611 lines
23 KiB
C
611 lines
23 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32h7rsxx_hal_pwr_ex.h
|
|
* @author MCD Application Team
|
|
* @brief Header file of PWR HAL Extension module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2022 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef STM32H7RSxx_HAL_PWR_EX_H
|
|
#define STM32H7RSxx_HAL_PWR_EX_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif /* __cplusplus */
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32h7rsxx_hal_def.h"
|
|
|
|
/** @addtogroup STM32H7RSxx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup PWREx
|
|
* @{
|
|
*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
/** @defgroup PWREx_Exported_Types PWREx Exported Types
|
|
* @{
|
|
*/
|
|
/**
|
|
* @brief PWREx AVD configuration structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t AVDLevel; /*!< Specifies the AVD detection level.
|
|
This parameter can be a value of @ref PWREx_AVD_detection_level */
|
|
|
|
uint32_t Mode; /*!< Specifies the EXTI operating mode for the AVD event.
|
|
This parameter can be a value of @ref PWREx_AVD_Mode. */
|
|
} PWREx_AVDTypeDef;
|
|
|
|
/**
|
|
* @brief PWREx Wakeup pin configuration structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t WakeUpPin; /*!< Specifies the Wake-Up pin to be enabled.
|
|
This parameter can be a value of @ref PWR_WakeUp_Pins */
|
|
|
|
uint32_t PinPolarity; /*!< Specifies the Wake-Up pin polarity.
|
|
This parameter can be a value of @ref PWREx_PIN_Polarity */
|
|
|
|
uint32_t PinPull; /*!< Specifies the Wake-Up pin pull.
|
|
This parameter can be a value of @ref PWREx_PIN_Pull */
|
|
} PWREx_WakeupPinTypeDef;
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
|
|
/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup PWREx_PIN_Polarity PWREx Pin Polarity configuration
|
|
* @{
|
|
*/
|
|
#define PWR_PIN_POLARITY_HIGH (0x0U)
|
|
#define PWR_PIN_POLARITY_LOW (0x1U)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWREx_PIN_Pull PWREx Pin Pull configuration
|
|
* @{
|
|
*/
|
|
#define PWR_PIN_NO_PULL (0x0U)
|
|
#define PWR_PIN_PULL_UP (0x1U)
|
|
#define PWR_PIN_PULL_DOWN (0x2U)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWREx_Wakeup_Pins_Flags PWREx Wakeup Pins Flags.
|
|
* @{
|
|
*/
|
|
#define PWR_WAKEUP_FLAG1 PWR_WKUPFR_WKUPF1 /*!< Wakeup flag on PA0 */
|
|
#define PWR_WAKEUP_FLAG2 PWR_WKUPFR_WKUPF2 /*!< Wakeup flag on PA2 */
|
|
#define PWR_WAKEUP_FLAG3 PWR_WKUPFR_WKUPF3 /*!< Wakeup flag on PC13 */
|
|
#define PWR_WAKEUP_FLAG4 PWR_WKUPFR_WKUPF4 /*!< Wakeup flag on PC1 */
|
|
|
|
#define PWR_WAKEUP_FLAG_ALL (PWR_WKUPFR_WKUPF1 | PWR_WKUPFR_WKUPF2 |\
|
|
PWR_WKUPFR_WKUPF3 | PWR_WKUPFR_WKUPF4)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWREx_Supply_configuration PWREx Supply configuration
|
|
* @{
|
|
*/
|
|
#define PWR_LDO_SUPPLY PWR_CSR2_LDOEN /*!< Core domains are supplied from the LDO */
|
|
#define PWR_EXTERNAL_SOURCE_SUPPLY PWR_CSR2_BYPASS /*!< The SMPS disabled and the LDO Bypass. The Core domains are supplied from an external source */
