0_READ_LATENCY_CODE) >> 2U) + 3U)*2U))
#define APS256XX_WRITE_LATENCY(wlc) ((((wlc) & APS256XX_MR4_WRITE_LATENCY_CODE) == 0U) ? 3U : \
((((wlc) & APS256XX_MR4_WLC_7) != 0U) ? 7U : \
((((wlc) & APS256XX_MR4_WLC_5) == 0U) ? 4U : \
((((wlc) & APS256XX_MR4_WLC_4) == 0U) ? 5U : 6U))))
/**
* @}
*/
/** @defgroup APS256XX_Exported_Functions APS256XX Exported Functions
* @{
*/
/* Read/Write Array Commands **************************************************/
int32_t APS256XX_Read(XSPI_HandleTypeDef *Ctx, uint8_t *pData, uint32_t ReadAddr, uint32_t Size, uint32_t LatencyCode,
uint32_t IOMode, uint32_t BurstType);
int32_t APS256XX_Read_DMA(XSPI_HandleTypeDef *Ctx, uint8_t *pData, uint32_t ReadAddr, uint32_t Size,
uint32_t LatencyCode, uint32_t IOMode, uint32_t BurstType);
int32_t APS256XX_Write(XSPI_HandleTypeDef *Ctx, uint8_t *pData, uint32_t WriteAddr, uint32_t Size, uint32_t LatencyCode,
uint32_t IOMode, uint32_t BurstType);
int32_t APS256XX_Write_DMA(XSPI_HandleTypeDef *Ctx, uint8_t *pData, uint32_t WriteAddr, uint32_t Size,
uint32_t LatencyCode, uint32_t IOMode, uint32_t BurstType);
int32_t APS256XX_EnableMemoryMappedMode(XSPI_HandleTypeDef *Ctx, uint32_t ReadLatencyCode, uint32_t WriteLatencyCode,
uint32_t IOMode, uint32_t BurstType);
/* Register/Setting Commands **************************************************/
int32_t APS256XX_ReadReg(XSPI_HandleTypeDef *Ctx, uint32_t Address, uint8_t *Value, uint32_t LatencyCode);
int32_t APS256XX_WriteReg(XSPI_HandleTypeDef *Ctx, uint32_t Address, uint8_t Value);
/* ID Commands ****************************************************************/
int32_t APS256XX_ReadID(XSPI_HandleTypeDef *Ctx, uint8_t *ID, uint32_t LatencyCode);
/* Power down Commands ********************************************************/
int32_t APS256XX_EnterPowerDown(XSPI_HandleTypeDef *Ctx);
int32_t APS256XX_LeavePowerDown(XSPI_HandleTypeDef *Ctx);
/* Reset Command **************************************************************/
int32_t APS256XX_Reset(XSPI_HandleTypeDef *Ctx);
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* APS256XX_H */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
Drivers/STM32H7RSxx_BSP/Components/aps256xx/aps256xx_conf_template.h
+49
View File
@@ -0,0 +1,49 @@
/**
******************************************************************************
* @file aps256xx_conf.h
* @author MCD Application Team
* @brief APS256XX 16bits-OSPI PSRAM memory configuration template file.
* This file should be copied to the application folder and renamed
* to aps256xx_conf.h
******************************************************************************
* @attention
*
* Copyright (c) 2021 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef APS256XX_CONF_H
#define APS256XX_CONF_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32xxxx_hal.h"
/** @addtogroup BSP
* @{
*/
#define CONF_HSPI_DS APS256XX_MR0_DS_HALF
#define CONF_HSPI_PASR APS256XX_MR4_PASR_FULL
#define CONF_HSPI_RF APS256XX_MR4_RF_4X
#define DEFAULT_READ_LATENCY_CODE APS256XX_READ_LATENCY_5
#define DEFAULT_WRITE_LATENCY_CODE APS256XX_WRITE_LATENCY_5
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* APS256XX_CONF_H */
Drivers/STM32H7RSxx_BSP/Components/mx66uw1g45g/LICENSE.md
+27
View File
@@ -0,0 +1,27 @@
Copyright 2023 STMicroelectronics.
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation and/or
other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Drivers/STM32H7RSxx_BSP/Components/mx66uw1g45g/LICENSE.txt
+6
View File
@@ -0,0 +1,6 @@
This software component is provided to you as part of a software package and
applicable license terms are in the Package_license file. If you received this
software component outside of a package or without applicable license terms,
the terms of the BSD-3-Clause license shall apply.
You may obtain a copy of the BSD-3-Clause at:
https://opensource.org/licenses/BSD-3-Clause
Drivers/STM32H7RSxx_BSP/Components/mx66uw1g45g/Release_Notes.html
+61
View File
@@ -0,0 +1,61 @@
<!DOCTYPE html>
<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
<head>
<meta charset="utf-8" />
<meta name="generator" content="pandoc" />
<meta name="viewport" content="width=device-width, initial-scale=1.0, user-scalable=yes" />
<title>Release Notes for MX66UW1G45G OCTOSPI Component Driver</title>
<style type="text/css">
code{white-space: pre-wrap;}
span.smallcaps{font-variant: small-caps;}
span.underline{text-decoration: underline;}
div.column{display: inline-block; vertical-align: top; width: 50%;}
</style>
<link rel="stylesheet" href="_htmresc/mini-st_2020.css" />
<!--[if lt IE 9]>
<script src="//cdnjs.cloudflare.com/ajax/libs/html5shiv/3.7.3/html5shiv-printshiv.min.js"></script>
<![endif]-->
<link rel="icon" type="image/x-icon" href="_htmresc/favicon.png" />
</head>
<body>
<div class="row">
<div class="col-sm-12 col-lg-4">
<center>
<h1 id="release-notes-for-mx66uw1g45g-component-driver">Release Notes for <mark>MX66UW1G45G</mark> Component Driver</h1>
<p>Copyright © 2023 STMicroelectronics<br />
</p>
<a href="https://www.st.com" class="logo"><img src="_htmresc/st_logo_2020.png" alt="ST logo" /></a>
</center>
<h1 id="purpose">Purpose</h1>
<p>This driver provides a set of functions offered by MX66UW1G45G OCTOSPI component</p>
</div>
<div class="col-sm-12 col-lg-8">
<h1 id="update-history">Update History</h1>
<div class="collapse">
<input type="checkbox" id="collapse-section2" checked aria-hidden="true"> <label for="collapse-section2" aria-hidden="true"><strong>V1.1.0 / 08-December-2023</strong></label>
<div>
<h2 id="main-changes">Main Changes</h2>
<ul>
<li>Add implementation of release power-down command</li>
<li>Correct DataLength in case of MX66UW1G45G_DTR_TRANSFER</li>
</ul>
<h2 id="section"></h2>
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section1" aria-hidden="true"> <label for="collapse-section1" aria-hidden="true"><strong>V1.0.0 / 31-May-2023</strong></label>
<div>
<h2 id="main-changes-1">Main Changes</h2>
<ul>
<li>First official release of <strong>MX66UW1G45G</strong> octal SPI driver</li>
</ul>
<h2 id="section-1"></h2>
</div>
</div>
</div>
</div>
<footer class="sticky">
For complete documentation on <mark>STM32 Microcontrollers</mark> , visit: <span style="font-color: blue;"><a href="http://www.st.com/STM32">www.st.com</a></span>
</footer>
</body>
</html>
Drivers/STM32H7RSxx_BSP/Components/mx66uw1g45g/Release_Notes.md
+58
View File
@@ -0,0 +1,58 @@
---
pagetitle: Release Notes for MX66UW1G45G OCTOSPI Component Driver
lang: en
header-includes: <link rel="icon" type="image/x-icon" href="_htmresc/favicon.png" />
---
::: {.row}
::: {.col-sm-12 .col-lg-4}
<center>
# Release Notes for <mark>MX66UW1G45G</mark> Component Driver
Copyright &copy; 2023 STMicroelectronics\
[![ST logo](_htmresc/st_logo_2020.png)](https://www.st.com){.logo}
</center>
# Purpose
This driver provides a set of functions offered by MX66UW1G45G OCTOSPI component
:::
::: {.col-sm-12 .col-lg-8}
# Update History
::: {.collapse}
<input type="checkbox" id="collapse-section2" checked aria-hidden="true">
<label for="collapse-section2" aria-hidden="true">__V1.1.0 / 08-December-2023__</label>
<div>
## Main Changes
- Add implementation of release power-down command
- Correct DataLength in case of MX66UW1G45G_DTR_TRANSFER
##
</div>
:::
::: {.collapse}
<input type="checkbox" id="collapse-section1" aria-hidden="true">
<label for="collapse-section1" aria-hidden="true">__V1.0.0 / 31-May-2023__</label>
<div>
## Main Changes
- First official release of **MX66UW1G45G** octal SPI driver
##
</div>
:::
:::
:::
<footer class="sticky">
For complete documentation on <mark>STM32 Microcontrollers</mark> ,
visit: [[www.st.com](http://www.st.com/STM32)]{style="font-color: blue;"}
</footer>
Drivers/STM32H7RSxx_BSP/Components/mx66uw1g45g/_htmresc/Add button.svg
+2
View File
@@ -0,0 +1,2 @@
<?xml version="1.0" encoding="UTF-8"?>
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 200 200"><g fill="#13254a"><path d="M100 .212C44.868.212 0 44.889 0 99.788c0 55.132 44.868 100 100 100s100-44.868 100-100C200 44.889 155.132.212 100 .212zm0 181.164c-44.974 0-81.587-36.614-81.587-81.587 0-44.762 36.614-81.164 81.587-81.164 44.995 0 81.587 36.402 81.587 81.164 0 44.973-36.592 81.587-81.587 81.587z" style="fill: #e6007e;"/><path d="M141.1 88.127h-29.439V58.688c0-6.392-5.185-11.598-11.598-11.598-6.413 0-11.619 5.206-11.619 11.598v29.439H58.476c-6.392 0-11.598 5.185-11.598 11.598 0 6.413 5.206 11.619 11.598 11.619h29.968v29.968c0 6.392 5.206 11.598 11.619 11.598 6.413 0 11.598-5.206 11.598-11.598v-29.968H141.1c6.392 0 11.598-5.206 11.598-11.619 0-6.413-5.206-11.598-11.598-11.598z" style="fill: #e6007e;"/></g></svg>
Side by Side

