thomasandClaude Sonnet 5.5
66bb319423
Regeneration CubeMX (Appli) preparant le driver ST67W611M1 et la carte SD : - SPI4 (PE12/13/14, CS PF8) + DMA GPDMA1 canaux 4/5, SPI_RDY (PD12/EXTI12), CHIP_EN (PD13) et BOOT (PD15) pour la X-NUCLEO-67W61M1 sur l'Arduino - SDMMC1 + FatFs (appels d'init non generes dans main, IRQ SDMMC1 prio 14), PM14 en open-drain ; I2S6_CK sur PA5 pour liberer PC12 (SDMMC1_CK) - HAL UART retire ; USE_BSP_COM_FEATURE=0 - Audio preserve : ADF 4/16/24, prio IRQ 2, DMA canal 0 en priorite haute, GPDMA1_Channel2_IRQHandler deplace dans audio_irq.c (hors fichiers generes), BSP_MX_I2S6_Init (renommage dans le BSP pour eviter le conflit avec CubeMX) - Middlewares/ST/ST67W6X_Network_Driver, FatFs et sources HAL SPI/SD ajoutes (driver ST67 pas encore integre au build) Build et debug sous Linux : - gcc/toolchain-env.sh, gdbserver.sh, arm-gdb.sh : outils de STM32CubeIDE par glob ; flash.sh les retrouve ; ruby_compat.rb pour Ruby >= 3.2 (TouchGFX) - makefile_appli : sources SD/SPI/FatFs/audio_irq ; chmod +x des .out TouchGFX - Objets de build (*.o, *.d, *.su) retires de l'index (deja dans .gitignore) - AGENTS.md : toolchain Linux, configs VS Code (cppdbg et ST stlinkgdbtarget), pieges de l'extension ST (.settings/ide.store.json, preRunCommands reset) Verifie sur carte : audio OK, debug Appli/Boot OK. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
67 lines
2.1 KiB
C
67 lines
2.1 KiB
C
/**
|
|
******************************************************************************
|
|
* @file sd_diskio_config.h
|
|
* @brief Template for the sd_diskio_config.h. This file should be copied and
|
|
under project.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2024 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
#ifndef __SD_DISKIO_CONFIG_H
|
|
#define __SD_DISKIO_CONFIG_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
/* Includes ------------------------------------------------------------------*/
|
|
|
|
#include "stm32h7rsxx_hal.h"
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
|
|
/* Maximum waiting time to do an operation in the HAL_SD_ReadBlocks() and HAL_SD_WriteBlocks() */
|
|
#define SD_TIMEOUT 30000
|
|
|
|
/*
|
|
* Depending on the usecase, the SD card initialization could be done at the
|
|
* application level, if it is the case define the flag below to enable
|
|
* the MX_SD_Init().
|
|
*/
|
|
#define ENABLE_SD_INIT 0
|
|
|
|
/*
|
|
* when using cacheable memory region, it may be needed to maintain the cache
|
|
* validity. Enable the define below to activate a cache maintenance at each
|
|
* read and write operation.
|
|
* Notice: This is applicable only for cortex M7 based platform.
|
|
*/
|
|
|
|
#define ENABLE_SD_DMA_CACHE_MAINTENANCE 0
|
|
|
|
extern SD_HandleTypeDef hsd1;
|
|
|
|
/* Default handle used in sd_diskio.c file */
|
|
#define sdmmc_handle hsd1
|
|
|
|
/* Default Init function of sdmmc IP used in sd_diskio.c file */
|
|
#if (ENABLE_SD_INIT == 1)
|
|
extern void MX_SDMMC1_SD_Init(void);
|
|
#define sdmmc_sd_init MX_SDMMC1_SD_Init
|
|
#endif
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __SD_DISKIO_CONFIG_H */
|