|
|
#define PWR_DIRECT_SMPS_SUPPLY PWR_CSR2_SDEN /*!< Core domains are supplied from the SMPS only */
|
|
|
|
#define PWR_SMPS_1V8_SUPPLIES_LDO (PWR_CSR2_SDHILEVEL | PWR_CSR2_SDEN | PWR_CSR2_LDOEN) /*!< The SMPS 1.8V output supplies the LDO which supplies the Core domains */
|
|
#define PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO (PWR_CSR2_SDHILEVEL | PWR_CSR2_SMPSEXTHP | PWR_CSR2_SDEN | PWR_CSR2_LDOEN) /*!< The SMPS 1.8V output supplies external circuits and the LDO. The Core domains are supplied from the LDO */
|
|
#define PWR_SMPS_1V8_SUPPLIES_EXT (PWR_CSR2_SDHILEVEL | PWR_CSR2_SMPSEXTHP | PWR_CSR2_SDEN | PWR_CSR2_BYPASS) /*!< The SMPS 1.8V output supplies external source which supplies the Core domains */
|
|
|
|
#define PWR_SUPPLY_CONFIG_MASK (PWR_CSR2_SDHILEVEL | PWR_CSR2_SMPSEXTHP | \
|
|
PWR_CSR2_SDEN | PWR_CSR2_LDOEN | PWR_CSR2_BYPASS)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/** @defgroup PWREx_AVD_detection_level PWREx AVD detection level
|
|
* @{
|
|
*/
|
|
#define PWR_AVDLEVEL_1 (0x0U) /*!< Analog voltage detector level 1 : 1V7 */
|
|
#define PWR_AVDLEVEL_2 PWR_CR1_ALS_0 /*!< Analog voltage detector level 2 : 2V1 */
|
|
#define PWR_AVDLEVEL_3 PWR_CR1_ALS_1 /*!< Analog voltage detector level 3 : 2V5 */
|
|
#define PWR_AVDLEVEL_4 (PWR_CR1_ALS_1 | PWR_CR1_ALS_0) /*!< Analog voltage detector level 4 : 2V8 */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWREx_AVD_Mode PWREx AVD Mode
|
|
* @{
|
|
*/
|
|
#define PWR_AVD_MODE_NORMAL (0x00000000U) /*!< Basic mode is used */
|
|
#define PWR_AVD_MODE_IT_RISING (0x00010001U) /*!< External Interrupt Mode with Rising edge trigger detection */
|
|
#define PWR_AVD_MODE_IT_FALLING (0x00010002U) /*!< External Interrupt Mode with Falling edge trigger detection */
|
|
#define PWR_AVD_MODE_IT_RISING_FALLING (0x00010003U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
|
|
#define PWR_AVD_MODE_EVENT_RISING (0x00020001U) /*!< Event Mode with Rising edge trigger detection */
|
|
#define PWR_AVD_MODE_EVENT_FALLING (0x00020002U) /*!< Event Mode with Falling edge trigger detection */
|
|
#define PWR_AVD_MODE_EVENT_RISING_FALLING (0x00020003U) /*!< Event Mode with Rising/Falling edge trigger detection */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWREx_Regulator_Voltage_Scale PWREx Regulator Voltage Scale
|
|
* @{
|
|
*/
|
|
#define PWR_REGULATOR_STOP_VOLTAGE_SCALE3 PWR_CR1_SVOS /*!< System Stop mode voltage scaling range 3 (highest frequency) */
|
|
#define PWR_REGULATOR_STOP_VOLTAGE_SCALE5 (0x0U) /*!< System Stop mode voltage scaling range 5 (lowest power) */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWREx_VBAT_Battery_Charging_Resistor PWR battery charging resistor selection
|
|
* @{
|
|
*/
|
|
#define PWR_BATTERY_CHARGING_RESISTOR_5 (0x0U) /*!< VBAT charging through a 5 kOhms resistor */
|
|
#define PWR_BATTERY_CHARGING_RESISTOR_1_5 PWR_CSR2_VBRS /*!< VBAT charging through a 1.5 kOhms resistor */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWREx_VBAT_Thresholds PWREx VBAT Thresholds