After

Width:  |  Height:  |  Size: 832 B

Drivers/STM32H7RSxx_BSP/Components/mx66uw1g45g/_htmresc/Update.svg
+2
View File
@@ -0,0 +1,2 @@
<?xml version="1.0" encoding="UTF-8"?>
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 200 200"><g fill="#03234b"><path d="M170.934 64.569l-.04-.055-29.049 40.038-.057.079h14.867a59.366 59.366 0 0 1-1.488 15.615c-1.158 5.318-3.807 13.448-9.848 21.977-2.766 4.118-6.375 7.726-9.208 10.408-3.426 2.857-7.461 6.095-12 8.376-8.121 4.568-17.881 7.138-28.225 7.432-10.907.248-20.201-2.61-26.072-5.052-8.283-3.479-14.111-7.807-16.85-10.078-1.254-.956-2.25-1.907-3.057-2.676a28.662 28.662 0 0 0-1.157-1.069 158.874 158.874 0 0 0-1.479-1.362l-4.435-3.956 3.569 4.81.183.243c.2.263.548.722 1.048 1.389.276.334.579.747.93 1.226l.008.01c.689.939 1.546 2.107 2.664 3.322 3 3.536 8.178 8.801 15.808 13.801 5.969 3.866 15.672 8.901 28.001 10.935a79.05 79.05 0 0 0 12.485.998c7.97 0 15.651-1.228 22.828-3.649 6.366-1.877 12.192-4.981 17.053-7.771 6.16-3.936 10.817-7.586 14.654-11.488 8.084-7.899 14.884-17.913 19.15-28.199 3.259-7.594 5.456-15.727 6.529-24.175l.055-.425.083-.641H200l-29.066-40.063zM58.159 99.232l-12.655.563c-.097-.881-.159-1.986-.227-3.474a59.184 59.184 0 0 1 1.446-16.56c1.157-5.316 3.804-13.444 9.848-21.977 2.168-3.228 5.009-6.44 9.208-10.415 3.41-2.849 7.432-6.08 12.005-8.375 8.114-4.568 17.87-7.138 28.213-7.432 10.9-.25 20.196 2.607 26.072 5.045 8.258 3.473 14.105 7.812 16.857 10.091 1.257.951 2.253 1.904 3.057 2.673l.017.016c.43.411.801.766 1.136 1.051.475.438.841.777 1.091 1.01l.138.128.248.229 4.04 3.613-3.165-4.456c-.058-.083-.312-.417-.73-.971l-.507-.67a28.922 28.922 0 0 1-.901-1.192l-.02-.027c-.69-.945-1.548-2.121-2.677-3.346-3.002-3.537-8.182-8.803-15.813-13.801-5.964-3.865-15.662-8.9-27.997-10.935-8.484-1.363-21.496-2.009-35.313 2.651-6.355 1.88-12.186 4.983-17.054 7.772-6.163 3.944-10.82 7.595-14.654 11.488-8.079 7.894-14.882 17.909-19.155 28.2-3.268 7.624-5.463 15.757-6.523 24.173-.436 3.281-.642 5.421-.664 6.926L0 101.831l30.683 38.727.042.053 27.38-41.298.054-.081z" style="fill: #e6007e;"/></g></svg>
Side by Side

After

Width:  |  Height:  |  Size: 1.9 KiB

Drivers/STM32H7RSxx_BSP/Components/mx66uw1g45g/_htmresc/favicon.png
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 4.0 KiB

Drivers/STM32H7RSxx_BSP/Components/mx66uw1g45g/_htmresc/mini-st_2020.css
+1711
View File
File diff suppressed because it is too large. Load diff
Drivers/STM32H7RSxx_BSP/Components/mx66uw1g45g/_htmresc/st_logo_2020.png
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 7.3 KiB

