CubeMX: SPI4 + SDMMC1/FatFs + I2S6, audio BSP et debug VS Code (Linux)
Regeneration CubeMX (Appli) preparant le driver ST67W611M1 et la carte SD : - SPI4 (PE12/13/14, CS PF8) + DMA GPDMA1 canaux 4/5, SPI_RDY (PD12/EXTI12), CHIP_EN (PD13) et BOOT (PD15) pour la X-NUCLEO-67W61M1 sur l'Arduino - SDMMC1 + FatFs (appels d'init non generes dans main, IRQ SDMMC1 prio 14), PM14 en open-drain ; I2S6_CK sur PA5 pour liberer PC12 (SDMMC1_CK) - HAL UART retire ; USE_BSP_COM_FEATURE=0 - Audio preserve : ADF 4/16/24, prio IRQ 2, DMA canal 0 en priorite haute, GPDMA1_Channel2_IRQHandler deplace dans audio_irq.c (hors fichiers generes), BSP_MX_I2S6_Init (renommage dans le BSP pour eviter le conflit avec CubeMX) - Middlewares/ST/ST67W6X_Network_Driver, FatFs et sources HAL SPI/SD ajoutes (driver ST67 pas encore integre au build) Build et debug sous Linux : - gcc/toolchain-env.sh, gdbserver.sh, arm-gdb.sh : outils de STM32CubeIDE par glob ; flash.sh les retrouve ; ruby_compat.rb pour Ruby >= 3.2 (TouchGFX) - makefile_appli : sources SD/SPI/FatFs/audio_irq ; chmod +x des .out TouchGFX - Objets de build (*.o, *.d, *.su) retires de l'index (deja dans .gitignore) - AGENTS.md : toolchain Linux, configs VS Code (cppdbg et ST stlinkgdbtarget), pieges de l'extension ST (.settings/ide.store.json, preRunCommands reset) Verifie sur carte : audio OK, debug Appli/Boot OK. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
This commit is contained in:
thomasandClaude Sonnet 5.5 committed
1 parent
b119a6abd7
commit
66bb319423
1092 files changed
+172728
-133236
No files matched your search
@@ -0,0 +1,69 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file sd_diskio_config.h
|
||||
* @author MCD Application Team
|
||||
* @brief Template for the sd_diskio_config.h. This file should be copied and
|
||||
under project.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2023 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the st_license.txt
|
||||
* file in the root directory of this software component.
|
||||
* If no st_license.txt file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
#ifndef SD_DISKIO_CONFIG_H
|
||||
#define SD_DISKIO_CONFIG_H
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
|
||||
#include "stm32{family}xx_hal.h"
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
|
||||
/* Maximum waiting time to do an operation in the HAL_SD_ReadBlocks() and HAL_SD_WriteBlocks() */
|
||||
#define SD_TIMEOUT 30 * 1000
|
||||
|
||||
/*
|
||||
* Depending on the usecase, the SD card initialization could be done at the
|
||||
* application level, if it is the case define the flag below to enable
|
||||
* the MX_SD_Init().
|
||||
*/
|
||||
#define ENABLE_SD_INIT 0
|
||||
|
||||
/*
|
||||
* when using cacheable memory region, it may be needed to maintain the cache
|
||||
* validity. Enable the define below to activate a cache maintenance at each
|
||||
* read and write operation.
|
||||
* Notice: This is applicable only for cortex M7 based platform.
|
||||
*/
|
||||
|
||||
#define ENABLE_SD_DMA_CACHE_MAINTENANCE 1
|
||||
|
||||
|
||||
extern SD_HandleTypeDef hsd_sdmmc1;
|
||||
|
||||
/* Default handle used in sd_diskio.c file */
|
||||
#define sdmmc_handle hsd_sdmmc1
|
||||
|
||||
/* Default Init function of sdmmc IP used in sd_diskio.c file */
|
||||
#if (ENABLE_SD_INIT == 1)
|
||||
extern void MX_SDMMC1_SD_Init(void);
|
||||
#define sdmmc_sd_init MX_SDMMC1_SD_Init
|
||||
#endif
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* SD_DISKIO_CONFIG_H */
|
||||
@@ -0,0 +1,47 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file sram_diskio_config.h
|
||||
* @author MCD Application Team
|
||||
* @brief Template for the sram_diskio_config.h. This file should be copied and
|
||||
under project.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2023 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the st_license.txt
|
||||
* file in the root directory of this software component.
|
||||
* If no st_license.txt file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
#ifndef SRAM_DISKIO_CONFIG_H
|
||||
#define SRAM_DISKIO_CONFIG_H
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
|
||||
#include "stm32{family}xx_hal.h"
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* Block size */
|
||||
#define BLOCK_SIZE 512
|
||||
|
||||
/* Base Address */
|
||||
#define SRAM_DISK_BASE_ADDR 0x24000000
|
||||
|
||||
/* SRAM Disk size in bytes */
|
||||
#define SRAM_DISK_SIZE (32 * 1024)
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* SRAM_DISKIO_CONFIG_H */
|
||||
@@ -0,0 +1,44 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file usbh_diskio_config.h
|
||||
* @author MCD Application Team
|
||||
* @brief Template for the usbh_diskio_config.h. This file should be copied and
|
||||
under project.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2023 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the st_license.txt
|
||||
* file in the root directory of this software component.
|
||||
* If no st_license.txt file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
#ifndef USBH_DISKIO_CONFIG_H
|
||||
#define USBH_DISKIO_CONFIG_H
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
|
||||
#include "usbh_msc.h"
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* Block size */
|
||||
#define USB_BLOCK_SIZE 512
|
||||
|
||||
extern USBH_HandleTypeDef hUsbHost;
|
||||
/* Default handle used in usbh_diskio.c file */
|
||||
#define hUsb_Host hUsbHost
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* USBH_DISKIO_CONFIG_H */
|
||||
Reference in new issue
Block a user