|
|
* @{
|
|
*/
|
|
#define PWR_VBAT_BETWEEN_HIGH_LOW_THRESHOLD (0x0U)
|
|
#define PWR_VBAT_BELOW_LOW_THRESHOLD PWR_CSR1_VBATL
|
|
#define PWR_VBAT_ABOVE_HIGH_THRESHOLD PWR_CSR1_VBATH
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWREx_TEMP_Thresholds PWREx Temperature Thresholds
|
|
* @{
|
|
*/
|
|
#define PWR_TEMP_BETWEEN_HIGH_LOW_THRESHOLD (0x00000000U)
|
|
#define PWR_TEMP_BELOW_LOW_THRESHOLD PWR_CSR1_TEMPL
|
|
#define PWR_TEMP_ABOVE_HIGH_THRESHOLD PWR_CSR1_TEMPH
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWREx_CAPACITOR_Port PWREx Capacitor Port
|
|
* @{
|
|
*/
|
|
#define PWR_CAPACITOR_PORT1 PWR_CSR2_XSPICAP1
|
|
#define PWR_CAPACITOR_PORT2 PWR_CSR2_XSPICAP2
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWREx_CAPACITOR_Value PWREx Capacitor Value
|
|
* @{
|
|
*/
|
|
#define PWR_CAPACITOR_OFF (0x0U)
|
|
#define PWR_CAPACITOR_ONE_THIRD_CAPACITANCE PWR_CSR2_XSPICAP1_0
|
|
#define PWR_CAPACITOR_TWO_THIRD_CAPACITANCE PWR_CSR2_XSPICAP1_1
|
|
#define PWR_CAPACITOR_FULL_CAPACITANCE PWR_CSR2_XSPICAP1
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWREx_AVD_EXTI_Line PWREx AVD EXTI Line 16
|
|
* @{
|
|
*/
|
|
#define PWR_EXTI_LINE_AVD EXTI_IMR1_IM16 /*!< External interrupt line 16 connected to the AVD EXTI Line */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWREx_GPIO_PullUp_Port PWR Extended GPIO Pull-Up Port
|
|
* @{
|
|
*/
|
|
#define PWR_GPIO_PULLUP_PORT_N (0x00U) /*!< GPIO port N */
|
|
#define PWR_GPIO_PULLUP_PORT_O (0x01U) /*!< GPIO port O */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWREx_GPIO_PullDown_Port PWR Extended GPIO Pull-Down Port
|
|
* @{
|
|
*/
|
|
#define PWR_GPIO_PULLDOWN_PORT_N (0x00U) /*!< GPIO port N */
|
|
#define PWR_GPIO_PULLDOWN_PORT_O (0x01U) /*!< GPIO port O */
|
|
#define PWR_GPIO_PULLDOWN_PORT_P (0x02U) /*!< GPIO port P */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWREx_GPIO_PullUp_Pin_Mask PWR Extended GPIO Pull-Up Pin Mask
|
|
* @{
|
|
*/
|
|
#define PWR_GPIO_N_PULLUP_PIN_1 (0x0002U) /*!< GPIO N pin 1 */
|
|
#define PWR_GPIO_N_PULLUP_PIN_6 (0x0040U) /*!< GPIO N pin 6 */
|
|
#define PWR_GPIO_N_PULLUP_PIN_12 (0x1000U) /*!< GPIO N pin 12 */
|
|
|
|
#define PWR_GPIO_O_PULLUP_PIN_0 (0x0001U) /*!< GPIO O pin 0 */
|
|
#define PWR_GPIO_O_PULLUP_PIN_1 (0x0002U) /*!< GPIO O pin 1 */
|
|
#define PWR_GPIO_O_PULLUP_PIN_4 (0x0010U) /*!< GPIO O pin 4 */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWREx_GPIO_PullDown_Pin_Mask PWR Extended GPIO Pull-Down Pin Mask
|
|
* @{
|
|
*/
|
|
#define PWR_GPIO_N_PULLDOWN_PIN_0 (0x0001U) /*!< GPIO N pin 0 */
|
|
#define PWR_GPIO_N_PULLDOWN_PIN_1 (0x0002U) /*!< GPIO N pin 1 */
|
|
#define PWR_GPIO_N_PULLDOWN_PIN_2_5 (0x0004U) /*!< GPIO N pin 2 to 5 */
|
|
#define PWR_GPIO_N_PULLDOWN_PIN_6 (0x0040U) /*!< GPIO N pin 6 */
|
|
#define PWR_GPIO_N_PULLDOWN_PIN_8_11 (0x0100U) /*!< GPIO N pin 8 to 11 */
|
|
#define PWR_GPIO_N_PULLDOWN_PIN_12 (0x1000U) /*!< GPIO N pin 12 */
|
|
|
|