Drivers/STM32H7RSxx_BSP/Components/mx66uw1g45g/mx66uw1g45g.c
+1815
View File
File diff suppressed because it is too large. Load diff
Drivers/STM32H7RSxx_BSP/Components/mx66uw1g45g/mx66uw1g45g.h
+384
View File
@@ -0,0 +1,384 @@
/**
******************************************************************************
* @file mx66uw1g45g.h
* @modify MCD Application Team
* @brief This file contains all the description of the
* MX66UW1G45G XSPI memory.
******************************************************************************
* @attention
*
* Copyright (c) 2023 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef MX66UW1G45G_H
#define MX66UW1G45G_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "mx66uw1g45g_conf.h"
/** @addtogroup BSP
* @{
*/
/** @addtogroup Components
* @{
*/
/** @addtogroup MX66UW1G45G
* @{
*/
/** @defgroup MX66UW1G45G_Exported_Constants MX66UW1G45G Exported Constants
* @{
*/
/**
* @brief MX66UW1G45G Size configuration
*/
#define MX66UW1G45G_BLOCK_64K (uint32_t)(64 * 1024) /* 1024 blocks of 64KBytes */
#define MX66UW1G45G_BLOCK_4K (uint32_t)(4 * 1024) /* 16384 sectors of 4KBytes */
#define MX66UW1G45G_FLASH_SIZE (uint32_t)(1024*1024*1024/8) /* 1 Gbits => 128MBytes */
#define MX66UW1G45G_PAGE_SIZE (uint32_t)256 /* 262144 pages of 256 Bytes */
/**
* @brief MX66UW1G45G Timing configuration
*/
#define MX66UW1G45G_BULK_ERASE_MAX_TIME 460000U
#define MX66UW1G45G_BLOCK_ERASE_MAX_TIME 1000U
#define MX66UW1G45G_BLOCK_4K_ERASE_MAX_TIME 400U
#define MX66UW1G45G_WRITE_REG_MAX_TIME 40U
#define MX66UW1G45G_RESET_MAX_TIME 100U /* when SWreset during erase operation */
#define MX66UW1G45G_AUTOPOLLING_INTERVAL_TIME 0x10U
/**
* @brief MX66UW1G45G Error codes
*/
#define MX66UW1G45G_OK (0)
#define MX66UW1G45G_ERROR (-1)
/**
* @brief re-definition of legacy memory mapped functions
*/
#define MX66UW1G45G_EnableMemoryMappedModeDTR MX66UW1G45G_EnableDTRMemoryMappedMode
#define MX66UW1G45G_EnableMemoryMappedModeSTR MX66UW1G45G_EnableSTRMemoryMappedMode
/******************************************************************************
* @brief MX66UW1G45G Commands
****************************************************************************/
/*******************************************************************/
/********************************* SPI ****************************/
/*******************************************************************/
/***** READ/WRITE MEMORY Operations with 3-Byte Address ****************************/
#define MX66UW1G45G_READ_CMD 0x03U /*!< Normal Read 3 Byte Address */
#define MX66UW1G45G_FAST_READ_CMD 0x0BU /*!< Fast Read 3 Byte Address */
#define MX66UW1G45G_PAGE_PROG_CMD 0x02U /*!< Page Program 3 Byte Address */
#define MX66UW1G45G_SECTOR_ERASE_4K_CMD 0x20U /*!< SubSector Erase 4KB 3 Byte Address */
#define MX66UW1G45G_BLOCK_ERASE_64K_CMD 0xD8U /*!< Sector Erase 64KB 3 Byte Address */
#define MX66UW1G45G_BULK_ERASE_CMD 0x60U /*!< Bulk Erase */
/***** READ/WRITE MEMORY Operations with 4-Byte Address ****************************/
#define MX66UW1G45G_4_BYTE_ADDR_READ_CMD 0x13U /*!< Normal Read 4 Byte address */
#define MX66UW1G45G_4_BYTE_ADDR_FAST_READ_CMD 0x0CU /*!< Fast Read 4 Byte address */
#define MX66UW1G45G_4_BYTE_PAGE_PROG_CMD 0x12U /*!< Page Program 4 Byte Address */
#define MX66UW1G45G_4_BYTE_SECTOR_ERASE_4K_CMD 0x21U /*!< SubSector Erase 4KB 4 Byte Address */
#define MX66UW1G45G_4_BYTE_BLOCK_ERASE_64K_CMD 0xDCU /*!< Sector Erase 64KB 4 Byte Address */
/***** Setting commands ************************************************************/
#define MX66UW1G45G_WRITE_ENABLE_CMD 0x06U /*!< Write Enable */
#define MX66UW1G45G_WRITE_DISABLE_CMD 0x04U /*!< Write Disable */
#define MX66UW1G45G_PROG_ERASE_SUSPEND_CMD 0xB0U /*!< Program/Erase suspend */
#define MX66UW1G45G_PROG_ERASE_RESUME_CMD 0x30U /*!< Program/Erase resume */
#define MX66UW1G45G_ENTER_DEEP_POWER_DOWN_CMD 0xB9U /*!< Enter deep power down */
#define MX66UW1G45G_RELEASE_DEEP_POWER_DOWN_CMD 0xABU /*!< Release from deep power down */
#define MX66UW1G45G_SET_BURST_LENGTH_CMD 0xC0U /*!< Set burst length */
#define MX66UW1G45G_ENTER_SECURED_OTP_CMD 0xB1U /*!< Enter secured OTP) */
#define MX66UW1G45G_EXIT_SECURED_OTP_CMD 0xC1U /*!< Exit secured OTP) */
/***** RESET commands ************************************************************/
#define MX66UW1G45G_NOP_CMD 0x00U /*!< No operation */
#define MX66UW1G45G_RESET_ENABLE_CMD 0x66U /*!< Reset Enable */
#define MX66UW1G45G_RESET_MEMORY_CMD 0x99U /*!< Reset Memory */
/***** Register Commands (SPI) ****************************************************/
#define MX66UW1G45G_READ_ID_CMD 0x9FU /*!< Read IDentification */
#define MX66UW1G45G_READ_SERIAL_FLASH_DISCO_PARAM_CMD 0x5AU /*!< Read Serial Flash Discoverable Parameter */
#define MX66UW1G45G_READ_STATUS_REG_CMD 0x05U /*!< Read Status Register */
#define MX66UW1G45G_READ_CFG_REG_CMD 0x15U /*!< Read configuration Register */
#define MX66UW1G45G_WRITE_STATUS_REG_CMD 0x01U /*!< Write Status Register */
#define MX66UW1G45G_READ_CFG_REG2_CMD 0x71U /*!< Read configuration Register2 */
#define MX66UW1G45G_WRITE_CFG_REG2_CMD 0x72U /*!< Write configuration Register2 */
#define MX66UW1G45G_READ_FAST_BOOT_REG_CMD 0x16U /*!< Read fast boot Register */
#define MX66UW1G45G_WRITE_FAST_BOOT_REG_CMD 0x17U /*!< Write fast boot Register */
#define MX66UW1G45G_ERASE_FAST_BOOT_REG_CMD 0x18U /*!< Erase fast boot Register */
#define MX66UW1G45G_READ_SECURITY_REG_CMD 0x2BU /*!< Read security Register */
#define MX66UW1G45G_WRITE_SECURITY_REG_CMD 0x2FU /*!< Write security Register */
#define MX66UW1G45G_READ_LOCK_REG_CMD 0x2DU /*!< Read lock Register */
#define MX66UW1G45G_WRITE_LOCK_REG_CMD 0x2CU /*!< Write lock Register */
#define MX66UW1G45G_READ_DPB_REG_CMD 0xE0U /*!< Read DPB register */
#define MX66UW1G45G_WRITE_DPB_REG_CMD 0xE1U /*!< Write DPB register */
#define MX66UW1G45G_READ_SPB_STATUS_CMD 0xE2U /*!< Read SPB status */
#define MX66UW1G45G_WRITE_SPB_BIT_CMD 0xE3U /*!< SPB bit program */
#define MX66UW1G45G_ERASE_ALL_SPB_CMD 0xE4U /*!< Erase all SPB bit */
#define MX66UW1G45G_WRITE_PROTECT_SEL_CMD 0x68U /*!< Write Protect selection */
#define MX66UW1G45G_GANG_BLOCK_LOCK_CMD 0x7EU /*!< Gang block lock: whole chip write protect */
#define MX66UW1G45G_GANG_BLOCK_UNLOCK_CMD 0x98U /*!< Gang block unlock: whole chip write unprotect */
#define MX66UW1G45G_READ_PASSWORD_REGISTER_CMD 0x27U /*!< Read Password */
#define MX66UW1G45G_WRITE_PASSWORD_REGISTER_CMD 0x28U /*!< Write Password */
#define MX66UW1G45G_PASSWORD_UNLOCK_CMD 0x29U /*!< Unlock Password */
/*******************************************************************/
/********************************* OPI ****************************/
/*******************************************************************/
/***** READ/WRITE MEMORY Operations ****************************/
#define MX66UW1G45G_OCTA_READ_CMD 0xEC13U /*!< Octa IO Read */
