/** ****************************************************************************** * @file stm32h7s78_discovery.h * @author MCD Application Team * @brief This file contains definitions for STM32H7S78-DK: * LEDs * push-buttons * COM ports * hardware resources. ****************************************************************************** * @attention * * Copyright (c) 2022 STMicroelectronics. * All rights reserved. * * This software is licensed under terms that can be found in the LICENSE file * in the root directory of this software component. * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef STM32H7S78_DISCOVERY_H #define STM32H7S78_DISCOVERY_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32h7s78_discovery_conf.h" #include "stm32h7s78_discovery_errno.h" #if (USE_BSP_COM_FEATURE > 0) #include #endif /* USE_BSP_COM_FEATURE */ /** @addtogroup BSP * @{ */ /** @addtogroup STM32H7S78_DK * @{ */ /** @addtogroup STM32H7S78_DK_LOW_LEVEL * @{ */ /** @defgroup STM32H7S78_DK_LOW_LEVEL_Exported_Types Exported Types * @{ */ typedef enum { LD1 = 0U, LED_GREEN = LD1, LD2 = 1U, LED_ORANGE = LD2, LD3 = 2U, LED_RED = LD3, LD4 = 3U, LED_BLUE = LD4, LEDn } Led_TypeDef; typedef enum { BUTTON_USER = 0U, BUTTONn } Button_TypeDef; typedef enum { BUTTON_MODE_GPIO = 0U, BUTTON_MODE_EXTI = 1U } ButtonMode_TypeDef; #if (USE_BSP_COM_FEATURE > 0) typedef enum { COM1 = 0U, COM2 = 1U, COMn } COM_TypeDef; typedef enum { COM_STOPBITS_1 = UART_STOPBITS_1, COM_STOPBITS_2 = UART_STOPBITS_2, } COM_StopBitsTypeDef; typedef enum { COM_PARITY_NONE = UART_PARITY_NONE, COM_PARITY_EVEN = UART_PARITY_EVEN, COM_PARITY_ODD = UART_PARITY_ODD, } COM_ParityTypeDef; typedef enum { COM_HWCONTROL_NONE = UART_HWCONTROL_NONE, COM_HWCONTROL_RTS = UART_HWCONTROL_RTS, COM_HWCONTROL_CTS = UART_HWCONTROL_CTS, COM_HWCONTROL_RTS_CTS = UART_HWCONTROL_RTS_CTS, } COM_HwFlowCtlTypeDef; typedef enum { COM_WORDLENGTH_7B = UART_WORDLENGTH_7B, COM_WORDLENGTH_8B = UART_WORDLENGTH_8B, COM_WORDLENGTH_9B = UART_WORDLENGTH_9B, } COM_WordLengthTypeDef; typedef struct { uint32_t BaudRate; COM_WordLengthTypeDef WordLength; COM_StopBitsTypeDef StopBits; COM_ParityTypeDef Parity; COM_HwFlowCtlTypeDef HwFlowCtl; } COM_InitTypeDef; #if (USE_HAL_UART_REGISTER_CALLBACKS == 1) typedef struct { void (* pMspInitCb)(UART_HandleTypeDef *); void (* pMspDeInitCb)(UART_HandleTypeDef *); } BSP_COM_Cb_t; #endif /* (USE_HAL_UART_REGISTER_CALLBACKS == 1) */ #endif /* USE_BSP_COM_FEATURE > 0 */ /** * @} */ /** @defgroup STM32H7S78_DK_LOW_LEVEL_Exported_Constants Exported Constants * @{ */ /** * @brief Define for STM32H7S78_DK board */ /** * @brief STM32H7S78 Discovery BSP Driver version number */ #define STM32H7S78_DK_BSP_VERSION_MAIN (0x01UL) /*!< [31:24] main version */ #define STM32H7S78_DK_BSP_VERSION_SUB1 (0x00UL) /*!< [23:16] sub1 version */ #define STM32H7S78_DK_BSP_VERSION_SUB2 (0x02UL) /*!< [15:8] sub2 version */ #define STM32H7S78_DK_BSP_VERSION_RC (0x00UL) /*!< [7:0] release candidate */ #define STM32H7S78_DK_BSP_VERSION ((STM32H7S78_DK_BSP_VERSION_MAIN << 24)\ |(STM32H7S78_DK_BSP_VERSION_SUB1 << 16)\ |(STM32H7S78_DK_BSP_VERSION_SUB2 << 8)\ |(STM32H7S78_DK_BSP_VERSION_RC)) #define STM32H7S78_DK_BSP_BOARD_NAME "STM32H7S78-DK" #define STM32H7S78_DK_BSP_BOARD_ID "MB1736C" /** @defgroup STM32H7S78_DK_LOW_LEVEL_LED EVAL LOW LEVEL LED * @{ */ #define LD1_GPIO_PORT GPIOO #define LD1_PIN GPIO_PIN_1 #define LD2_GPIO_PORT GPIOO #define LD2_PIN GPIO_PIN_5 #define LD3_GPIO_PORT GPIOM #define LD3_PIN GPIO_PIN_2 #define LD4_GPIO_PORT GPIOM #define LD4_PIN GPIO_PIN_3 #define LD1_GPIO_CLK_ENABLE() __HAL_RCC_GPIOO_CLK_ENABLE() #define LD1_GPIO_CLK_DISABLE() __HAL_RCC_GPIOO_CLK_DISABLE() #define LD2_GPIO_CLK_ENABLE() __HAL_RCC_GPIOO_CLK_ENABLE() #define LD2_GPIO_CLK_DISABLE() __HAL_RCC_GPIOO_CLK_DISABLE() #define LD3_GPIO_CLK_ENABLE() __HAL_RCC_GPIOM_CLK_ENABLE() #define LD3_GPIO_CLK_DISABLE() __HAL_RCC_GPIOM_CLK_DISABLE() #define