#define PWR_GPIO_O_PULLDOWN_PIN_0 (0x0001U) /*!< GPIO O pin 0 */
|
|
#define PWR_GPIO_O_PULLDOWN_PIN_1 (0x0002U) /*!< GPIO O pin 1 */
|
|
#define PWR_GPIO_O_PULLDOWN_PIN_2 (0x0004U) /*!< GPIO O pin 2 */
|
|
#define PWR_GPIO_O_PULLDOWN_PIN_3 (0x0008U) /*!< GPIO O pin 3 */
|
|
#define PWR_GPIO_O_PULLDOWN_PIN_4 (0x0010U) /*!< GPIO O pin 4 */
|
|
|
|
#define PWR_GPIO_P_PULLDOWN_PIN_0_3 (0x0001U) /*!< GPIO P pin 0 to 3 */
|
|
#define PWR_GPIO_P_PULLDOWN_PIN_4_7 (0x0010U) /*!< GPIO P pin 4 to 7 */
|
|
#define PWR_GPIO_P_PULLDOWN_PIN_8_11 (0x0100U) /*!< GPIO P pin 8 to 11 */
|
|
#define PWR_GPIO_P_PULLDOWN_PIN_12_15 (0x1000U) /*!< GPIO P pin 12 to 15 */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
|
|
/** @defgroup PWREx_Exported_Macro PWREx Exported Macro
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enable the AVD EXTI Line 16.
|
|
* @retval None.
|
|
*/
|
|
#define __HAL_PWR_AVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR1, PWR_EXTI_LINE_AVD)
|
|
|
|
/**
|
|
* @brief Disable the AVD EXTI Line 16
|
|
* @retval None.
|
|
*/
|
|
#define __HAL_PWR_AVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR1, PWR_EXTI_LINE_AVD)
|
|
|
|
/**
|
|
* @brief Enable event on AVD EXTI Line 16.
|
|
* @retval None.
|
|
*/
|
|
#define __HAL_PWR_AVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR1, PWR_EXTI_LINE_AVD)
|
|
|
|
/**
|
|
* @brief Disable event on AVD EXTI Line 16.
|
|
* @retval None.
|
|
*/
|
|
#define __HAL_PWR_AVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR1, PWR_EXTI_LINE_AVD)
|
|
|
|
/**
|
|
* @brief Enable the AVD Extended Interrupt Rising Trigger.
|
|
* @retval None.
|
|
*/
|
|
#define __HAL_PWR_AVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR1, PWR_EXTI_LINE_AVD)
|
|
|
|
/**
|
|
* @brief Disable the AVD Extended Interrupt Rising Trigger.
|
|
* @retval None.
|
|
*/
|
|
#define __HAL_PWR_AVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR1, PWR_EXTI_LINE_AVD)
|
|
|
|
/**
|
|
* @brief Enable the AVD Extended Interrupt Falling Trigger.
|
|
* @retval None.
|
|
*/
|
|
#define __HAL_PWR_AVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR1, PWR_EXTI_LINE_AVD)
|
|
|
|
/**
|
|
* @brief Disable the AVD Extended Interrupt Falling Trigger.
|
|
* @retval None.
|
|
*/
|
|
#define __HAL_PWR_AVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR1, PWR_EXTI_LINE_AVD)
|
|
|
|
/**
|
|
* @brief Enable the AVD Extended Interrupt Rising and Falling Trigger.
|
|
* @retval None.
|
|
*/
|
|
#define __HAL_PWR_AVD_EXTI_ENABLE_RISING_FALLING_EDGE() \
|
|
do { \
|
|
__HAL_PWR_AVD_EXTI_ENABLE_RISING_EDGE(); \
|
|
__HAL_PWR_AVD_EXTI_ENABLE_FALLING_EDGE(); \
|
|
} while(0);
|
|
|
|
/**
|
|
* @brief Disable the AVD Extended Interrupt Rising & Falling Trigger.
|
|
* @retval None.
|
|
*/
|
|
#define __HAL_PWR_AVD_EXTI_DISABLE_RISING_FALLING_EDGE() \
|
|
do { \
|
|
__HAL_PWR_AVD_EXTI_DISABLE_RISING_EDGE(); \
|
|
__HAL_PWR_AVD_EXTI_DISABLE_FALLING_EDGE(); \
|
|
} while(0);
|
|
|
|
/**
|
|
* @brief Check whether the specified AVD EXTI interrupt flag is set or not.