#define MX66UW1G45G_OCTA_READ_DTR_CMD 0xEE11U /*!< Octa IO Read DTR */
#define MX66UW1G45G_OCTA_PAGE_PROG_CMD 0x12EDU /*!< Octa Page Program */
#define MX66UW1G45G_OCTA_SECTOR_ERASE_4K_CMD 0x21DEU /*!< Octa SubSector Erase 4KB */
#define MX66UW1G45G_OCTA_BLOCK_ERASE_64K_CMD 0xDC23U /*!< Octa Sector Erase 64KB 3 */
#define MX66UW1G45G_OCTA_BULK_ERASE_CMD 0x609FU /*!< Octa Bulk Erase */
/***** Setting commands ************************************************************/
#define MX66UW1G45G_OCTA_WRITE_ENABLE_CMD 0x06F9U /*!< Octa Write Enable */
#define MX66UW1G45G_OCTA_WRITE_DISABLE_CMD 0x04FBU /*!< Octa Write Disable */
#define MX66UW1G45G_OCTA_PROG_ERASE_SUSPEND_CMD 0xB04FU /*!< Octa Program/Erase suspend */
#define MX66UW1G45G_OCTA_PROG_ERASE_RESUME_CMD 0x30CFU /*!< Octa Program/Erase resume */
#define MX66UW1G45G_OCTA_ENTER_DEEP_POWER_DOWN_CMD 0xB946U /*!< Octa Enter deep power down */
#define MX66UW1G45G_OCTA_RELEASE_DEEP_POWER_DOWN_CMD 0xAB54U /*!< Octa Release from deep power down */
#define MX66UW1G45G_OCTA_SET_BURST_LENGTH_CMD 0xC03FU /*!< Octa Set burst length */
#define MX66UW1G45G_OCTA_ENTER_SECURED_OTP_CMD 0xB14EU /*!< Octa Enter secured OTP) */
#define MX66UW1G45G_OCTA_EXIT_SECURED_OTP_CMD 0xC13EU /*!< Octa Exit secured OTP) */
/***** RESET commands ************************************************************/
#define MX66UW1G45G_OCTA_NOP_CMD 0x00FFU /*!< Octa No operation */
#define MX66UW1G45G_OCTA_RESET_ENABLE_CMD 0x6699U /*!< Octa Reset Enable */
#define MX66UW1G45G_OCTA_RESET_MEMORY_CMD 0x9966U /*!< Octa Reset Memory */
/***** Register Commands (OPI) ****************************************************/
#define MX66UW1G45G_OCTA_READ_ID_CMD 0x9F60U /*!< Octa Read IDentification */
#define MX66UW1G45G_OCTA_READ_SERIAL_FLASH_DISCO_PARAM_CMD 0x5AA5U /*!< Octa Read Serial Flash Discoverable Parameter */
#define MX66UW1G45G_OCTA_READ_STATUS_REG_CMD 0x05FAU /*!< Octa Read Status Register */
#define MX66UW1G45G_OCTA_READ_CFG_REG_CMD 0x15EAU /*!< Octa Read configuration Register */
#define MX66UW1G45G_OCTA_WRITE_STATUS_REG_CMD 0x01FEU /*!< Octa Write Status Register */
#define MX66UW1G45G_OCTA_READ_CFG_REG2_CMD 0x718EU /*!< Octa Read configuration Register2 */
#define MX66UW1G45G_OCTA_WRITE_CFG_REG2_CMD 0x728DU /*!< Octa Write configuration Register2 */
#define MX66UW1G45G_OCTA_READ_FAST_BOOT_REG_CMD 0x16E9U /*!< Octa Read fast boot Register */
#define MX66UW1G45G_OCTA_WRITE_FAST_BOOT_REG_CMD 0x17E8U /*!< Octa Write fast boot Register */
#define MX66UW1G45G_OCTA_ERASE_FAST_BOOT_REG_CMD 0x18E7U /*!< Octa Erase fast boot Register */
#define MX66UW1G45G_OCTA_READ_SECURITY_REG_CMD 0x2BD4U /*!< Octa Read security Register */
#define MX66UW1G45G_OCTA_WRITE_SECURITY_REG_CMD 0x2FD0U /*!< Octa Write security Register */
#define MX66UW1G45G_OCTA_READ_LOCK_REG_CMD 0x2DD2U /*!< Octa Read lock Register */
#define MX66UW1G45G_OCTA_WRITE_LOCK_REG_CMD 0x2CD3U /*!< Octa Write lock Register */
#define MX66UW1G45G_OCTA_READ_DPB_REG_CMD 0xE01FU /*!< Octa Read DPB register */
#define MX66UW1G45G_OCTA_WRITE_DPB_REG_CMD 0xE11EU /*!< Octa Write DPB register */
#define MX66UW1G45G_OCTA_READ_SPB_STATUS_CMD 0xE21DU /*!< Octa Read SPB status */
#define MX66UW1G45G_OCTA_WRITE_SPB_BIT_CMD 0xE31CU /*!< Octa SPB bit program */
#define MX66UW1G45G_OCTA_ERASE_ALL_SPB_CMD 0xE41BU /*!< Octa Erase all SPB bit */
#define MX66UW1G45G_OCTA_WRITE_PROTECT_SEL_CMD 0x6897U /*!< Octa Write Protect selection */
#define MX66UW1G45G_OCTA_GANG_BLOCK_LOCK_CMD 0x7E81U /*!< Octa Gang block lock: whole chip write protect */
#define MX66UW1G45G_OCTA_GANG_BLOCK_UNLOCK_CMD 0x9867U /*!< Octa Gang block unlock: whole chip write unprote*/
#define MX66UW1G45G_OCTA_READ_PASSWORD_REGISTER_CMD 0x27D8U /*!< Octa Read Password */
#define MX66UW1G45G_OCTA_WRITE_PASSWORD_REGISTER_CMD 0x28D7U /*!< Octa Write Password */
#define MX66UW1G45G_OCTA_PASSWORD_UNLOCK_CMD 0x29D6U /*!< Octa Unlock Password */
/******************************************************************************
* @brief MX66UW1G45G Registers
****************************************************************************/
/* Status Register */
#define MX66UW1G45G_SR_WIP 0x01U /*!< Write in progress */
#define MX66UW1G45G_SR_WEL 0x02U /*!< Write enable latch */
#define MX66UW1G45G_SR_PB 0x3CU /*!< Block protected against program and erase operations */
/* Configuration Register 1 */
#define MX66UW1G45G_CR1_ODS 0x07U /*!< Output driver strength */
#define MX66UW1G45G_CR1_TB 0x08U /*!< Top / bottom selected */
#define MX66UW1G45G_CR1_PBE 0x10U /*!< Preamble bit enable */
/* Configuration Register 2 */
/* Address : 0x00000000 */
#define MX66UW1G45G_CR2_REG1_ADDR 0x00000000U /*!< CR2 register address 0x00000000 */
#define MX66UW1G45G_CR2_SOPI 0x01U /*!< STR OPI Enable */
#define MX66UW1G45G_CR2_DOPI 0x02U /*!< DTR OPI Enable */
/* Address : 0x00000200 */
#define MX66UW1G45G_CR2_REG2_ADDR 0x00000200U /*!< CR2 register address 0x00000200 */
#define MX66UW1G45G_CR2_DQSPRC 0x01U /*!< DTR DQS pre-cycle */
#define MX66UW1G45G_CR2_DOS 0x02U /*!< DQS on STR mode */
/* Address : 0x00000300 */
#define MX66UW1G45G_CR2_REG3_ADDR 0x00000300U /*!< CR2 register address 0x00000300 */
#define MX66UW1G45G_CR2_DC 0x07U /*!< Dummy cycle */
#define MX66UW1G45G_CR2_DC_20_CYCLES 0x00U /*!< 20 Dummy cycles */
#define MX66UW1G45G_CR2_DC_18_CYCLES 0x01U /*!< 18 Dummy cycles */
#define MX66UW1G45G_CR2_DC_16_CYCLES 0x02U /*!< 16 Dummy cycles */
#define MX66UW1G45G_CR2_DC_14_CYCLES 0x03U /*!< 14 Dummy cycles */
#define MX66UW1G45G_CR2_DC_12_CYCLES 0x04U /*!< 12 Dummy cycles */
#define MX66UW1G45G_CR2_DC_10_CYCLES 0x05U /*!< 10 Dummy cycles */
#define MX66UW1G45G_CR2_DC_8_CYCLES 0x06U /*!< 8 Dummy cycles */
#define MX66UW1G45G_CR2_DC_6_CYCLES 0x07U /*!< 6 Dummy cycles */
/* Address : 0x00000500 */
#define MX66UW1G45G_CR2_REG4_ADDR 0x00000500U /*!< CR2 register address 0x00000500 */
#define MX66UW1G45G_CR2_PPTSEL 0x01U /*!< Preamble pattern selection */
/* Address : 0x40000000 */
#define MX66UW1G45G_CR2_REG5_ADDR 0x40000000U /*!< CR2 register address 0x40000000 */
#define MX66UW1G45G_CR2_DEFSOPI 0x01U /*!< Enable SOPI after power on reset */
#define MX66UW1G45G_CR2_DEFDOPI 0x02U /*!< Enable DOPI after power on reset */
/* Security Register */
#define MX66UW1G45G_SECR_SOI 0x01U /*!< Secured OTP indicator */
#define MX66UW1G45G_SECR_LDSO 0x02U /*!< Lock-down secured OTP */
#define MX66UW1G45G_SECR_PSB 0x04U /*!< Program suspend bit */
#define MX66UW1G45G_SECR_ESB 0x08U /*!< Erase suspend bit */
#define MX66UW1G45G_SECR_P_FAIL 0x20U /*!< Program fail flag */
#define MX66UW1G45G_SECR_E_FAIL 0x40U /*!< Erase fail flag */
#define MX66UW1G45G_SECR_WPSEL 0x80U /*!< Write protection selection */
#define XSPI_ALTERNATE_BYTE_PATTERN 0x00U
/**
* @}
*/
/** @defgroup MX66UW1G45G_Exported_Types MX66UW1G45G Exported Types
* @{
*/
typedef struct
{
uint32_t FlashSize; /*!< Size of the flash */