LD4_GPIO_CLK_ENABLE() __HAL_RCC_GPIOM_CLK_ENABLE() #define LD4_GPIO_CLK_DISABLE() __HAL_RCC_GPIOM_CLK_DISABLE() /** * @} */ /** @defgroup STM32H7S78_DK_LOW_LEVEL_BUTTON LOW LEVEL BUTTON * @{ */ /* Button state */ #define BUTTON_RELEASED 0U #define BUTTON_PRESSED 1U /** * @brief USER push-button */ #define BUTTON_USER_PIN GPIO_PIN_13 #define BUTTON_USER_GPIO_PORT GPIOC #define BUTTON_USER_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() #define BUTTON_USER_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE() #define BUTTON_USER_EXTI_IRQn EXTI13_IRQn #define BUTTON_USER_EXTI_LINE EXTI_LINE_13 /** * @} */ /** @defgroup STM32H7S78_DK_LOW_LEVEL_COM LOW LEVEL COM * @{ */ #if (USE_BSP_COM_FEATURE > 0) /** * @brief Definition for COM port1, connected to UART4 */ #define COM1_UART UART4 #define COM1_CLK_ENABLE() __HAL_RCC_UART4_CLK_ENABLE() #define COM1_CLK_DISABLE() __HAL_RCC_UART4_CLK_DISABLE() #define COM1_TX_PIN GPIO_PIN_1 #define COM1_TX_GPIO_PORT GPIOD #define COM1_TX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE() #define COM1_TX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE() #define COM1_TX_AF GPIO_AF8_UART4 #define COM1_RX_PIN GPIO_PIN_0 #define COM1_RX_GPIO_PORT GPIOD #define COM1_RX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE() #define COM1_RX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE() #define COM1_RX_AF GPIO_AF8_UART4 /** * @brief Definition for COM port2, connected to UART7 */ #define COM2_UART UART7 #define COM2_CLK_ENABLE() __HAL_RCC_UART7_CLK_ENABLE() #define COM2_CLK_DISABLE() __HAL_RCC_UART7_CLK_DISABLE() #define COM2_TX_PIN GPIO_PIN_8 #define COM2_TX_GPIO_PORT GPIOE #define COM2_TX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE() #define COM2_TX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE() #define COM2_TX_AF GPIO_AF7_UART7 #define COM2_RX_PIN GPIO_PIN_7 #define COM2_RX_GPIO_PORT GPIOE #define COM2_RX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE() #define COM2_RX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE() #define COM2_RX_AF GPIO_AF7_UART7 #define COM_POLL_TIMEOUT 1000 #define MX_UART_InitTypeDef COM_InitTypeDef #endif /* USE_BSP_COM_FEATURE > 0 */ /** * @} */ /** * @} */ /** @addtogroup STM32H7S78_DK_LOW_LEVEL_Exported_Variables * @{ */ extern EXTI_HandleTypeDef hpb_exti[]; #if (USE_BSP_COM_FEATURE > 0) extern UART_HandleTypeDef hcom_uart[]; extern USART_TypeDef *COM_UART[]; #endif /* USE_BSP_COM_FEATURE > 0 */ /** * @} */ /** @defgroup STM32H7S78_DK_LOW_LEVEL_Exported_FunctionsPrototypes Exported Functions Prototypes * @{ */ int32_t BSP_GetVersion(void); const uint8_t *BSP_GetBoardName(void); const uint8_t *BSP_GetBoardID(void); int32_t BSP_LED_Init(Led_TypeDef Led); int32_t BSP_LED_DeInit(Led_TypeDef Led); int32_t BSP_LED_On(Led_TypeDef Led); int32_t BSP_LED_Off(Led_TypeDef Led); int32_t BSP_LED_Toggle(Led_TypeDef Led); int32_t BSP_LED_GetState(Led_TypeDef Led); int32_t BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef ButtonMode); int32_t BSP_PB_DeInit(Button_TypeDef Button); int32_t BSP_PB_GetState(Button_TypeDef Button); void BSP_PB_Callback(Button_TypeDef Button); #if (USE_BSP_COM_FEATURE > 0) int32_t BSP_COM_Init(COM_TypeDef COM, COM_InitTypeDef *COM_Init); int32_t BSP_COM_DeInit(COM_TypeDef COM); #if (USE_COM_LOG > 0) int32_t BSP_COM_SelectLogPort(COM_TypeDef COM); #endif /* USE_COM_LOG > 0 */ #if (USE_HAL_UART_REGISTER_CALLBACKS == 1) int32_t BSP_COM_RegisterDefaultMspCallbacks(COM_TypeDef COM); int32_t BSP_COM_RegisterMspCallbacks(COM_TypeDef COM, BSP_COM_Cb_t *Callback); #endif /* USE_HAL_UART_REGISTER_CALLBACKS */ HAL_StatusTypeDef MX_UART4_Init(UART_HandleTypeDef *huart, MX_UART_InitTypeDef *COM_Init); HAL_StatusTypeDef MX_UART7_Init(UART_HandleTypeDef *huart, MX_UART_InitTypeDef *COM_Init); #endif /* (USE_BSP_COM_FEATURE > 0) */ void BSP_PB_IRQHandler(Button_TypeDef Button); /** * @} */ /** * @} */ /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /* STM32H7S78_DISCOVERY_H */