|
|
* @retval EXTI AVD Line Status.
|
|
*/
|
|
#define __HAL_PWR_AVD_EXTI_GET_FLAG() ((READ_BIT(EXTI->PR1, PWR_EXTI_LINE_AVD) == PWR_EXTI_LINE_AVD) ? 1UL : 0UL)
|
|
|
|
/**
|
|
* @brief Clear the AVD EXTI flag.
|
|
* @retval None.
|
|
*/
|
|
#define __HAL_PWR_AVD_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR1, PWR_EXTI_LINE_AVD)
|
|
|
|
/**
|
|
* @brief Generates a Software interrupt on AVD EXTI line.
|
|
* @retval None.
|
|
*/
|
|
#define __HAL_PWR_AVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, PWR_EXTI_LINE_AVD)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
|
|
/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup PWREx_Exported_Functions_Group1 Power Supply Control Functions
|
|
* @{
|
|
*/
|
|
/* Power supply control functions */
|
|
HAL_StatusTypeDef HAL_PWREx_ConfigSupply(uint32_t SupplySource);
|
|
uint32_t HAL_PWREx_GetSupplyConfig(void);
|
|
|
|
/* Power voltage scaling functions */
|
|
HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling);
|
|
uint32_t HAL_PWREx_GetVoltageRange(void);
|
|
HAL_StatusTypeDef HAL_PWREx_ControlStopModeVoltageScaling(uint32_t VoltageScaling);
|
|
uint32_t HAL_PWREx_GetStopModeVoltageRange(void);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup PWREx_Exported_Functions_Group2 Low Power Control Functions
|
|
* @{
|
|
*/
|
|
/* Flash low power control functions */
|
|
void HAL_PWREx_EnableFlashPowerDown(void);
|
|
void HAL_PWREx_DisableFlashPowerDown(void);
|
|
|
|
/* Wakeup Pins control functions */
|
|
void HAL_PWREx_EnableWakeUpPin(const PWREx_WakeupPinTypeDef *sPinParams);
|
|
void HAL_PWREx_DisableWakeUpPin(uint32_t WakeUpPin);
|
|
uint32_t HAL_PWREx_GetWakeupFlag(uint32_t WakeUpFlag);
|
|
HAL_StatusTypeDef HAL_PWREx_ClearWakeupFlag(uint32_t WakeUpFlag);
|
|
|
|
/* Power Wakeup PIN IRQ Handler */
|
|
void HAL_PWREx_WAKEUP_PIN_IRQHandler(void);
|
|
void HAL_PWREx_WKUP1_Callback(void);
|
|
void HAL_PWREx_WKUP2_Callback(void);
|
|
void HAL_PWREx_WKUP3_Callback(void);
|
|
void HAL_PWREx_WKUP4_Callback(void);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup PWREx_Exported_Functions_Group3 Peripherals Control Functions
|
|
* @{
|
|
*/
|
|
/* Backup regulator control functions */
|
|
HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void);
|
|
HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void);
|
|
|
|
/* USB regulator control functions */
|
|
void HAL_PWREx_EnableUSBReg(void);
|
|
void HAL_PWREx_DisableUSBReg(void);
|
|
HAL_StatusTypeDef HAL_PWREx_EnableUSBVoltageDetector(void);
|
|
HAL_StatusTypeDef HAL_PWREx_DisableUSBVoltageDetector(void);
|
|
void HAL_PWREx_EnableUSBHSregulator(void);
|
|
void HAL_PWREx_DisableUSBHSregulator(void);
|
|
|
|
/* USB regulator control functions */
|
|
void HAL_PWREx_EnableUCPDStandbyMode(void);
|
|
void HAL_PWREx_DisableUCPDStandbyMode(void);
|
|
void HAL_PWREx_EnableUCPDDeadBattery(void);
|
|
void HAL_PWREx_DisableUCPDDeadBattery(void);
|
|
|
|
/* Battery control functions */