uint32_t EraseSectorSize; /*!< Size of sectors for the erase operation */
uint32_t EraseSectorsNumber; /*!< Number of sectors for the erase operation */
uint32_t EraseSubSectorSize; /*!< Size of subsector for the erase operation */
uint32_t EraseSubSectorNumber; /*!< Number of subsector for the erase operation */
uint32_t EraseSubSector1Size; /*!< Size of subsector 1 for the erase operation */
uint32_t EraseSubSector1Number; /*!< Number of subsector 1 for the erase operation */
uint32_t ProgPageSize; /*!< Size of pages for the program operation */
uint32_t ProgPagesNumber; /*!< Number of pages for the program operation */
} MX66UW1G45G_Info_t;
typedef enum
{
MX66UW1G45G_SPI_MODE = 0, /*!< 1-1-1 commands, Power on H/W default setting */
MX66UW1G45G_OPI_MODE /*!< 8-8-8 commands */
} MX66UW1G45G_Interface_t;
typedef enum
{
MX66UW1G45G_STR_TRANSFER = 0, /*!< Single Transfer Rate */
MX66UW1G45G_DTR_TRANSFER /*!< Double Transfer Rate */
} MX66UW1G45G_Transfer_t;
typedef enum
{
MX66UW1G45G_ERASE_4K = 0, /*!< 4K size Sector erase */
MX66UW1G45G_ERASE_64K, /*!< 64K size Block erase */
MX66UW1G45G_ERASE_BULK /*!< Whole bulk erase */
} MX66UW1G45G_Erase_t;
typedef enum
{
MX66UW1G45G_3BYTES_SIZE = 0, /*!< 3 Bytes address mode */
MX66UW1G45G_4BYTES_SIZE /*!< 4 Bytes address mode */
} MX66UW1G45G_AddressWidth_t;
/**
* @}
*/
/** @defgroup MX66UW1G45G_Exported_Functions MX66UW1G45G Exported Functions
* @{
*/
/* Function by commands combined */
int32_t MX66UW1G45G_GetFlashInfo(MX66UW1G45G_Info_t *pInfo);
int32_t MX66UW1G45G_AutoPollingMemReady(XSPI_HandleTypeDef *Ctx, MX66UW1G45G_Interface_t Mode,
MX66UW1G45G_Transfer_t Rate);
/* Read/Write Array Commands **************************************************/
int32_t MX66UW1G45G_ReadSTR(XSPI_HandleTypeDef *Ctx, MX66UW1G45G_Interface_t Mode,
MX66UW1G45G_AddressWidth_t AddressWidth, uint8_t *pData, uint32_t ReadAddr, uint32_t Size);
int32_t MX66UW1G45G_ReadDTR(XSPI_HandleTypeDef *Ctx, uint8_t *pData, uint32_t ReadAddr, uint32_t Size);
int32_t MX66UW1G45G_PageProgram(XSPI_HandleTypeDef *Ctx, MX66UW1G45G_Interface_t Mode,
MX66UW1G45G_AddressWidth_t AddressWidth, uint8_t *pData, uint32_t WriteAddr,
uint32_t Size);
int32_t MX66UW1G45G_PageProgramDTR(XSPI_HandleTypeDef *Ctx, uint8_t *pData, uint32_t WriteAddr, uint32_t Size);
int32_t MX66UW1G45G_BlockErase(XSPI_HandleTypeDef *Ctx, MX66UW1G45G_Interface_t Mode, MX66UW1G45G_Transfer_t Rate,
MX66UW1G45G_AddressWidth_t AddressWidth, uint32_t BlockAddress,
MX66UW1G45G_Erase_t BlockSize);
int32_t MX66UW1G45G_ChipErase(XSPI_HandleTypeDef *Ctx, MX66UW1G45G_Interface_t Mode, MX66UW1G45G_Transfer_t Rate);
int32_t MX66UW1G45G_EnableMemoryMappedModeSTR(XSPI_HandleTypeDef *Ctx, MX66UW1G45G_Interface_t Mode,
MX66UW1G45G_AddressWidth_t AddressWidth);
int32_t MX66UW1G45G_EnableMemoryMappedModeDTR(XSPI_HandleTypeDef *Ctx, MX66UW1G45G_Interface_t Mode);
int32_t MX66UW1G45G_Suspend(XSPI_HandleTypeDef *Ctx, MX66UW1G45G_Interface_t Mode, MX66UW1G45G_Transfer_t Rate);
int32_t MX66UW1G45G_Resume(XSPI_HandleTypeDef *Ctx, MX66UW1G45G_Interface_t Mode, MX66UW1G45G_Transfer_t Rate);
/* Register/Setting Commands **************************************************/
int32_t MX66UW1G45G_WriteEnable(XSPI_HandleTypeDef *Ctx, MX66UW1G45G_Interface_t Mode, MX66UW1G45G_Transfer_t Rate);
int32_t MX66UW1G45G_WriteDisable(XSPI_HandleTypeDef *Ctx, MX66UW1G45G_Interface_t Mode, MX66UW1G45G_Transfer_t Rate);
int32_t MX66UW1G45G_ReadStatusRegister(XSPI_HandleTypeDef *Ctx, MX66UW1G45G_Interface_t Mode,
MX66UW1G45G_Transfer_t Rate, uint8_t *Value);
int32_t MX66UW1G45G_WriteStatusRegister(XSPI_HandleTypeDef *Ctx, MX66UW1G45G_Interface_t Mode,
MX66UW1G45G_Transfer_t Rate, uint8_t Value);
int32_t MX66UW1G45G_WriteCfgRegister(XSPI_HandleTypeDef *Ctx, MX66UW1G45G_Interface_t Mode,
MX66UW1G45G_Transfer_t Rate, uint8_t Value);
int32_t MX66UW1G45G_ReadCfgRegister(XSPI_HandleTypeDef *Ctx, MX66UW1G45G_Interface_t Mode,
MX66UW1G45G_Transfer_t Rate, uint8_t *Value);
int32_t MX66UW1G45G_WriteCfg2Register(XSPI_HandleTypeDef *Ctx, MX66UW1G45G_Interface_t Mode,
MX66UW1G45G_Transfer_t Rate, uint32_t WriteAddr, uint8_t Value);
int32_t MX66UW1G45G_ReadCfg2Register(XSPI_HandleTypeDef *Ctx, MX66UW1G45G_Interface_t Mode,
MX66UW1G45G_Transfer_t Rate, uint32_t ReadAddr, uint8_t *Value);
int32_t MX66UW1G45G_WriteSecurityRegister(XSPI_HandleTypeDef *Ctx, MX66UW1G45G_Interface_t Mode,
MX66UW1G45G_Transfer_t Rate, uint8_t Value);
int32_t MX66UW1G45G_ReadSecurityRegister(XSPI_HandleTypeDef *Ctx, MX66UW1G45G_Interface_t Mode,
MX66UW1G45G_Transfer_t Rate, uint8_t *Value);
/* ID/Security Commands *******************************************************/
int32_t MX66UW1G45G_ReadID(XSPI_HandleTypeDef *Ctx, MX66UW1G45G_Interface_t Mode, MX66UW1G45G_Transfer_t Rate,
uint8_t *ID);
/* Reset Commands *************************************************************/
int32_t MX66UW1G45G_ResetEnable(XSPI_HandleTypeDef *Ctx, MX66UW1G45G_Interface_t Mode, MX66UW1G45G_Transfer_t Rate);
int32_t MX66UW1G45G_ResetMemory(XSPI_HandleTypeDef *Ctx, MX66UW1G45G_Interface_t Mode, MX66UW1G45G_Transfer_t Rate);
int32_t MX66UW1G45G_NoOperation(XSPI_HandleTypeDef *Ctx, MX66UW1G45G_Interface_t Mode, MX66UW1G45G_Transfer_t Rate);
int32_t MX66UW1G45G_EnterPowerDown(XSPI_HandleTypeDef *Ctx, MX66UW1G45G_Interface_t Mode,
MX66UW1G45G_Transfer_t Rate);
int32_t MX66UW1G45G_ReleasePowerDown(XSPI_HandleTypeDef *Ctx, MX66UW1G45G_Interface_t Mode,
MX66UW1G45G_Transfer_t Rate);
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* MX66UW1G45G_H */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
Drivers/STM32H7RSxx_BSP/Components/mx66uw1g45g/mx66uw1g45g_conf_template.h
+51
View File
@@ -0,0 +1,51 @@
/**
******************************************************************************
* @file mx66uw1g45g_conf.h
* @author MCD Application Team
* @brief MX66UW1G45G OctoSPI memory configuration template file.
* This file should be copied to the application folder and renamed
* to mx66uw1g45g_conf.h
******************************************************************************
* @attention
*
* Copyright (c) 2023 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef MX66UW1G45G_CONF_H
#define MX66UW1G45G_CONF_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32xxxx_hal.h"
/** @addtogroup BSP
* @{
*/
#define CONF_OSPI_ODS MX66UW1G45G_CR_ODS_24 /* MX66UW1G45G Output Driver Strength */
#define DUMMY_CYCLES_READ 8U
#define DUMMY_CYCLES_READ_OCTAL 6U
#define DUMMY_CYCLES_READ_OCTAL_DTR 6U
#define DUMMY_CYCLES_REG_OCTAL 4U
#define DUMMY_CYCLES_REG_OCTAL_DTR 5U
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* MX66UW1G45G_CONF_H */
Drivers/STM32H7RSxx_BSP/Components/wm8904/LICENSE.md
+27
View File
@@ -0,0 +1,27 @@
Copyright 2023 STMicroelectronics.
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation and/or
other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Drivers/STM32H7RSxx_BSP/Components/wm8904/LICENSE.txt
+6
View File