|
|
void HAL_PWREx_EnableBatteryCharging(uint32_t ResistorValue);
|
|
void HAL_PWREx_DisableBatteryCharging(void);
|
|
|
|
/* Analog Booster functions */
|
|
void HAL_PWREx_EnableAnalogBooster(void);
|
|
void HAL_PWREx_DisableAnalogBooster(void);
|
|
|
|
/* XSPIM_P1 functions */
|
|
void HAL_PWREx_EnableXSPIM1(void);
|
|
void HAL_PWREx_DisableXSPIM1(void);
|
|
|
|
/* XSPIM_P2 functions */
|
|
void HAL_PWREx_EnableXSPIM2(void);
|
|
void HAL_PWREx_DisableXSPIM2(void);
|
|
|
|
/* PORT capacitor control functions */
|
|
void HAL_PWREx_ConfigXSPIPortCap(uint32_t PortCapacitor, uint32_t PortCapacitorSetting);
|
|
uint32_t HAL_PWREx_GetConfigXSPIPortCap(uint32_t PortCapacitor);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup PWREx_Exported_Functions_Group4 Power Monitoring functions
|
|
* @{
|
|
*/
|
|
/* Power VBAT/Temperature monitoring functions */
|
|
void HAL_PWREx_EnableMonitoring(void);
|
|
void HAL_PWREx_DisableMonitoring(void);
|
|
uint32_t HAL_PWREx_GetTemperatureLevel(void);
|
|
uint32_t HAL_PWREx_GetVBATLevel(void);
|
|
|
|
/* Power AVD configuration functions */
|
|
void HAL_PWREx_ConfigAVD(const PWREx_AVDTypeDef *sConfigAVD);
|
|
void HAL_PWREx_EnableAVD(void);
|
|
void HAL_PWREx_DisableAVD(void);
|
|
|
|
/* Power PVD/AVD IRQ Handler */
|
|
void HAL_PWREx_PVD_AVD_IRQHandler(void);
|
|
void HAL_PWREx_PVD_AVD_Callback(void);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup PWREx_Exported_Functions_Group5 I/O Pull-Up Pull-Down Configuration Functions
|
|
* @{
|
|
*/
|
|
/* GPIO Pull-up Pull-down configuration functions */
|
|
void HAL_PWREx_EnablePullUpPullDownConfig(void);
|
|
void HAL_PWREx_DisablePullUpPullDownConfig(void);
|
|
|
|
/* GPIO Pull control functions */
|
|
HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullUp(uint32_t GPIO_Port, uint32_t GPIO_Pin);
|
|
HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullUp(uint32_t GPIO_Port, uint32_t GPIO_Pin);
|
|
HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullDown(uint32_t GPIO_Port, uint32_t GPIO_Pin);
|
|
HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullDown(uint32_t GPIO_Port, uint32_t GPIO_Pin);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
/* Private types -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private constants ---------------------------------------------------------*/
|
|
/* Private macros ------------------------------------------------------------*/
|
|
/** @defgroup PWREx_Private_Macros PWREx Private Macros
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters
|
|
* @{
|
|
*/
|
|
/* Check PWR regulator configuration parameter */
|
|
#define IS_PWR_SUPPLY(PWR_SOURCE) (((PWR_SOURCE) == PWR_LDO_SUPPLY) ||\
|
|
((PWR_SOURCE) == PWR_DIRECT_SMPS_SUPPLY) ||\
|
|
((PWR_SOURCE) == PWR_SMPS_1V8_SUPPLIES_LDO) ||\
|
|
((PWR_SOURCE) == PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO) ||\
|
|
((PWR_SOURCE) == PWR_SMPS_1V8_SUPPLIES_EXT) ||\
|
|