@@ -0,0 +1,6 @@
This software component is provided to you as part of a software package and
applicable license terms are in the Package_license file. If you received this
software component outside of a package or without applicable license terms,
the terms of the BSD-3-Clause license shall apply.
You may obtain a copy of the BSD-3-Clause at:
https://opensource.org/licenses/BSD-3-Clause
Drivers/STM32H7RSxx_BSP/Components/wm8904/Release_Notes.html
+98
View File
@@ -0,0 +1,98 @@
<!DOCTYPE html>
<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
<head>
<meta charset="utf-8" />
<meta name="generator" content="pandoc" />
<meta name="viewport" content="width=device-width, initial-scale=1.0, user-scalable=yes" />
<title>Release Notes for WM8904 Audio Codec Component Driver</title>
<style>
code{white-space: pre-wrap;}
span.smallcaps{font-variant: small-caps;}
div.columns{display: flex; gap: min(4vw, 1.5em);}
div.column{flex: auto; overflow-x: auto;}
div.hanging-indent{margin-left: 1.5em; text-indent: -1.5em;}
/* The extra [class] is a hack that increases specificity enough to
override a similar rule in reveal.js */
ul.task-list[class]{list-style: none;}
ul.task-list li input[type="checkbox"] {
font-size: inherit;
width: 0.8em;
margin: 0 0.8em 0.2em -1.6em;
vertical-align: middle;
}
.display.math{display: block; text-align: center; margin: 0.5rem auto;}
</style>
<link rel="stylesheet" href="_htmresc/mini-st_2020.css" />
<link rel="icon" type="image/x-icon" href="_htmresc/favicon.png" />
</head>
<body>
<div class="row">
<div class="col-sm-12 col-lg-4">
<center>
<h1 id="release-notes-for-wm8904-component-driver">Release Notes for
<mark>WM8904</mark> Component Driver</h1>
<p>Copyright © 2024 STMicroelectronics<br />
</p>
<a href="https://www.st.com" class="logo"><img
src="_htmresc/st_logo_2020.png" alt="ST logo" /></a>
</center>
<h1 id="purpose">Purpose</h1>
<p>This driver provides a set of audio functions offered by WM8904 Codec
component</p>
</div>
<section id="update-history" class="col-sm-12 col-lg-8">
<h1>Update History</h1>
<div class="collapse">
<input type="checkbox" id="collapse-section3" checked aria-hidden="true">
<label for="collapse-section3" aria-hidden="true"><strong>V1.1.1 /
15-September-2025</strong></label>
<h2 id="main-changes">Main Changes</h2>
<ul>
<li>Maintenance release of <strong>WM8904</strong> Audio Codec
driver</li>
<li>Changes compared with V1.1.0 release
<ul>
<li>Reduce excessive initialization delay by checking stabilization
ready flag instead of waiting a fixed time</li>
<li>Update initialization to use output device passed as parameter
instead of current device which is not yet initialized</li>
</ul></li>
</ul>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section2" aria-hidden="true">
<label for="collapse-section2" aria-hidden="true"><strong>V1.1.0 /
20-September-2024</strong></label>
<h2 id="main-changes-1">Main Changes</h2>
<ul>
<li>First maintenance release of <strong>WM8904</strong> Audio Codec
driver</li>
<li>Changes compared with V1.0.0 release
<ul>
<li>Update input devices to be defined as bitfields</li>
<li>Implement LINE_IN2 and digital microphone path</li>
<li>Add 24KHz audio frequency support</li>
<li>Update IsInitialized variable at the end of init function
WM8904_Init()</li>
</ul></li>
</ul>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section1" aria-hidden="true">
<label for="collapse-section1" aria-hidden="true"><strong>V1.0.0 /
28-February-2024</strong></label>
<h2 id="main-changes-2">Main Changes</h2>
<ul>
<li>First official release of <strong>WM8904</strong> Audio Codec
driver</li>
</ul>
</div>
</section>
</div>
<footer class="sticky">
For complete documentation on <mark>STM32 Microcontrollers</mark> ,
visit: <span style="font-color: blue;"><a
href="http://www.st.com/STM32">www.st.com</a></span>
</footer>
</body>
</html>
Drivers/STM32H7RSxx_BSP/Components/wm8904/Release_Notes.md
+75
View File
@@ -0,0 +1,75 @@
---
pagetitle: Release Notes for WM8904 Audio Codec Component Driver
lang: en
header-includes: <link rel="icon" type="image/x-icon" href="_htmresc/favicon.png" />
---
::: {.row}
::: {.col-sm-12 .col-lg-4}
<center>
# Release Notes for <mark>WM8904</mark> Component Driver
Copyright &copy; 2024 STMicroelectronics\
[![ST logo](_htmresc/st_logo_2020.png)](https://www.st.com){.logo}
</center>
# Purpose
This driver provides a set of audio functions offered by WM8904 Codec component
:::
::: {.col-sm-12 .col-lg-8}
# Update History
::: {.collapse}
<input type="checkbox" id="collapse-section3" checked aria-hidden="true">
<label for="collapse-section3" aria-hidden="true">__V1.1.1 / 15-September-2025__</label>
<div>
## Main Changes
- Maintenance release of **WM8904** Audio Codec driver
- Changes compared with V1.1.0 release
- Reduce excessive initialization delay by checking stabilization ready flag instead of waiting a fixed time
- Update initialization to use output device passed as parameter instead of current device which is not yet initialized
</div>
:::
::: {.collapse}
<input type="checkbox" id="collapse-section2" aria-hidden="true">
<label for="collapse-section2" aria-hidden="true">__V1.1.0 / 20-September-2024__</label>
<div>
## Main Changes
- First maintenance release of **WM8904** Audio Codec driver
- Changes compared with V1.0.0 release
- Update input devices to be defined as bitfields
- Implement LINE_IN2 and digital microphone path
- Add 24KHz audio frequency support
- Update IsInitialized variable at the end of init function WM8904_Init()
</div>
:::
::: {.collapse}
<input type="checkbox" id="collapse-section1" aria-hidden="true">
<label for="collapse-section1" aria-hidden="true">__V1.0.0 / 28-February-2024__</label>
<div>
## Main Changes
- First official release of **WM8904** Audio Codec driver
</div>
:::
:::
:::
<footer class="sticky">
For complete documentation on <mark>STM32 Microcontrollers</mark> ,
visit: [[www.st.com](http://www.st.com/STM32)]{style="font-color: blue;"}
</footer>
Drivers/STM32H7RSxx_BSP/Components/wm8904/_htmresc/Add button.svg
+2
View File
@@ -0,0 +1,2 @@
<?xml version="1.0" encoding="UTF-8"?>
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 200 200"><g fill="#13254a"><path d="M100 .212C44.868.212 0 44.889 0 99.788c0 55.132 44.868 100 100 100s100-44.868 100-100C200 44.889 155.132.212 100 .212zm0 181.164c-44.974 0-81.587-36.614-81.587-81.587 0-44.762 36.614-81.164 81.587-81.164 44.995 0 81.587 36.402 81.587 81.164 0 44.973-36.592 81.587-81.587 81.587z" style="fill: #e6007e;"/><path d="M141.1 88.127h-29.439V58.688c0-6.392-5.185-11.598-11.598-11.598-6.413 0-11.619 5.206-11.619 11.598v29.439H58.476c-6.392 0-11.598 5.185-11.598 11.598 0 6.413 5.206 11.619 11.598 11.619h29.968v29.968c0 6.392 5.206 11.598 11.619 11.598 6.413 0 11.598-5.206 11.598-11.598v-29.968H141.1c6.392 0 11.598-5.206 11.598-11.619 0-6.413-5.206-11.598-11.598-11.598z" style="fill: #e6007e;"/></g></svg>
Side by Side