((PWR_SOURCE) == PWR_EXTERNAL_SOURCE_SUPPLY))
|
|
|
|
/* Check PWR regulator configuration in STOP mode parameter */
|
|
#define IS_PWR_STOP_MODE_REGULATOR_VOLTAGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_STOP_VOLTAGE_SCALE3) ||\
|
|
((VOLTAGE) == PWR_REGULATOR_STOP_VOLTAGE_SCALE5))
|
|
|
|
/* Check wake up pin polarity parameter */
|
|
#define IS_PWR_WAKEUP_PIN_POLARITY(POLARITY) (((POLARITY) == PWR_PIN_POLARITY_HIGH) ||\
|
|
((POLARITY) == PWR_PIN_POLARITY_LOW))
|
|
|
|
/* Check wake up pin pull configuration parameter */
|
|
#define IS_PWR_WAKEUP_PIN_PULL(PULL) (((PULL) == PWR_PIN_NO_PULL) ||\
|
|
((PULL) == PWR_PIN_PULL_UP) ||\
|
|
((PULL) == PWR_PIN_PULL_DOWN))
|
|
|
|
/* Check wake up flag parameter */
|
|
#define IS_PWR_WAKEUP_FLAG(FLAG) (((FLAG) == PWR_WAKEUP_FLAG1) ||\
|
|
((FLAG) == PWR_WAKEUP_FLAG2) ||\
|
|
((FLAG) == PWR_WAKEUP_FLAG3) ||\
|
|
((FLAG) == PWR_WAKEUP_FLAG4) ||\
|
|
((FLAG) == PWR_WAKEUP_FLAG_ALL))
|
|
|
|
/* Check wake up flag parameter */
|
|
#define IS_PWR_AVD_LEVEL(LEVEL) (((LEVEL) == PWR_AVDLEVEL_1) ||\
|
|
((LEVEL) == PWR_AVDLEVEL_2) ||\
|
|
((LEVEL) == PWR_AVDLEVEL_3) ||\
|
|
((LEVEL) == PWR_AVDLEVEL_4))
|
|
|
|
/* Check AVD mode parameter */
|
|
#define IS_PWR_AVD_MODE(MODE) (((MODE) == PWR_AVD_MODE_IT_RISING) ||\
|
|
((MODE) == PWR_AVD_MODE_IT_FALLING) ||\
|
|
((MODE) == PWR_AVD_MODE_IT_RISING_FALLING) ||\
|
|
((MODE) == PWR_AVD_MODE_EVENT_RISING) ||\
|
|
((MODE) == PWR_AVD_MODE_EVENT_FALLING) ||\
|
|
((MODE) == PWR_AVD_MODE_NORMAL) ||\
|
|
((MODE) == PWR_AVD_MODE_EVENT_RISING_FALLING))
|
|
|
|
/* Check resistor battery parameter */
|
|
#define IS_PWR_BATTERY_RESISTOR_SELECT(RESISTOR) (((RESISTOR) == PWR_BATTERY_CHARGING_RESISTOR_5) ||\
|
|
((RESISTOR) == PWR_BATTERY_CHARGING_RESISTOR_1_5))
|
|
|
|
/* Check the capacitor port parameter */
|
|
#define IS_PWR_CAPACITOR(PORT) (((PORT) == PWR_CAPACITOR_PORT1) || \
|
|
((PORT) == PWR_CAPACITOR_PORT2))
|
|
|
|
/* Check the capacitor port setting parameter */
|
|
#define IS_PWR_CAPACITOR_SETTING(SETTING) (((SETTING) == PWR_CAPACITOR_OFF) || \
|
|
((SETTING) == PWR_CAPACITOR_ONE_THIRD_CAPACITANCE) || \
|
|
((SETTING) == PWR_CAPACITOR_TWO_THIRD_CAPACITANCE) || \
|
|
((SETTING) == PWR_CAPACITOR_FULL_CAPACITANCE))
|
|
|
|
/* Check GPIO Pull-Up Port parameter */
|
|
#define IS_PWR_GPIO_PULLPUP_PORT(GPIO_PORT) (((GPIO_PORT) == PWR_GPIO_PULLUP_PORT_N) ||\
|
|
((GPIO_PORT) == PWR_GPIO_PULLUP_PORT_O))
|
|
|
|
/* Check GPIO Pull-Down Port parameter */
|
|
#define IS_PWR_GPIO_PULLDOWN_PORT(GPIO_PORT) (((GPIO_PORT) == PWR_GPIO_PULLDOWN_PORT_N) ||\
|
|
((GPIO_PORT) == PWR_GPIO_PULLDOWN_PORT_O) ||\
|
|
((GPIO_PORT) == PWR_GPIO_PULLDOWN_PORT_P))
|
|
|
|
/* GPIO pin mask check macro */
|
|
#define IS_PWR_GPIO_PIN_MASK(BIT_MASK) ((((BIT_MASK) & GPIO_PIN_MASK) != 0U) && ((BIT_MASK) <= GPIO_PIN_MASK))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif /* __cplusplus */
|
|
|
|
|
|
#endif /* STM32H7RSxx_HAL_PWR_EX_H */
|
|
|