After

Width:  |  Height:  |  Size: 832 B

Drivers/STM32H7RSxx_BSP/Components/wm8904/_htmresc/Update.svg
+2
View File
@@ -0,0 +1,2 @@
<?xml version="1.0" encoding="UTF-8"?>
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 200 200"><g fill="#03234b"><path d="M170.934 64.569l-.04-.055-29.049 40.038-.057.079h14.867a59.366 59.366 0 0 1-1.488 15.615c-1.158 5.318-3.807 13.448-9.848 21.977-2.766 4.118-6.375 7.726-9.208 10.408-3.426 2.857-7.461 6.095-12 8.376-8.121 4.568-17.881 7.138-28.225 7.432-10.907.248-20.201-2.61-26.072-5.052-8.283-3.479-14.111-7.807-16.85-10.078-1.254-.956-2.25-1.907-3.057-2.676a28.662 28.662 0 0 0-1.157-1.069 158.874 158.874 0 0 0-1.479-1.362l-4.435-3.956 3.569 4.81.183.243c.2.263.548.722 1.048 1.389.276.334.579.747.93 1.226l.008.01c.689.939 1.546 2.107 2.664 3.322 3 3.536 8.178 8.801 15.808 13.801 5.969 3.866 15.672 8.901 28.001 10.935a79.05 79.05 0 0 0 12.485.998c7.97 0 15.651-1.228 22.828-3.649 6.366-1.877 12.192-4.981 17.053-7.771 6.16-3.936 10.817-7.586 14.654-11.488 8.084-7.899 14.884-17.913 19.15-28.199 3.259-7.594 5.456-15.727 6.529-24.175l.055-.425.083-.641H200l-29.066-40.063zM58.159 99.232l-12.655.563c-.097-.881-.159-1.986-.227-3.474a59.184 59.184 0 0 1 1.446-16.56c1.157-5.316 3.804-13.444 9.848-21.977 2.168-3.228 5.009-6.44 9.208-10.415 3.41-2.849 7.432-6.08 12.005-8.375 8.114-4.568 17.87-7.138 28.213-7.432 10.9-.25 20.196 2.607 26.072 5.045 8.258 3.473 14.105 7.812 16.857 10.091 1.257.951 2.253 1.904 3.057 2.673l.017.016c.43.411.801.766 1.136 1.051.475.438.841.777 1.091 1.01l.138.128.248.229 4.04 3.613-3.165-4.456c-.058-.083-.312-.417-.73-.971l-.507-.67a28.922 28.922 0 0 1-.901-1.192l-.02-.027c-.69-.945-1.548-2.121-2.677-3.346-3.002-3.537-8.182-8.803-15.813-13.801-5.964-3.865-15.662-8.9-27.997-10.935-8.484-1.363-21.496-2.009-35.313 2.651-6.355 1.88-12.186 4.983-17.054 7.772-6.163 3.944-10.82 7.595-14.654 11.488-8.079 7.894-14.882 17.909-19.155 28.2-3.268 7.624-5.463 15.757-6.523 24.173-.436 3.281-.642 5.421-.664 6.926L0 101.831l30.683 38.727.042.053 27.38-41.298.054-.081z" style="fill: #e6007e;"/></g></svg>
Side by Side

After

Width:  |  Height:  |  Size: 1.9 KiB

Drivers/STM32H7RSxx_BSP/Components/wm8904/_htmresc/favicon.png
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 4.0 KiB

Drivers/STM32H7RSxx_BSP/Components/wm8904/_htmresc/mini-st_2020.css
+1711
View File
File diff suppressed because it is too large. Load diff
Drivers/STM32H7RSxx_BSP/Components/wm8904/_htmresc/st_logo_2020.png
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 7.3 KiB

Drivers/STM32H7RSxx_BSP/Components/wm8904/wm8904.c
+1045
View File
File diff suppressed because it is too large. Load diff
Drivers/STM32H7RSxx_BSP/Components/wm8904/wm8904.h
+224
View File
@@ -0,0 +1,224 @@
/**
******************************************************************************
* @file wm8904.h
* @author MCD Application Team
* @brief This file contains all the functions prototypes for the
* wm8904.c driver.
******************************************************************************
* @attention
*
* Copyright (c) 2023 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef WM8904_H
#define WM8904_H
/* Includes ------------------------------------------------------------------*/
#include "wm8904_reg.h"
#include <stddef.h>
/** @addtogroup BSP
* @{
*/
/** @addtogroup Component
* @{
*/
/** @addtogroup WM8904
* @{
*/
/** @defgroup WM8904_Exported_Types Exported Types
* @{
*/
typedef int32_t (*WM8904_Init_Func) (void);
typedef int32_t (*WM8904_DeInit_Func) (void);
typedef int32_t (*WM8904_GetTick_Func) (void);
typedef int32_t (*WM8904_WriteReg_Func)(uint16_t, uint16_t, uint8_t*, uint16_t);
typedef int32_t (*WM8904_ReadReg_Func) (uint16_t, uint16_t, uint8_t*, uint16_t);
typedef struct
{
WM8904_Init_Func Init;
WM8904_DeInit_Func DeInit;
uint16_t Address;
WM8904_WriteReg_Func WriteReg;
WM8904_ReadReg_Func ReadReg;
WM8904_GetTick_Func GetTick;
} WM8904_IO_t;
typedef struct
{
WM8904_IO_t IO;
wm8904_ctx_t Ctx;
uint8_t IsInitialized;
} WM8904_Object_t;
typedef struct
{
uint32_t InputDevice;
uint32_t OutputDevice;
uint32_t Frequency;
uint32_t Resolution;
uint32_t Volume;
} WM8904_Init_t;
typedef struct
{
int32_t ( *Init ) ( WM8904_Object_t *, WM8904_Init_t* );
int32_t ( *DeInit ) ( WM8904_Object_t * );
int32_t ( *ReadID ) ( WM8904_Object_t *, uint32_t * );
int32_t ( *Play ) ( WM8904_Object_t * );
int32_t ( *Pause ) ( WM8904_Object_t * );
int32_t ( *Resume ) ( WM8904_Object_t * );
int32_t ( *Stop ) ( WM8904_Object_t *, uint32_t );
int32_t ( *SetFrequency ) ( WM8904_Object_t *, uint32_t );
int32_t ( *GetFrequency ) ( WM8904_Object_t *, uint32_t*);
int32_t ( *SetVolume ) ( WM8904_Object_t *, uint32_t, uint8_t );
int32_t ( *GetVolume ) ( WM8904_Object_t *, uint32_t, uint8_t*);
int32_t ( *SetMute ) ( WM8904_Object_t *, uint32_t );
int32_t ( *SetOutputMode ) ( WM8904_Object_t *, uint32_t );
int32_t ( *SetResolution ) ( WM8904_Object_t *, uint32_t );
int32_t ( *GetResolution ) ( WM8904_Object_t *, uint32_t*);
int32_t ( *SetProtocol ) ( WM8904_Object_t *, uint32_t );
int32_t ( *GetProtocol ) ( WM8904_Object_t *, uint32_t*);
int32_t ( *Reset ) ( WM8904_Object_t * );
} WM8904_Drv_t;
/**
* @}
*/
/** @defgroup WM8904_Exported_Constants Exported Constants
* @{
*/
#define WM8904_OK (0)
#define WM8904_ERROR (-1)
/******************************************************************************/
/*************************** Codec User defines ******************************/
/******************************************************************************/
/* Audio Input Device */
#define WM8904_IN_NONE 0x0000U
#define WM8904_IN_MIC1 0x0100U
#define WM8904_IN_MIC2 0x0200U
#define WM8904_IN_MIC1_MIC2 0x0300U
#define WM8904_IN_LINE1 0x0400U
#define WM8904_IN_LINE2 0x0800U
#define WM8904_IN_DIGITAL_MIC1 0x1000U
#define WM8904_IN_DIGITAL_MIC2 0x2000U
/* Audio Output Device */
#define WM8904_OUT_NONE 0x0000U
#define WM8904_OUT_HEADPHONE 0x0001U
#define WM8904_OUT_LINE 0x0002U
#define WM8904_OUT_BOTH 0x0003U
/* AUDIO FREQUENCY */
#define WM8904_FREQUENCY_192K 192000U
#define WM8904_FREQUENCY_176K 176400U
#define WM8904_FREQUENCY_96K 96000U
#define WM8904_FREQUENCY_88K 88200U
#define WM8904_FREQUENCY_48K 48000U
#define WM8904_FREQUENCY_44K 44100U
#define WM8904_FREQUENCY_32K 32000U
#define WM8904_FREQUENCY_24K 24000U
#define WM8904_FREQUENCY_22K 22050U
#define WM8904_FREQUENCY_16K 16000U
#define WM8904_FREQUENCY_11K 11025U
#define WM8904_FREQUENCY_8K 8000U
/* AUDIO RESOLUTION */
#define WM8904_RESOLUTION_16B 0x00U
#define WM8904_RESOLUTION_20B 0x01U
#define WM8904_RESOLUTION_24B 0x02U
#define WM8904_RESOLUTION_32B 0x03U
/* Codec stop options */
#define WM8904_PDWN_HW 0x00U
#define WM8904_PDWN_SW 0x01U
/* Volume Input Output selection */
#define VOLUME_INPUT 0U
#define VOLUME_OUTPUT 1U
/* MUTE commands */
#define WM8904_MUTE_ON 1U
#define WM8904_MUTE_OFF 0U
/* AUDIO PROTOCOL */
#define WM8904_PROTOCOL_R_JUSTIFIED 0x0000U
#define WM8904_PROTOCOL_L_JUSTIFIED 0x0001U
#define WM8904_PROTOCOL_I2S 0x0002U
#define WM8904_PROTOCOL_DSP 0x0003U
/**
* @brief WM8904 ID
*/
#define WM8904_ID 0x8904U
#define WM8904_ID_MASK 0xFFFFU
/**
* @}
*/
/** @addtogroup WM8904_Exported_Variables
* @{
*/
/* Audio driver structure */
extern WM8904_Drv_t WM8904_Driver;
/**
* @}
*/
/** @addtogroup WM8904_Exported_Functions
* @{
*/
/*------------------------------------------------------------------------------
Audio Codec functions
------------------------------------------------------------------------------*/
/* High Layer codec functions */
int32_t WM8904_RegisterBusIO (WM8904_Object_t *pObj, const WM8904_IO_t *pIO);
int32_t WM8904_Init(WM8904_Object_t *pObj, WM8904_Init_t *pInit);
int32_t WM8904_DeInit(WM8904_Object_t *pObj);
int32_t WM8904_ReadID(WM8904_Object_t *pObj, uint32_t *Id);
int32_t WM8904_Play(WM8904_Object_t *pObj);
int32_t WM8904_Pause(WM8904_Object_t *pObj);
int32_t WM8904_Resume(WM8904_Object_t *pObj);
int32_t WM8904_Stop(WM8904_Object_t *pObj, uint32_t CodecPdwnMode);
int32_t WM8904_SetVolume(WM8904_Object_t *pObj, uint32_t InputOutput, uint8_t Volume);
int32_t WM8904_GetVolume(WM8904_Object_t *pObj, uint32_t InputOutput, uint8_t *Volume);
int32_t WM8904_SetMute(WM8904_Object_t *pObj, uint32_t Cmd);
int32_t WM8904_SetOutputMode(WM8904_Object_t *pObj, uint32_t Output);
int32_t WM8904_SetResolution(WM8904_Object_t *pObj, uint32_t Resolution);
int32_t WM8904_GetResolution(WM8904_Object_t *pObj, uint32_t *Resolution);
int32_t WM8904_SetProtocol(WM8904_Object_t *pObj, uint32_t Protocol);
int32_t WM8904_GetProtocol(WM8904_Object_t *pObj, uint32_t *Protocol);
int32_t WM8904_SetFrequency(WM8904_Object_t *pObj, uint32_t AudioFreq);
int32_t WM8904_GetFrequency(WM8904_Object_t *pObj, uint32_t *AudioFreq);
int32_t WM8904_Reset(WM8904_Object_t *pObj);
/**
* @}
*/
#endif /* WM8904_H */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
Drivers/STM32H7RSxx_BSP/Components/wm8904/wm8904_reg.c
+88
View File
@@ -0,0 +1,88 @@
/**
******************************************************************************
* @file wm8904_reg.c
* @author MCD Application Team
* @brief This file provides unitary register function to control the WM8904
* Audio Codec driver.
******************************************************************************
* @attention
*
* Copyright (c) 2023 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "wm8904_reg.h"
/** @addtogroup BSP
* @{
*/
/** @addtogroup Components
* @{
*/
/** @addtogroup wm8904
* @brief This file provides a set of functions needed to drive the
* WM8904 audio codec.
* @{
*/
/************** Generic Function *******************/
/*******************************************************************************
* Function Name : wm8904_read_reg
* Description : Generic Reading function. It must be full-filled with either
* I2C or SPI reading functions
* Input : Register Address, length of buffer
* Output : data Read
*******************************************************************************/
int32_t wm8904_read_reg(const wm8904_ctx_t *ctx, uint16_t reg, uint16_t* data, uint16_t length)
{
int32_t ret;
uint16_t tmp;
ret = ctx->ReadReg(ctx->handle, reg, (uint8_t *)data, length);
if(ret >= 0)
{
tmp = ((uint16_t)(*data >> 8) & 0x00FFU);
tmp |= ((uint16_t)(*data << 8) & 0xFF00U);
*data = tmp;
}
return ret;
}
/*******************************************************************************
* Function Name : wm8904_write_reg
* Description : Generic Writing function. It must be full-filled with either
* I2C or SPI writing function
* Input : Register Address, data to be written, length of buffer
* Output : None
*******************************************************************************/
int32_t wm8904_write_reg(const wm8904_ctx_t *ctx, uint16_t reg, const uint16_t *data, uint16_t length)
{
uint16_t tmp;
tmp = ((uint16_t)(*data >> 8) & 0x00FFU);
tmp |= ((uint16_t)(*data << 8) & 0xFF00U);
return ctx->WriteReg(ctx->handle, reg, (uint8_t *)&tmp, length);
}
/******************************************************************************/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
Drivers/STM32H7RSxx_BSP/Components/wm8904/wm8904_reg.h
+228
View File
@@ -0,0 +1,228 @@
/**
******************************************************************************
* @file wm8904_reg.h
* @author MCD Application Team
* @brief Header of wm8904_reg.c
******************************************************************************
* @attention
*
* Copyright (c) 2023 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef WM8904_REG_H
#define WM8904_REG_H
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
/** @addtogroup BSP
* @{
*/
/** @addtogroup Component
* @{
*/
/** @addtogroup WM8904
* @{
*/
/** @addtogroup WM8904_Exported_Constants
* @{
*/
/******************************************************************************/
/****************************** REGISTER MAPPING ******************************/
/******************************************************************************/
/* SW Reset */
#define WM8904_SW_RESET 0x0000U
/* Bias Control */
#define WM8904_BIAS_CONTROL0 0x0004U
#define WM8904_VMID_CONTROL0 0x0005U
#define WM8904_MIC_BIAS_CONTROL0 0x0006U
#define WM8904_MIC_BIAS_CONTROL1 0x0007U
#define WM8904_ANALOG_ADC0 0x000AU
/* Power Management */
#define WM8904_PWR_MANAGEMENT0 0x000CU
#define WM8904_PWR_MANAGEMENT2 0x000EU
#define WM8904_PWR_MANAGEMENT3 0x000FU
#define WM8904_PWR_MANAGEMENT6 0x0012U
/* Clock Rates */
#define WM8904_CLOCK_RATES0 0x0014U
#define WM8904_CLOCK_RATES1 0x0015U
#define WM8904_CLOCK_RATES2 0x0016U
/* Audio Interface */
#define WM8904_AUDIO_INTERFACE0 0x0018U
#define WM8904_AUDIO_INTERFACE1 0x0019U
#define WM8904_AUDIO_INTERFACE2 0x001AU
#define WM8904_AUDIO_INTERFACE3 0x001BU
/* DAC */
#define WM8904_DAC_DIGITAL_VOL_LEFT 0x001EU
#define WM8904_DAC_DIGITAL_VOL_RIGHT 0x001FU
#define WM8904_DAC_DIGITAL0 0x0020U
#define WM8904_DAC_DIGITAL1 0x0021U
/* ADC */
#define WM8904_ADC_DIGITAL_VOL_LEFT 0x0024U
#define WM8904_ADC_DIGITAL_VOL_RIGHT 0x0025U
#define WM8904_ADC_DIGITAL0 0x0026U
#define WM8904_DIGITAL_MICROPHONE0 0x0027U
/* DRC */
#define WM8904_DRC0 0x0028U
#define WM8904_DRC1 0x0029U
#define WM8904_DRC2 0x002AU
#define WM8904_DRC3 0x002BU
/* Analog */
#define WM8904_ANALOG_LEFT_INPUT0 0x002CU
#define WM8904_ANALOG_RIGHT_INPUT0 0x002DU
#define WM8904_ANALOG_LEFT_INPUT1 0x002EU
#define WM8904_ANALOG_RIGHT_INPUT1 0x002FU
#define WM8904_ANALOG_OUTPUT1_LEFT 0x0039U
#define WM8904_ANALOG_OUTPUT1_RIGHT 0x003AU
#define WM8904_ANALOG_OUTPUT2_LEFT 0x003BU
#define WM8904_ANALOG_OUTPUT2_RIGHT 0x003CU
#define WM8904_ANALOG_OUTPUT12_ZC 0x003DU
/* DC Servo */
#define WM8904_DC_SERVO0 0x0043U
#define WM8904_DC_SERVO1 0x0044U
#define WM8904_DC_SERVO2 0x0045U
#define WM8904_DC_SERVO4 0x0047U
#define WM8904_DC_SERVO5 0x0048U
#define WM8904_DC_SERVO6 0x0049U
#define WM8904_DC_SERVO7 0x004AU
#define WM8904_DC_SERVO8 0x004BU
#define WM8904_DC_SERVO9 0x004CU
#define WM8904_DC_SERVO_READBACK0 0x004DU
/* Analog */
#define WM8904_ANALOG_HP0 0x005AU
#define WM8904_ANALOG_LINEOUT0 0x005EU
/* Charge pump */
#define WM8904_CHARGE_PUMP0 0x0062U
/* Class W/G */
#define WM8904_CLASS_W0 0x0068U
/* Write Sequencer */
#define WM8904_WRITE_SEQUENCER0 0x006CU
#define WM8904_WRITE_SEQUENCER1 0x006DU
#define WM8904_WRITE_SEQUENCER2 0x006EU
#define WM8904_WRITE_SEQUENCER3 0x006FU
#define WM8904_WRITE_SEQUENCER4 0x0070U
/* FLL Control */
#define WM8904_FLL_CONTROL1 0x0074U
#define WM8904_FLL_CONTROL2 0x0075U
#define WM8904_FLL_CONTROL3 0x0076U
#define WM8904_FLL_CONTROL4 0x0077U
#define WM8904_FLL_CONTROL5 0x0078U
/* GPIO Control */
#define WM8904_GPIO_CONTROL1 0x0079U
#define WM8904_GPIO_CONTROL2 0x007AU
#define WM8904_GPIO_CONTROL3 0x007BU
#define WM8904_GPIO_CONTROL4 0x007CU
#define WM8904_DIGITAL_PULLS 0x007EU
/* Interrupt */
#define WM8904_INTERRUPT_STATUS 0x007FU
#define WM8904_INTERRUPT_STATUS_MASK 0x0080U
#define WM8904_INTERRUPT_POLARITY 0x0081U
#define WM8904_INTERRUPT_DEBOUNCE 0x0082U
/* EQ */
#define WM8904_EQ1 0x0086U
#define WM8904_EQ2 0x0087U
#define WM8904_EQ3 0x0088U
#define WM8904_EQ4 0x0089U
#define WM8904_EQ5 0x008AU
#define WM8904_EQ6 0x008BU
#define WM8904_EQ7 0x008CU
#define WM8904_EQ8 0x008DU
#define WM8904_EQ9 0x008EU
#define WM8904_EQ10 0x008FU
#define WM8904_EQ11 0x0090U
#define WM8904_EQ12 0x0091U
#define WM8904_EQ13 0x0092U
#define WM8904_EQ14 0x0093U
#define WM8904_EQ15 0x0094U
#define WM8904_EQ16 0x0095U
#define WM8904_EQ17 0x0096U
#define WM8904_EQ18 0x0097U
#define WM8904_EQ19 0x0098U
#define WM8904_EQ20 0x0099U
#define WM8904_EQ21 0x009AU
#define WM8904_EQ22 0x009BU
#define WM8904_EQ23 0x009CU
#define WM8904_EQ24 0x009DU
#define WM8904_ADC_TEST0 0x00C6U
#define WM8904_FLL_TEST0 0x00F7U
#define WM8904_FLL_TEST1 0x00F8U
/**
* @}
*/
/************** Generic Function *******************/
typedef int32_t (*WM8904_Write_Func)(void *, uint16_t, uint8_t*, uint16_t);
typedef int32_t (*WM8904_Read_Func) (void *, uint16_t, uint8_t*, uint16_t);
typedef struct
{
WM8904_Write_Func WriteReg;
WM8904_Read_Func ReadReg;
void *handle;
} wm8904_ctx_t;
/*******************************************************************************
* Register : Generic - All
* Address : Generic - All
* Bit Group Name: None
* Permission : W
*******************************************************************************/
int32_t wm8904_write_reg(const wm8904_ctx_t *ctx, uint16_t reg, const uint16_t *data, uint16_t length);
int32_t wm8904_read_reg(const wm8904_ctx_t *ctx, uint16_t reg, uint16_t* data, uint16_t length);
#ifdef __cplusplus
}
#endif
#endif /* WM8904_REG_H */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/